AC speed control motor US2 series
Oriental Motor Co., Ltd.
About This Product
■Summary
・Equipped with a digital display panel and setting dial for easy operation of Kuru Kuru Pon
・Easy wiring just connect the motor and driver
・Output 6~90W
・Speed control range 90 to 1,400 (1,600) r/min
■Easy operation
Equipped with a digital display panel and setting dial, it can now be operated intuitively. It is so simple to use that anyone can use it without looking at the manual.
■Can be operated with “Curkuru Pon”
Turn the dial and set it to the desired value. Just press the dial to confirm the rotation speed.
■Switching start/stop/rotation direction
You can start/stop and change the rotation direction with a single switch operation. No need to install an external switch.
■Simple wiring
Just connect the motor and speed controller and connect it to a power source to start it immediately. The speed controller has a connector and a built-in capacitor, eliminating the need for troublesome connections and wiring.
■Maximum extension distance 10m
The motor and speed controller can be connected with one touch using a connector. The distance between the motor and speed controller can be extended up to 10m.
■Built-in capacitor
Built-in capacitor eliminates the hassle of wiring and saves space.
■Low noise and simple system configuration
The motor and speed controller used in the US2 series generate almost no self-noise. Therefore, fewer peripheral devices are needed to suppress noise, reducing installation effort, cost, and space.
■Stable operation even when the load fluctuates
By constantly checking the rotation speed with the rate generator installed in the AC motor, control is maintained to maintain the set speed even if the load fluctuates. Additionally, by digitalizing the control circuit, the speed fluctuation rate has been improved from -5% to ±1% (reference value).
-
Product
AC speed control motor US2 series
-
Handling Company
Oriental Motor Co., Ltd.
-
Categories
1 Models of AC speed control motor US2 series
| Product Image | Part Number | Price (excluding tax) | Circuit part mass | Maximum extension distance | Maximum output | Motor part mass | Mounting angle dimensions | Overheat protection device type | Power cable | Shaft/gear type | Speed control range | Starting torque (motor shaft) | Time rating |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SCM26A-EC+US2D6-EC |
Available upon quote | 0.3kg | 10 m | 6W | 0.8kg | 60mm | Impedance protection | None | Round shaft |
50Hz: 90-1400r/min 60Hz: 90-1600r/min |
Single phase 220 V / 50 Hz: 44 mN m Single phase 220 V / 60 Hz: 44 mN m Single phase 230 V / 50 Hz: 44 mN m Single phase 230 V / 60 Hz: 50 mN m |
Continuous |
Customers who viewed this product also viewed
Other products of Oriental Motor Co., Ltd.
View more products of Oriental Motor Co., Ltd.
About Company Handling This Product
- Japan