All Categories

History

Brushless motor BLE series RS-485 communication type-BLEM23-A+BLED3AM-R
Brushless motor BLE series RS-485 communication type-Oriental Motor Co., Ltd.

Brushless motor BLE series RS-485 communication type
Oriental Motor Co., Ltd.


About This Product

■Summary

・Supports data setting and operation command input via Modbus communication ・Output 30~120W ・Speed ​​control range (80) 100 to 4,000r/min

■Wide speed control range from low speed to high speed

100 * ~4,000r/min (speed ratio 1:40), allowing for wide speed control. *Can be expanded to 80 to 4,000 r/min (speed ratio 1:50) using data setter OPX-2A (sold separately), support software MEXE02, or RS-485 communication

■Thin and high power

Thin and high power, contributing to equipment downsizing. When compared to a three-phase induction motor with a 90mm mounting angle, the BLE series standard type has a 75mm shorter overall length, but the output is 1.3 times higher.

■Excellent speed stability

Speed ​​fluctuation rate is ±0.5% (relative to load) *. Even in applications where the load conditions change, it is possible to drive at stable speeds in all speed ranges from low to high speeds. *Can be improved to ±0.2% by using data setter OPX-2A (sold separately), support software MEXE02, or RS-485 communication

■Effective for energy saving

Brushless motors are highly efficient because they use permanent magnets to reduce secondary losses in the rotor. If you replace the inverter-controlled three-phase motor with the BLE series, it is possible to reduce power consumption by approximately 23%. This is a speed control motor that is effective for saving energy in equipment.

■Vertical drive + speed control possible (motor with electromagnetic brake*)

The BLE series motor with electromagnetic brake allows stable speed control even during vertical drive (lowering operation). Of course, it can be used not only for vertical drive, but also for load holding purposes during horizontal drive. *Each output comes with an electromagnetic brake.

■About connection with other companies' equipment

Information on connecting our network converter to other companies' touch panels and PLC network units is posted here. In addition to downloading screen samples and connection guides from target manufacturers, we also provide information on communication cables that allow direct connection between our products and other companies' equipment. Please take advantage of it as it can contribute to reducing the time required for program design and startup.

  • Product

    Brushless motor BLE series RS-485 communication type

Share this product


80+ people viewing

Last viewed: 19 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Brushless motor BLE series RS-485 communication type

Image Part Number Price (excluding tax) Electromagnetic brake Power input voltage tolerance range Power input Maximum input current Power input rated voltage Power input Rated frequency Power input Rated input current Power input frequency tolerance range Speed ​​fluctuation rate (vs. voltage) Speed ​​fluctuation rate (relative to load) Speed ​​fluctuation rate (vs. temperature) Speed ​​control range Allowable moment of inertia J Maximum instantaneous torque (motor shaft) Rated rotation speed (motor shaft) Rated output Rated torque (motor shaft) Circuit part mass Mounting angle dimensions Control power supply voltage tolerance range Control power supply voltage Rotor moment of inertia J Motor part mass Shaft/gear type
Brushless motor BLE series RS-485 communication type-Part Number-BLEM23-A+BLED3AM-R

BLEM23-A+BLED3AM-R

Available upon quote

None

-15~+10%

3.5A

Single phase 100-120V

50/60Hz

1.3A

±5%

±0.5% or less: Conditions: Rated voltage -15 to +10%, rated rotation speed, no load, room temperature

±0.5% or less: Conditions 0 to rated torque, rated rotation speed, rated voltage, room temperature

±0.5% or less: Conditions 0 to +50 ℃, rated rotation speed, no load, rated voltage

100-4000 r/min

1.8×10-4 kg m2

0.2 N m

3000 r/min

30W

0.1 N m

0.7kg

60mm

-15~+20%

DC24V

0.087×10-4 kg m2

0.6kg

Round shaft

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Brushless Motors Products

Other products of Oriental Motor Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Oriental Motor Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree