All Categories

History

  1. Metoree
  2. Clamps & Fasteners
  3. Soft Down Stays
  4. Swing lift up SLUL type (Sugatsune Industries Co., Ltd.)
Swing lift up SLUL type-SLUL-8
Swing lift up SLUL type-Sugatsune Industries Co., Ltd.

Swing lift up SLUL type
Sugatsune Industries Co., Ltd.

Sugatsune Industries Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

27.1hours

Relatively Fast Response

About This Product

■Features

・This stay is equipped with Rapcon and has lift assist and soft close functions. ・The door movement has been increased compared to conventional products, allowing for a wider opening in the height direction. - When the door is opened approximately 120-150mm towards you, it will open lightly with the force of the spring. ・Since it is attached to the bottom of the cabinet top plate, it is easy to locate the installation position. ・The door assist force adjustment function allows you to adjust the movement to suit the door better than conventional products. ・The door can be adjusted vertically, horizontally, and at an angle. ・Cleared 40,000 times opening/closing test ・Lift assist ・Soft close

■Note

・Please be sure to check the handling precautions. -One interlocking bar (sold separately) is required for each set of the main unit. - Be sure to attach the handle (sold separately) to the center of the door width. To make the door easier to open, please install it within 700mm from the top edge of the door. - Do not operate the product alone as it will have a force that tries to return to its original state. - Do not remove the fixing tape until the door is installed. The arm may jump up and cause injury.

  • Product

    Swing lift up SLUL type

Share this product


60+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Swing lift up SLUL type

Image Part Number Price (excluding tax) Door height Door mass kg Door width Operating temperature Specification Finishing Main material Accessories
Swing lift up SLUL type-Part Number-SLUL-8

SLUL-8

Available upon quote

550~900

5~8

900 or less

0~40℃

Lift assist soft close

Nickel plating

Steel

・Cross recessed countersunk tapping screw 3.5 x 45 (for mounting the main body)
・Cross recessed bind tapping screw 3.5 x 15 (for washer installation)

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Disc type soft down stay TM-281-L-TOCHIGIYA CO.,LTD.

Disc type soft down stay TM-281-L

TOCHIGIYA CO.,LTD.

$22.10

50+ people viewing

Last viewed: 21 hours ago

Response time: 48.08 hours

Soft Down Stays
Gas Spring Lift-O-Mat Standard Stock Item-Sugatsune Industries Co., Ltd.

Gas Spring Lift-O-Mat Standard Stock Item

Sugatsune Industries Co., Ltd.

90+ people viewing

Last viewed: 14 hours ago

Response time: 27.10 hours

Soft Down Stays

3 models listed

Foot stay YFN-300W 2 stage lock-Sugatsune Industries Co., Ltd.

Foot stay YFN-300W 2 stage lock

Sugatsune Industries Co., Ltd.

80+ people viewing

Response time: 27.10 hours

Soft Down Stays

2 models listed

Gas spring Lift-O-Mat resin eyelet specification-Sugatsune Industries Co., Ltd.

Gas spring Lift-O-Mat resin eyelet specification

Sugatsune Industries Co., Ltd.

80+ people viewing

Last viewed: 14 hours ago

Response time: 27.10 hours

Soft Down Stays

3 models listed

Stainless steel foot stay YFNS type-Sugatsune Industries Co., Ltd.

Stainless steel foot stay YFNS type

Sugatsune Industries Co., Ltd.

90+ people viewing

Response time: 27.10 hours

Soft Down Stays

2 models listed

Power assist stay S-AT type with side plate-Sugatsune Industries Co., Ltd.

Power assist stay S-AT type with side plate

Sugatsune Industries Co., Ltd.

110+ people viewing

Response time: 27.10 hours

Soft Down Stays

3 models listed

Gas spring lift-o-mat metal eyelet specification-Sugatsune Industries Co., Ltd.

Gas spring lift-o-mat metal eyelet specification

Sugatsune Industries Co., Ltd.

80+ people viewing

Last viewed: 5 hours ago

Response time: 27.10 hours

Soft Down Stays

3 models listed

Stainless steel foot stay YFNS-300W 2-stage lock-Sugatsune Industries Co., Ltd.

Stainless steel foot stay YFNS-300W 2-stage lock

Sugatsune Industries Co., Ltd.

70+ people viewing

Last viewed: 51 seconds ago

Response time: 27.10 hours

Soft Down Stays

2 models listed

Power assist stay S-ATS type with back plate-Sugatsune Industries Co., Ltd.

Power assist stay S-ATS type with back plate

Sugatsune Industries Co., Ltd.

70+ people viewing

Response time: 27.10 hours

Soft Down Stays

3 models listed

Gas spring Lift-O-Mat with ball studs on both sides-Sugatsune Industries Co., Ltd.

Gas spring Lift-O-Mat with ball studs on both sides

Sugatsune Industries Co., Ltd.

80+ people viewing

Last viewed: 8 hours ago

Response time: 27.10 hours

Soft Down Stays

3 models listed

Balance adjustable power assist stay S-ATJ type with side plate-Sugatsune Industries Co., Ltd.

Balance adjustable power assist stay S-ATJ type with side plate

Sugatsune Industries Co., Ltd.

100+ people viewing

Response time: 27.10 hours

Soft Down Stays

3 models listed

Swing lift down SLDL type-Sugatsune Industries Co., Ltd.

Swing lift down SLDL type

Sugatsune Industries Co., Ltd.

90+ people viewing

Last viewed: 11 hours ago

Response time: 27.10 hours

Soft Down Stays

2 models listed

See More Soft Down Stays Products

Other products of Sugatsune Industries Co., Ltd.

Reviews shown here are reviews of companies.

Spring hinge SA type-Sugatsune Industries Co., Ltd.

Spring hinge SA type

Sugatsune Industries Co., Ltd.

$50.05

70+ people viewing

Last viewed: 5 hours ago

Response time: 27.10 hours

Hinge Springs
All stainless steel catch clip SCC-60-Sugatsune Industries Co., Ltd.

All stainless steel catch clip SCC-60

Sugatsune Industries Co., Ltd.

$7.80

70+ people viewing

Last viewed: 19 hours ago

Response time: 27.10 hours

Catch Clips
Floor hinge MCHD1 type-Sugatsune Industries Co., Ltd.

Floor hinge MCHD1 type

Sugatsune Industries Co., Ltd.

$572.00

100+ people viewing

Last viewed: 2 hours ago

Response time: 27.10 hours

Floor Hinges
Index plunger 245-930 type 245-9305-Sugatsune Industries Co., Ltd.

Index plunger 245-930 type 245-9305

Sugatsune Industries Co., Ltd.

$12.16

90+ people viewing

Last viewed: 21 hours ago

Response time: 27.10 hours

Plungers

3 models listed

Stainless steel angle SV type-Sugatsune Industries Co., Ltd.

Stainless steel angle SV type

Sugatsune Industries Co., Ltd.

$6.24

70+ people viewing

Last viewed: 21 hours ago

Response time: 27.10 hours

Angle Brackets
Stainless steel shelf support BT type-Sugatsune Industries Co., Ltd.

Stainless steel shelf support BT type

Sugatsune Industries Co., Ltd.

$10.34

60+ people viewing

Last viewed: 21 hours ago

Response time: 27.10 hours

Triangle Corner Braces
Hinge pin type 203-0702-Sugatsune Industries Co., Ltd.

Hinge pin type 203-0702

Sugatsune Industries Co., Ltd.

$1.17

60+ people viewing

Last viewed: 21 hours ago

Response time: 27.10 hours

Hinge Pins
Angle adjustment fitting for tough light SL-WPG-Z-Sugatsune Industries Co., Ltd.

Angle adjustment fitting for tough light SL-WPG-Z

Sugatsune Industries Co., Ltd.

$51.35

70+ people viewing

Last viewed: 18 hours ago

Response time: 27.10 hours

Angle Adjustment Brackets
Back hinge TS-243 type-Sugatsune Industries Co., Ltd.

Back hinge TS-243 type

Sugatsune Industries Co., Ltd.

$21.78

60+ people viewing

Last viewed: 2 hours ago

Response time: 27.10 hours

Concealed Hinges
Push lock housing BMB removable lock series 1111-000-Sugatsune Industries Co., Ltd.

Push lock housing BMB removable lock series 1111-000

Sugatsune Industries Co., Ltd.

$5.72

70+ people viewing

Last viewed: 21 hours ago

Response time: 27.10 hours

Push Locks
Edge seal 304LB type-Sugatsune Industries Co., Ltd.

Edge seal 304LB type

Sugatsune Industries Co., Ltd.

$8.45

70+ people viewing

Last viewed: 21 hours ago

Response time: 27.10 hours

Flap Seals
One-way torque hinge HG-TQS15 type-Sugatsune Industries Co., Ltd.

One-way torque hinge HG-TQS15 type

Sugatsune Industries Co., Ltd.

90+ people viewing

Last viewed: 33 minutes ago

Response time: 27.10 hours

Torque Hinges

3 models listed


View more products of Sugatsune Industries Co., Ltd.

About Company Handling This Product

Sugatsune Industries Co., Ltd.

Response Rate

100.0%

Response Time

27.1hrs

  • Japan

Related search keywords

Soft Down Stays
Soft Down Stays　Sugatsune Industries Co., Ltd.
Sugatsune Industries Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree