4 -axis type Kunukune arm (pole mounting parts)
Thanko
About This Product
It is a "4 -axis kunikune monitor arm" that supports the LCD monitor with a maximum load capacity of 10 kg.
A durable thick arm supports a large monitor. The 4 -axis arm increases the degree of freedom of the front and rear movement and the placement of the monitor without shaking the left and right.
In addition, it is a super -cheap monitor arm that is 360 degrees rotation of the monitor, 2 clamps, adjusts height, and is comparable to expensive monitor arms.
■ Movement of arm
･ An arm with 4 axes.
･ If you extend from the pole to about 420 mm, and lower it to the front with the monitor facing the front, the folded arm will be 47mm behind the pole.
･ Approximately 180 ° from the first axis near Paul. The second axis swings about 180 ° left and right.
･ The arm to be attached to the pole is easy because it can be fixed just by tightening it with a lever.
･ You can determine the position of the monitor for your favorite height.
* The movable range of the upper and lower movable varies depending on the size of the monitor to be installed.
■ Movement of the monitor part
･ The monitor is movable about 180 ° both up, down, left and right.
･ For rotation, it is possible to turn 360 °.
■ Installation unit
･ Because it is tightened with two clamps, it is fixed firmly.
･ Since the clamp position can be adjusted up to 3 levels, it can be installed on a top plate of up to 88mm.
･ It comes with a sponge rubber that enhances the fixation without damaging the desk and top plate.
･ Many liquid crystal monitors are standardized to 75mm x 75mm and 100mm x 100mm.
･ This standard is called VESA standard.
･ Our liquid crystal monitor arm supports all models, VESA (Video Equipment Standardization Association) standard.
■ Cable wiring clip
･ As much as extended with the arm, cables such as power supply and output from the monitor will disturb the desk.
･ If you use the cable wiring clip attached to the arm, the cable will be attached along the arm, and it will be refreshing without disturbing the desk.
-
Product
4 -axis type Kunukune arm (pole mounting parts)
-
Handling Company
Thanko
1 Models of 4 -axis type Kunukune arm (pole mounting parts)
| Product Image | Part Number | Price (excluding tax) | Arm size | Compatible monitor | Jan | Load -bearing | Warranty period | package |
|---|---|---|---|---|---|---|---|---|
|
|
Marmp192b |
$ 28.80〜 | Please see the arm diagram. | VESA standard (75mmx75mm or 100mmx100mm) | 4560176606254 | 10kg | 6 months | Size: Width 130 x depth 495 x height 135 (mm) Weight (including content): 1.85kg |
Customers who viewed this product also viewed
Other products of Thanko
View more products of Thanko
