4 -axis type Kunukune Monitor Arm
Thanko
About This Product
It is a "4 -axis kunikune monitor arm" that supports the LCD monitor with a maximum load capacity of 10 kg.
A durable thick arm supports a large monitor. The 4 -axis arm increases the degree of freedom of the front and rear movement and the placement of the monitor without shaking the left and right.
In addition, it is a super -cheap monitor arm that is 360 degrees rotation of the monitor, 2 clamps, adjusts height, and is comparable to expensive monitor arms. Please choose from two colors, black and white.
■ Movement before and after the arm
・ 3 -axis arm. From the pole to up to 400mm.
・ An arm with 4 axes.
・ If you extend from the pole to about 420 mm, and lower it to the front with the monitor facing the front, the folded arm will be 47mm behind the pole.
■ Arm left and right movements
・ It moves about 180 ° left and right.
・ Approximately 180 ° from the first axis near Paul.
・ The second axis also swings about 180 ° left and right.
■ Movement on the arm up and down
・ Just tighten the lever without a tool. You can set an arm at a free height.
・ The arm to be attached to the pole is easy because it can be fixed just by tightening it with a lever.
・ You can determine the position of the monitor for your favorite height.
* The movable range of the upper and lower movable varies depending on the size of the monitor to be installed.
■ Movement of monitor, left and right, rotation
・ Approximately 180 °, about 180 ° left and right, 360 ° rotation 360 °
・ The monitor is movable about 180 ° both up, down, left and right.
・ For rotation, it is possible to turn 360 °.
・ Clamp (attached top plate)
・ Fixed with two clamps. Can be installed on a top plate of up to 88mm.
・ Sponge rubber that enhances fixation without damaging the top plate
・ Because it is tightened with two clamps, it is fixed firmly.
・ Since the clamp position can be adjusted up to 3 levels, it can be installed on a top plate of up to 88mm.
・ It comes with a sponge rubber that enhances the fixation without damaging the desk and top plate.
・ LCD monitor back, VESA standard
・ Many liquid crystal monitors are standardized to 75mm x 75mm and 100mm x 100mm.
・ This standard is called VESA standard.
・ Our liquid crystal monitor arm supports all models, VESA (Video Equipment Standardization Association) standard.
・ It gets in the way on the hanging desk
・ The cable is clean along the arm.
・ As much as extended with the arm, cables such as power supply and output from the monitor will disturb the desk.
・ If you use the cable wiring clip attached to the arm, the cable will be attached along the arm, and it will be refreshing without disturbing the desk.
-
-
Product
4 -axis type Kunukune Monitor Arm