Absolute O2 Analyzer S108
Senecom Co., Ltd.
About This Product
The S108 Absolute O2 Analyzer is the most flexible and accurate oxygen analyzer on the market. It uses a fuel cell sensor that operates at ambient temperature, unlike the power-hungry zirconium sensor. The sensor incorporates an acidic electrolyte and a Teflon diffusion membrane.
pO2 measurements are accurate over the entire range from 0% to 100%. For animal and human respiration measurements, the S108 Absolute O2 Analyzer can be used in conjunction with our S158 CO2 Analyzer to measure respiration. Respirometric measurements of smaller, less active organisms consist of stopped-flow or closed gas exchange systems.
Calibration is easy and requires only dry ambient air (use zero N2 gas for the most rigorous measurements) and maintains linearity over the entire dynamic range. We recommend using S108 with C901 Logger Pro software or other data acquisition software.
■Features
・Switchable between 0-25% and 0-100% O2
・Pressure sensor and signal correction
・Integrated gas pump
・O2 and P analog output 0-5V
・Response time (90%) 12 seconds
・O2 output displayed in % or kPa
・Pressure output display (kPa)
・Optional battery pack for use in the field
・Built-in temperature control and compensation
・Weatherproof case
・Stand-alone use or in combination with software
■Application
・Animal breathing
・Human breathing
・Environmental monitoring
・Field monitoring
-
Product
Absolute O2 Analyzer S108
-
Handling Company
Senecom Co., Ltd.
-
Categories
1 Models of Absolute O2 Analyzer S108
| Product Image | Part Number | Price (excluding tax) | Accuracy | Analog output | Average sensor lifespan | Detection range | Dimensions L×W×H (cm) | Effects of other gases | Gas pump | Maximum flow rate | Minimum flow rate | Operating temperature | Optional data | Power supply | Pressure effect | Pressure range | Resolution | Response time | Shockproof | Weight | Working principle |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
S108 |
Available upon quote | 0.21% of full scale | 0~5V |
Approximately 3-5 years Sensors can be easily replaced |
0~25% and 0~100%O2 (linear) | 27.7×25.5×11.2 | Ammonia and ozone | 0-650ml/min, default setting 100ml/min | 650mL/min | 5mL/min | 5~40℃ (effective range) | Interface and software | 12V | Output voltage changes proportionally | 0.5atm~1.5atm | ±40ppm | (90%) 12 seconds | Strong vibrations up to 2.7G are not allowed | 2.45kg | Acidic electrolyte, Teflon diffusion membrane |
Customers who viewed this product also viewed
Other products of Senecom Co., Ltd.
View more products of Senecom Co., Ltd.
About Company Handling This Product
- Japan