All Categories
History
Response Rate
100.0%
Response Time
39.1hours
Product
Meter relay level indicator LV1000Handling Company
U-Inix Co., Ltd.Categories
| Image | Part Number | Price (excluding tax) | Measurement type | Measurement method | Display | Display switching | Instantaneous display accuracy | Instantaneous display range | Instantaneous display sampling time | Instantaneous display Area zero display function | Instantaneous display Least significant digit | Instantaneous display Decimal point position | Instantaneous display Zero adjustment function | Instantaneous display scaling | Instantaneous display Over display | Percentage display range | Percentage display lamp | Percentage display Conversion method | Percentage display Over display | Level display update time | Level display method | Level indicator | Level display scale | Level display Over display | Linearization setting method | Linearize function selection | Sensor input temperature characteristics | Sensor input method | Sensor input disconnection detection function | Sensor supply power | Sensor GND switching selection | EXT input signal |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
LV1000 |
Available upon quote |
Instant measurement (displays proportional to input voltage and current) |
A/D conversion method |
Red LED 5 digits Character height: 10mm |
Instantaneous display, percentage display |
For full scale span analog input, |
-9,999 ~ 9,999 |
Averaged over 0.1 seconds ~ 10.0 seconds |
Displays “0” between two arbitrarily set display points. (Requires setting in “Mode No. 1” scaling setting area zero minimum/maximum display) |
Usually 0 (fixed), 0 or 5 |
10^-1, 10^-2, 10^-3, None |
If you press the "Shift" key + "Up" key for more than 2 seconds while the measurement is displayed, the current display will be adjusted to "0" (setting is required in "Mode No. 3") |
Set analog minimum/maximum input value and minimum/maximum display value |
-9,999" or "9,999" flashing OV lamp lit |
-999.9 ~ 999.9 |
Lights up while displaying the percentage display value (switch to instantaneous display using the "Enter" key on the front panel) |
Display scaling conversion between two points of instantaneous display value at 0.0% and 100.0% |
-999.9" or "999.9" flashes OV lamp lights up |
Follow display sampling time |
Turns on or off in 5.0% increments from 0.0 to 100.0% in conjunction with the percentage display value |
Arrangement of 1608 size LEDs (orange: 16 pieces, white: 4 pieces) (20 pieces in total) |
Displays 0, 25, 50, 75, 100 |
When exceeding 100.0% (100.1%~): All LEDs flash |
Broken line approximate value (21ch setting possible) |
Select enable/disable of linearize function (select with “Mode No.0”) |
±100ppm/℃ (0~50℃) |
Select from A2~A5 types (see analog input options) |
When "input signal ≦ -20%F.S.", it is determined that the wire is disconnected, and "- - - - -" flashes on both the instantaneous display and percentage display (valid for A2 and A3 types) |
DC24V (±5%) 150mA |
Short/open switching between terminal 9 (LO) and terminal 7 (sensor power supply GND) can be selected using the sensor GND selection switch (only for A2 to A5 types) |
NPN open collector or contact output (HD lamp lights up when ON) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
39.1hrs
