All Categories
History
Response Rate
100.0%
Response Time
39.1hours
Product
Digital panel meter Small instantaneous totalizing indicator SP-243Handling Company
U-Inix Co., Ltd.Categories
| Image | Part Number | Price (excluding tax) | Alarm output terminal | Alarm output mode | Alarm output comparison method | Alarm output 1 shot time | Measurement type | Measurement method | Display | Display switching | Total measurement display offset | Cumulative measurement accuracy | Integrated measurement display range | Total measurement Decimal point display | Integral measurement scaling method | Total measurement over display | Totalization display lamp | Accumulated synchronous pulse output | Instant measurement display sampling time | Instant measurement accuracy | Instant measurement display range | Instant measurement Least significant digit correction | Instant measurement Decimal point display | Instant measurement scaling method | Low cut | Sensor input terminal | Sensor input temperature characteristics | Sensor input A5 type | Sensor input A4 type | Sensor input A3 type | Sensor input A2 type | EXT input |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SP-243 |
Available upon quote |
Output from terminal block 3-4 (OUT1) and 5-4 (OUT2) (COM common) |
Select from Compare, Hold, or 1 shot |
Can be selected from upper/lower limit (immediate)/lower limit (delayed) |
Selectable from 8 steps from 30 ms to 2 s |
Instant measurement/integrated measurement |
A/D conversion method |
Red LED 5-digit display Character height: 7mm (zero blanking method) |
Switch between instantaneous display and integrated display using the "Display" key |
The integrated value after reset can be set arbitrarily in the range of 0 to 99,999 by setting the display offset value. |
±0.3% (F.S.) ±1digit (23℃) for analog input |
0 ~ 99,999 |
You can select from 1 to 4 digits below the decimal point. |
You can arbitrarily set the integrated value per hour at the maximum analog input value by mode setting. |
Can be selected from “99,999 blinking display”, “Endless display”, and “×10 display (when “99,999” is exceeded, the displayed value is multiplied by 10 and displayed)” |
“T” lamp (green) lights up while displaying integrated measurement value |
You can select whether or not to use integrated synchronized pulse output. |
Average display from 0.1 seconds to 100.0 seconds (can be set arbitrarily) |
±0.3% (F.S.) ±1digit (23℃) for analog input |
0~10,000 |
Selectable from “Normal”, “0 fixed”, “0 or 5 display” |
You can select from 1 to 4 digits after the decimal point. |
Display value at maximum analog input can be set arbitrarily (0.001~10,000) |
0~29% of maximum analog input (can be set arbitrarily) |
Input from terminal block 8-9 *For 4-wire sensor |
±100ppm/℃ (0~50℃) |
DC 0~10V Input resistance approximately 220kΩ |
DC 0~5V Input resistance approximately 220kΩ |
DC 1~5V Input resistance approximately 220kΩ |
DC 4~20mA Input resistance approximately 250Ω |
Selectable from reset, hold, prohibition, and display switching |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
39.1hrs
