High -frequency level level meter IP66 water drop OK drip -proof HT series
Tanji Corporation
About This Product
■ Features
･ AT series level meter drip -proof / high corrosion -resistant type
･ Low price realization (standard product)
･ Made of stainless steel with little rust
･ With a closed structure, it is hardly affected by rainwater from the outside air.
･ The measurement length can be changed to voluntary chief. (Up to 4000mm)
･ Measurement output can be selected for both linear and contact type.
･ Because the accuracy is relatively good, it is easy to apply and easy to automate.
･ Ideal for use in high humidity environment
･ Good corrosion resistance
■ Use
･ Various plants, cleaning machines, etc.
･ Where temperature and pressure are basically not added
･ Use in outdoor / mist environment
･ Where corrosion resistance is required
･ Use in the drug solution tank
■ Examples of use
･ Used for level management of various open tanks
･ Level management of rainwater pits in factories
■ Optional example
･ You can freely adjust the height using the mounting bracket
<< About the liquid level sensor >>>
■ Flexible response is possible
In order to meet the needs of various user (user specifications), it is possible to support flexible pipes, correspondence of the type and length of the pipe, correspondence of output (contact / linear), and correspondence of measurement positions.
■ Do not choose liquid
Most liquids can be measured. (Special solution will also be supported.) It is unlikely to be affected by wave, foam, and floating objects. (We will propose for all problems.)
■ Operation is prepared
Up and lower setting can be easily set, and stepless adjustments can be adjusted. An amplifier is built -in inside the head. (KT / AT / LTHT · UTB · STB)
■ Easy management
Power terminals can be used directly to the sequencer and Rire by connecting directly to the route. (Connection output type) Continuous analog output is possible. (1 ~ 5VDC output, 4 to 20mA output)
■ Easy maintenance
Easy maintenance because there is no movable part. It is small and lightweight, with excellent corrosion resistance. (SUS304 standard)
■ Easy mounting
It can be used even in the resin tank. Space saving without being affected by tank capacity. I do not choose the installation location.
-
Product
High -frequency level level meter IP66 water drop OK drip -proof HT series
-
Handling Company
Tanji Corporation
2 Models of High -frequency level level meter IP66 water drop OK drip -proof HT series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Control output (each open collector output) | Current consumption current | Dimensions (mm) | Long line | Material | Measurement range L | Measuring method | Mounting method | Operating temperature range | Operation humidity | Power-supply voltage | Protective structure | Save temperature range | mass |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Ht302 |
Available upon quote | 1 point output: upper limit or lower limit detection 2 point output: Up and lower limit detection 3 -point output: Up and lower+upper and lower (medium) detection | 50ma max | Head: φ70 × 80+ (electrode length) | Read line: 2.5m (standard) | Sensor Head: SUS304 Pipe part: SUS304 (standard), titanium / SUS316L (optional) electrodes: SUS304 Teflon -based insulating edge on the stick: Teflon. | Standard (200mm, 300mm, 500mm, 950mm) Optional production can be made voluntarily | Static capacity type | Separate fixed bracket required | -10-60 ° C (depending on the surrounding environment) | 35-85 % (without condensation) | 10-30VDC | IP66 compliant | -40-80 ° C | Approximately 1100g (L = 500mm) |
|
|
Ht401 |
Available upon quote | 4 -point output: Upon lower limit+up lower limit detection 5 -point output: Upon lower limit+upper lower limit+up lower limit (medium position) Detection linear output: 4-20 mA, DC1 ~ 5V * Linear output can be added to the entry output (DC1 to 5V only) | 150ma MAX | Head: φ70 × 80+ (electrode length) | Read line: 2.5m (standard) | Sensor Head: SUS304 Pipe part: SUS304 (standard), titanium / SUS316L (optional) electrodes: SUS304 Teflon -based insulating edge on the stick: Teflon. | Standard (200mm, 300mm, 500mm, 950mm) Optional production can be made voluntarily | Static capacity type | Separate fixed bracket required | -10-60 ° C (depending on the surrounding environment) | 35-85 % (without condensation) | 10-30VDC | IP66 compliant | -40-80 ° C | Approximately 1100g (L = 500mm) |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Tanji Corporation
View more products of Tanji Corporation
