High frequency liquid level level Type Removalable BTL series that can be managed in high temperature high -pressure environment
Tanji Corporation
About This Product
■ Features
･ Equipped with the features of the AT series.
･ Because the head and the amplifier part are separated, liquid surface management is possible in high -temperature and high -pressure environments.
We will make it according to the specifications of your request.
･ Fluid measurement temperature range is -20-200 ° C (please contact us)
･ Measurement under high pressure is possible. (From vacuum -1MPa. Please contact us anymore)
■ Use
･ Each boiler, various plant relationships
･ Points used under conditions such as high temperature and high pressure
■ Examples of use
･ Sealed tank and high temperature tank
■ Optional example
･ Flange, PT screws, and other special shapes can be installed.
･ There is also a method that does not use pipes.
(Please contact us)
･ Extreme low temperature ･ Extremely high -temperature electrodes can be produced.
<< About the liquid level sensor >>>
■ Flexible response is possible
In order to meet the needs of various user (user specifications), it is possible to support flexible pipes, correspondence of the type and length of the pipe, correspondence of output (contact / linear), and correspondence of measurement positions.
■ Do not choose liquid
Most liquids can be measured. (Special solution will also be supported.) It is unlikely to be affected by wave, foam, and floating objects. (We will propose for all problems.)
■ Operation is prepared
Up and lower setting can be easily set, and stepless adjustments can be adjusted. An amplifier is built -in inside the head. (KT / AT / LTHT · UTB · STB)
■ Easy management
Power terminals can be used directly to the sequencer and Rire by connecting directly to the route. (Connection output type) Continuous analog output is possible. (1 ~ 5VDC output, 4 to 20mA output)
■ Easy maintenance
Easy maintenance because there is no movable part. It is small and lightweight, with excellent corrosion resistance. (SUS304 standard)
■ Easy mounting
It can be used even in the resin tank. Space saving without being affected by tank capacity. I do not choose the installation location.
-
Product
High frequency liquid level level Type Removalable BTL series that can be managed in high temperature high -pressure environment
-
Handling Company
Tanji Corporation
-
Categories
2 Models of High frequency liquid level level Type Removalable BTL series that can be managed in high temperature high -pressure environment
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Control output (each open collector output) | Current consumption current | Dimensions (mm) | Long line | Material | Measurement range L | Measuring method | Operating temperature range | Operation humidity | Power-supply voltage | Save temperature range | mass |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
BTL204 |
Available upon quote | 1 point output: upper limit or lower limit detection 2 points output: Up and lower limit detection 3 -point output (medium): Detection of up and lower+vertical limit (medium) | 50ma max | Head part: Screw -in type φ62 × 77+electrode length flange type flange standard × 50+electrode length AMP part: Waterproof and dustproof BOX: 80 × 80 × 60 | Read line: 2.5m (standard) | Sensor head: SUS304 (standard) Head internal insulation: Teflon AMP Waterproof and dust Dust BOX: Aluminum Die Cast Pipe Department, Titanium / SUS316L (Optional) Electrical Division: SUS304 Teflon -based insulating edge: Teflon Owl: Bingon | Standard (200mm, 300mm, 500mm, 950mm) Optional production can be made voluntarily | Static capacity type | AMP part: -10-60 ° C (depending on the surrounding environment) Electrical portion: -20-200 ° C (inquiry required) | AMP part: 35-85 % (without condensation) | 10-30VDC | AMP part: -40 to 80 ° C | JIS10K flange type about 3500g (L = 500mm) |
|
|
BTL301 |
Available upon quote | 4 -point output: Upon lower limit+up lower limit detection 5 -point output: Upon lower limit+upper lower limit+up lower limit (medium position) Detection linear output: 4-20 mA, DC1 ~ 5V * Linear output can be added to the entry output (DC1 to 5V only) | 150ma MAX | Head part: Screw -in type φ62 × 77+electrode length flange type flange standard × 50+electrode length AMP part: Waterproof and dustproof BOX: 80 × 80 × 60 | Read line: 2.5m (standard) | Sensor head: SUS304 (standard) Head internal insulation: Teflon AMP Waterproof and dust Dust BOX: Aluminum Die Cast Pipe Department, Titanium / SUS316L (Optional) Electrical Division: SUS304 Teflon -based insulating edge: Teflon Owl: Bingon | Standard (200mm, 300mm, 500mm, 950mm) Optional production can be made voluntarily | Static capacity type | AMP part: -10-60 ° C (depending on the surrounding environment) Electrical portion: -20-200 ° C (inquiry required) | AMP part: 35-85 % (without condensation) | 10-30VDC | AMP part: -40 to 80 ° C | JIS10K flange type about 3500g (L = 500mm) |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Tanji Corporation
View more products of Tanji Corporation
