All Categories

History

  1. Metoree
  2. Polymeric Materials
  3. FRP Sheets
  4. Laminated resin for carbon infusion (Temuco Fine Co., Ltd.)
Laminated resin for carbon infusion-NM-300A
Laminated resin for carbon infusion-Temuco Fine Co., Ltd.

Laminated resin for carbon infusion
Temuco Fine Co., Ltd.

About This Product

■Product features

・Can be cured at room temperature (secondary curing is required if heat resistance is required) ・Low viscosity ・Long pot life ・IPDA (isophorone diamine) free

■Preliminary defoaming

・Main ingredient: After preheating at room temperature to 60℃, heat until bubbles begin to form intermittently. ・Curing agent: Cure at room temperature until bubbles appear intermittently.

■Measuring and mixing

Mixing ratio of main agent and curing agent: main agent/curing agent = 100/33 (weight ratio) - Accurately measure the required amount of base agent and hardening agent, mix and stir. ・Please use non-corrosive mixing vessels and stirring spatulas. Use a spatula-shaped object to stir, and do not use stick-shaped objects as they tend to cause poor mixing.Also, it is difficult to mix around the edges of the container, so be careful not to rub the edges of the container with a spatula and cause poor mixing. please do

■Defoaming after mixing

・Please defoam even after mixing the base agent and curing agent. Continue defoaming until air bubbles are generated intermittently. If degassing takes time, increase the temperature of the resin to 40°C to 60°C. ・The pot life will be shortened if the amount of resin is large. Also, please note that the pot life will change depending on the resin temperature. ・After mixing the base agent and curing agent, please do the work in a short time.

■How to use

Injection → curing → demolding → cleaning of containers and tools

■Storage of leftovers (after opening)

・After opening, thoroughly wipe the opening of the container for both the base agent and hardener, and then seal the container tightly. ・Please store in a cool, dark place with low humidity and use it up as soon as possible.

■Safety and health

- May cause skin irritation. Please be careful when handling ・If resin gets on your skin, immediately wash it with soapy water, etc. ・If you have a rash or pain, please consult a doctor immediately. ・Install a local exhaust system in the work area and ensure adequate ventilation.

■Storage before use (opening)

・The main agent can be used for 12 months if unopened and stored in a cool, dark place, and the hardening agent can be used for 6 months if unopened and stored in a cool, dark place. ・Please be sure to check the condition before use, and do not use if it has deteriorated.

■Disposal method

Please entrust the disposal to a licensed industrial waste disposal company.It is extremely dangerous to unnecessarily harden or incinerate it.

  • Product

    Laminated resin for carbon infusion

Share this product


80+ people viewing

Last viewed: 10 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Laminated resin for carbon infusion

Image Part Number Price (excluding tax) Mixing ratio Weight (%) Mixing ratio Mass (%) Impact strength (kJ/m2) Load deflection temperature (℃) Viscosity (mPa・s) Hardness Hardening agent Mixed viscosity (mPa・s) Specific gravity Maximum exothermic temperature (℃) Flexural modulus (MPa) Bending strength (MPa) Exterior Pot life (min) Main agent Gel time (min)
Laminated resin for carbon infusion-Part Number-NM-300A

NM-300A

Available upon quote

100:33

100:40

11

74

750

83

Modified alicyclic polyamine

240

1.16

234

2,430

100

Pale yellow liquid

111

Liquid epoxy resin

220

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Narrow chopped strand mat-FRP Kaji Co., Ltd.

Narrow chopped strand mat

FRP Kaji Co., Ltd.

110+ people viewing

FRP Sheets

3 models listed

Glass cloth/mat thin plate-FRP Kaji Co., Ltd.

Glass cloth/mat thin plate

FRP Kaji Co., Ltd.

130+ people viewing

Last viewed: 9 hours ago

FRP Sheets

3 models listed

Laminated resin for hand layup for carbon-Temuco Fine Co., Ltd.

Laminated resin for hand layup for carbon

Temuco Fine Co., Ltd.

100+ people viewing

FRP Sheets

4 models listed

UV curing sheet Sunsheet-Nakajima Koki Co., Ltd.

UV curing sheet Sunsheet

Nakajima Koki Co., Ltd.

70+ people viewing

Last viewed: 17 hours ago

Response time: 46.78 hours

FRP Sheets
Social capital materials/Infrastructure repair/reinforcement (materials/methods) Strand sheet-Nippon Steel Chemical & Materials Co., Ltd.

Social capital materials/Infrastructure repair/reinforcement (materials/methods) Strand sheet

Nippon Steel Chemical & Materials Co., Ltd.

70+ people viewing

Last viewed: 5 hours ago

FRP Sheets

2 models listed

Bluenet VX-Tokyo Fukuko Co., Ltd.

Bluenet VX

Tokyo Fukuko Co., Ltd.

50+ people viewing

FRP Sheets

2 models listed

See More FRP Sheets Products

Other products of Temuco Fine Co., Ltd.

Reviews shown here are reviews of companies.

Laminated resin for hand layup for carbon-Temuco Fine Co., Ltd.

Laminated resin for hand layup for carbon

Temuco Fine Co., Ltd.

100+ people viewing

FRP Sheets

4 models listed

Industrial repair agent HL-HRS-Temuco Fine Co., Ltd.

Industrial repair agent HL-HRS

Temuco Fine Co., Ltd.

60+ people viewing

Last viewed: 31 minutes ago

Crack Sealer
Industrial repair agent Tough rubber putty-Temuco Fine Co., Ltd.

Industrial repair agent Tough rubber putty

Temuco Fine Co., Ltd.

80+ people viewing

Crack Sealer

2 models listed

Hobby resin Highly transparent non-yellowing type epoxy resin Pro Crystal Neo-Temuco Fine Co., Ltd.

Hobby resin Highly transparent non-yellowing type epoxy resin Pro Crystal Neo

Temuco Fine Co., Ltd.

80+ people viewing

Epoxy Resin Paints
Hobby Resin Two-component Highly Transparent Silicone SM-2106-Temuco Fine Co., Ltd.

Hobby Resin Two-component Highly Transparent Silicone SM-2106

Temuco Fine Co., Ltd.

90+ people viewing

Last viewed: 23 hours ago

Silicone Resins
Hobby Resin Siloprene RTV-2K 1406-Temuco Fine Co., Ltd.

Hobby Resin Siloprene RTV-2K 1406

Temuco Fine Co., Ltd.

90+ people viewing

Last viewed: 4 hours ago

Silicone Resins
Hobby Resin Procrystal 880C Retardant-Temuco Fine Co., Ltd.

Hobby Resin Procrystal 880C Retardant

Temuco Fine Co., Ltd.

80+ people viewing

Cure Accelerators

View more products of Temuco Fine Co., Ltd.

About Company Handling This Product

Temuco Fine Co., Ltd.

  • Japan

Related search keywords

FRP Sheets
FRP Sheets　Temuco Fine Co., Ltd.
Temuco Fine Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree