All Categories

History

Process measurement equipment Online TOC/TP/TN meter Bio Tector B7000-B7000
Process measurement equipment Online TOC/TP/TN meter Bio Tector B7000-Nittoseiko Analytech Co., Ltd

Process measurement equipment Online TOC/TP/TN meter Bio Tector B7000
Nittoseiko Analytech Co., Ltd

Nittoseiko Analytech Co., Ltd's Response Status

Response Rate

100.0%

Response Time

64.4hours


About This Product

Unlike conventional oxidation methods, the two-step wet oxidation method does not require any pretreatment such as dilution, filtration, or salt removal. And you don't have to worry about clogging of the sample line or corrosion of internal parts. The two-step wet oxidation method uses a very strong oxidizing agent called ``hydroxyl radical'' that is unaffected by the salt content of the sample. Features

■TOC high concentration measurement

No dilution required up to 100,000ppm. Measures solid particles up to φ2mm without a filter. The automatic range switching function follows fluctuations in sample concentration and enables stable continuous measurement of multiple channels (up to 6 channels) with different concentrations.

■A wide variety of equipment configurations

TN (total nitrogen) / TP (total phosphorus) measurement is also supported as an option, but only measurement is required for TN because the reaction process is completed when TOC measurement is completed. TP requires approximately 8 minutes of additional processing and measurement time, but during that time the next TOC measurement is performed in parallel, so all TOC/TN/TP measurements can be performed at approximately 10 minute intervals.

■Maintenance free

It is compatible with environments containing high salt concentrations and large amounts of calcium, and because it automatically performs self-cleaning after each measurement, it prevents the formation of bacteria and the adhesion of highly viscous oils and fats, making it maintenance-free. Regular maintenance: Reagent replenishment once/month, calibration and periodic replacement parts once/six months

■Self-cleaning function

After analysis, the sample decomposition solution is stored in a storage tank while maintaining an acidic pH of around 2. Before the next measurement, the stored sample digestion solution is pumped back through the internal flow path and sample tube as a cleaning solution to perform self-cleaning. This decomposes and sterilizes oils, fats, bacteria, etc. that adhere to the sample tube, and keeps the sample flow path clean at all times.

  • Product

    Process measurement equipment Online TOC/TP/TN meter Bio Tector B7000

Share this product


130+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Process measurement equipment Online TOC/TP/TN meter Bio Tector B7000

Image Part Number Price (excluding tax) Power supply voltage/power consumption TP Power supply voltage/power consumption TOC Power supply voltage/power consumption TN Measurement items Measurement channel TP Measurement channel TOC Measurement channel TN Measurement principle TP Measurement principle TOC Measuring principle TN Measuring range TP Measuring range TOC Measuring range TN Detection method TP Detection method TOC Detection method TN Dimensions/mass TP Dimensions/mass TOC Dimensions/mass TN Sample water volume TP Sample water volume TOC Sample water volume TN
Process measurement equipment Online TOC/TP/TN meter Bio Tector B7000-Part Number-B7000

B7000

Available upon quote

AC 115 V (60 Hz) –AC 230 V (50 Hz) /max 300 W Measurement terms

AC 115 V (60 Hz) –AC 230 V (50 Hz) /max 300 W Measurement terms

AC 115 V (60 Hz) –AC 230 V (50 Hz) /max 300 W

TOC (VOC, COD, BOD), TP, TN

Up to 3 channels (optional) Measurement items

Up to 6 channels (optional) Measurement items

Up to 6 channels (optional)

Wet two-stage oxidation method + heating/hydrolysis Measurement items

Wet two-stage oxidation method (hydroxyl radical) measurement items

Wet two-stage oxidation method (hydroxyl radical)

Maximum: 0-4,250mg/L~1,440-42,500mg/L
Minimum: 0-11mg/L~7-108mg/L Measurement items

Max: 0-100,000mg/L
Minimum: 0-0.5mg/L~0-5mg/L Measurement item

Maximum: 0-6,750mg/L~480-20,000mg/L
Minimum: 0-19mg/L~2-55mg/L

Absorption photometry (485 nm ultraviolet light) Measurement items

NDIR method measurement items

Absorption photometry (217 nm ultraviolet light)

Approximately 1,250 (1,500,1,750) (H) ×750 (W) ×320 (D) mm Approximately 90~120kg Measurement items

Approximately 1,250 (1,500,1,750) (H) ×750 (W) ×320 (D) mm Approximately 90kg Measurement item

Approx. 1,250 (1,500,1,750) (H) ×750 (W) ×320 (D) mm Approx. 90~120kg

0.02~10ml measurement item

0.02~10ml measurement item

0.02~10ml

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Water Quality Measuring Instruments Products

Other products of Nittoseiko Analytech Co., Ltd

Reviews shown here are reviews of companies.


View more products of Nittoseiko Analytech Co., Ltd

About Company Handling This Product

Response Rate

100.0%


Response Time

64.4hrs

Company Overview

Nittoseiko Analytech Co., Ltd, founded in April 1979 and based in Yamato, Kanagawa, is a manufacturer and supp...

See More

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree