All Categories
History
Price (excluding tax)
■ Overview "Serama cast 675N" is a fine powder of aluminum nitride, which is highly thermal conductivity, as a ceramic powder for filling, increases the heat from high -pressure resistors, increases the heat output of cartridge heaters, and is a temperature sensor. It is used to improve the reaction time. ■ Characteristics "Serama Cast 675N" is a ceramic filler mainly based on fine powder of aluminum nitride, which is ideal for improving the thermal conductivity of electrical equipment used at high temperatures. Examples of use include a cartridge heater, a high -pressure resistor, a thermo couple, and a resistance temperature inspection. Good chemical resistance and moisture resistance. ■ How to use The "Serama cast 675N" is mixed with 16 to 18 ratio of powder at a weight ratio of 100. You can easily inject it by using a dispenser. After the injection, the processing material is horizontally dried at room temperature for more than 8 hours, then fired at 93 ° C for 2 to 4 hours at 121 ° C for 3 hours at 121 ° C. The pores after burning is less than 3%. Using a dedicated binder HLB-1 instead of water increases moisture resistance. In this case, bake for 30 to 60 minutes at 232 ° C for more than 232 ° C.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Compression intensity (PSI)
Heat resistance upper limit (℃)
Insulation power (VOLTS/MIL)
capacity
Part Number
Serama cast 675NHandling Company
Edec Co., Ltd.Categories
Image | Price (excluding tax) | Compression intensity (PSI) | Heat resistance upper limit (℃) | Insulation power (VOLTS/MIL) | capacity |
---|---|---|---|---|---|
![]() |
Available upon quote | 2,000 | 1,200 | 300 | 1 Pint (≒ 500ml), 1 quote (≒ 1L) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.