All Categories
History
Price (excluding tax)
Response Rate
100.0%
Response Time
24.9hours
Relatively Fast Response
■ Overview Highly viscous water -soluble emulsion type of non -ionic surfactant is a strong water -soluble degreasing / cleaner. Vegetable oils that cannot be removed by solvents are completely melted and washed. It is economical because it is diluted. ■ Characteristic ・ The degreasing power is like a trichrol ethylene. ・ Vegetable oils that cannot be removed by solvent can also be washed. ・ Since the solvent is not included, it is harmless, so special equipment such as ventilation equipment is unnecessary. The degreasing cost is cheap because it is used with water. ・ Rubber, plastic, and paint parts can be washed. ·Incombustibility. Odorless. ■ How to use ・ Add water 4 to Ace Liquid 1 to make a degreasing solution. Ace Liquid is stored, so emulsion may be separated, so please shake the whole container before use to make the emulsion uniform. ・ Immersed metal parts to be degreased for 5 to 10 minutes. Use a metal basket for small parts. ・ Rinse well with water. Washing is very important. If possible, use running water. ・ When the washing is finished, enter the black dyeing process as it is. ・ If the parts cannot be immersed, spray the ace liquid with water or brush while rubbed while rubbing with a brush, sponge, or cloth, and wipe it with water or water with water. ・ When using it in cold places such as outdoors, please use hot water to raise the temperature. When heated, the degreasing power improves, but when it is 58 ° C or higher, the ingredients are broken down. ・ Because it has a strong degreasing power, if you are working in a long time during the work, you will have a hand, so please wear rubber gloves or remind you of the cream. ■ Treatment of waste liquid Waste solution containing oil after degreasing should be treated by the method of treating the factory emission oil. When the waste liquid is heated to 70 ° C or higher, the oil and oils are separated and float above. Ace likid itself is weak alkaline, so neutralize it with acid and pour it.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
PH
capacity
component
exterior
flash point
specific gravity
Biological oxygen requirements (BOD) (PPM)
Calculation point (℃)
Chemical oxygen requirements (COD) (PPM)
Decomposition temperature (℃)
Floating material amount (SS) (MG/L)
N-Hexan extract content (PPM)
Vehicle (CPS, 20 ℃)
Part Number
Ace kidHandling Company
Edec Co., Ltd.Categories
| Image | Price (excluding tax) | Biological oxygen requirements (BOD) (PPM) | Calculation point (℃) | Chemical oxygen requirements (COD) (PPM) | Decomposition temperature (℃) | Floating material amount (SS) (MG/L) | N-Hexan extract content (PPM) | PH | Vehicle (CPS, 20 ℃) | capacity | exterior | specific gravity |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | 100 ~ 150 | -2 | 80 ~ 90 | 58 ~ 60 | 150 ~ 160 | 12-14 | 9.0 ~ 9.4 | 400 ~ 600 | 18L | Milky white emulsion | 1.035 ~ 1.045 |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
24.9hrs
