Aremkobond 525 | Conductive, heat -resistant, high -heat conductivity conductive or thermal conductivity adhesive
Edec Co., Ltd.
Price (excluding tax)
Model Description
■ Overview "Alem Cobond 525" is an epoxy -based conductive heat -resistant adhesive filled with silver particles. It is used to assemble electronic components that require conductivity and adhesive power. ■ How to use Introduction or coating the surface of glue or coating with a shot blast or sandpaper, and completely remove dust, oil, shot blast, and sandpaper residue with a cleaning agent. Next, apply thinly on both sides of the wearing body and past it. When the bodily paste is completed, bake at 149 ° C for 2 hours or 121 ° C for 6 hours to harden. ■ Application example ・ Repair of printed circuit boards ・ Sensor used in vacuum ・ High temperature connector and special light source ・ IC chips, semiconductor parts, etc.
Model Filter
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Electric resistance rate (ω • cm)
Filler
Heat expansion coefficient (cm/cm/℃ x 10^-6)
Heat resistance upper limit (℃)
Rust resistance
Thermal conductivity (W/m • K)
capacity
color
Component number of components
Density (G/CM^3)
Escape force (kgf/cm^2)
In -furnace -grilled heating firing
Mixed viscosity @25 ℃ (CP)
Pulling slick intensity (PSI)
Mixed volume ratio (main agent: curing agent)
Pot life (100g amount 25 ° C time)
Insulation (KV/mm)
Dedicated intensity (PSI)
Indirect dielectric
-
Part Number
Aremkobond 525
-
Product
Conductive, heat -resistant, high -heat conductivity conductive or thermal conductivity adhesive
-
Handling Company
Edec Co., Ltd.
Conductive, heat -resistant, high -heat conductivity conductive or thermal conductivity adhesive Aremkobond 525's performance table
Items marked with have different values depending on the model number.
| Product Image | Price (excluding tax) | Component number of components | Density (G/CM^3) | Electric resistance rate (ω • cm) | Escape force (kgf/cm^2) | Filler | Heat expansion coefficient (cm/cm/℃ x 10^-6) | Heat resistance upper limit (℃) | In -furnace -grilled heating firing | Mixed viscosity @25 ℃ (CP) | Pulling slick intensity (PSI) | Rust resistance | Thermal conductivity (W/m • K) | capacity | color |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | 1 | 1.85 | 0.01 | 175.8 | Silver | 52.2 | 171 | 121 ℃ x 6HRS. Or 149 ℃ x 2HRS. | paste | 2,500 | excellence | 1.9 | 25g, 50g | Silver |
There are 7 models for this product.
Customers who viewed this product also viewed
Other products of Edec Co., Ltd.
View more products of Edec Co., Ltd.
About Company Handling This Product
- Japan
- Since 1973
- 14 employees