All Categories
History
Price (excluding tax)
Response Rate
100.0%
Response Time
24.9hours
Relatively Fast Response
■ Overview From metal that is easy to respond in molten state, such as uranium, bellillium, titanium, etc., protects graphite, ceramics, and metal, prevents lubrication at ultra -high temperature, prevention of melt metal, metal steam prevention, and separate type (Y2O3). It is a coating agent. The heat resistance limit is 2,000 ° C (1,400 ° C if coated with graphite), but the atmosphere used for the Itoria coat is only vacuum and inert atmosphere, and cannot be used in an oxidation atmosphere. ■ Characteristics ・ It is not returned by hydrogen and carbon. (In magnesium, it is gradually returned) ・ Electricity and heat are extremely low conductivity. ・ It is stable for the easiest metal, such as ulanium, beryllium, titanium, and alloys. ・ It is chemically stable. ■ Use ・ To prevent the adhesion of equipment, parts in the vacuum furnace, parts, molten metal, and metal vapor. ・ To prevent reaction with the molten metal of the graphite pub used in the vacuum furnace. ・ For lubrication and separation below ultra -high temperature. ■ How to use ・ Remove the oil and garbage on the coating surface completely. -Toria coat is sediment on the bottom, so mix it well and make it uniform, then apply or spray ( * 1) or thinly ( * 1). When using a spray, use it with 50 to 100 mesh to prevent clogging before using it. Do not neglect the undiluted solution. ・ Thin (0.05 ~ 0.08mm) Apply twice. Apply the first time and dry in 30 minutes to 1 hour, so please apply it thinly on it. After 30 minutes to 1 hour, the film will be completed. Usually no firing is required. ・ If it is necessary to completely release gas such as a vacuum furnace, put it in a vacuum or inactive atmosphere furnace ( * 2), slowly heat up, and finally heat it at 600 ° C for 2 hours. It will be completely released. ・ After the coating is over, wash the brush used. * 1: If the film is thickened, it may cause it. * 2: When heated in an oxidized atmosphere, the binder burns, so the film becomes softer and white ink.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
PH
Processing area
Upper limit of heat resistance
Viscosity (CP)
capacity
color
Binder used
Effective storage period
Purification (%)
Release gas
solvent
Part Number
Itoria coatHandling Company
Edec Co., Ltd.Categories
| Image | Price (excluding tax) | Binder used | Effective storage period | PH | Processing area | Purification (%) | Release gas | Upper limit of heat resistance | capacity | color | solvent |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | cellulose | One year | 11 | 2 ~ 5m^2 per 1L | 99.99 | H2O, Co, CO2 | 2,000 ° C (used for graphite is 1,400 ° C) | 100ml, 500ml, 1L, both wide plastic containers | White | water |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
24.9hrs
