Price (excluding tax)
Estimate Required
Model Description
Entry model with excellent cost performance
A 100W hee sufficient for use for business use despite its low price
Equipped with a tar, excellent cost performance.
Le. Equipped with the only hand at hand on/off switch.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Body weight
250g
230g | Small excuse hot Melt gun TEC305
230g | Small excuse hot Melt gun TEC305LT
480g | Medium -deductible hot Melt gun HD200 II
450g | Medium-deducted hot melt gun TEC806-12
500g | Medium-derived hot Melt gun TEC810-12
500g | Medium-excerpt hot Melt gun TEC810-12LT
500g | Large-discharge hot melt gun TEC810-15
520g | Large-discharge hot melt gun HB-350
950g | Large amount of discharge hot melt gun HK-615
530g / 630g (when adapter is installed) | Cordless Hot Meltgan B-TEC808
380g / 480g (when adapter is installed) | Cordless Hot Meltgan B-TEC308
1300g | Electric hot melt gun TE-M12
1300g | Electric hot Melt gun TE-M15
1300g | Air type hot melt gun TEC6100
1400g | Hot Melt Spray Gun TEC6300
1200g | Hot Melt Spray Gun TR60LCD
850g | Tank type hot melt gun MS80
1220g | Tank -type hot Melt gun MS200LCD
1080g | Moisturizing (PUR) hot Melt gun PUR-MAXX
1100g | Moisturizing (PUR) hot Melt gun TR700
1400g | Moisturizing (PUR) hot Melt gun TR80LCD
14.8kg | Desktop type application HS-0753
11kg | Desktop type application VSB40
34kg | Industrial application D-4E
470g | Grewt Dot Shot Pro
Cable (stand -body)
(Stand -body)
4.5m | Hot Melt Spray Gun TR60LCD
(Stand -body) 4.5m | Moisturizing (PUR) hot Melt gun TR700
(Stand -body) 4.5m | Moisturizing (PUR) hot Melt gun TR80LCD
Corresponding adhesive
Superstick (φ11.6mm)
Superstick (φ11.6mm) | Small excuse hot Melt gun TEC305
Superstick (φ11.6mm) | Small excuse hot Melt gun TEC305LT
Superstick (φ11.6mm) | Medium -deductible hot Melt gun HD200 II
Superstick (φ11.6mm) | Medium-deducted hot melt gun TEC806-12
Superstick (φ11.6mm) | Medium-derived hot Melt gun TEC810-12
Superstick (φ11.6mm) | Medium-excerpt hot Melt gun TEC810-12LT
Mighty Stick (φ14.3mm) | Large-discharge hot melt gun TEC810-15
Superstick (φ11.6mm) | Large-discharge hot melt gun HB-350
Mighty Stick (φ14.3mm) | Large amount of discharge hot melt gun HK-615
Superstick (φ11.6mm) | Cordless Hot Meltgan B-TEC808
Superstick (φ11.6mm) | Cordless Hot Meltgan B-TEC308
Superstick (φ11.6mm) | Electric hot melt gun TE-M12
Mighty Stick (φ14.3mm) | Electric hot Melt gun TE-M15
Slug | Air type hot melt gun TEC6100
Slug | Hot Melt Spray Gun TEC6300
Pillow / Pellet / Slag | Hot Melt Spray Gun TR60LCD
Pillow / Pellet / Slag | Tank type hot melt gun MS80
Pillow / Pellet / Slag | Tank -type hot Melt gun MS200LCD
PUR cartridge | Moisturizing (PUR) hot Melt gun PUR-MAXX
Dissolve discharge ability
800g/h
900g/h | Small excuse hot Melt gun TEC305
900g/h | Small excuse hot Melt gun TEC305LT
1500g/h | Medium -deductible hot Melt gun HD200 II
1800g/h | Medium-deducted hot melt gun TEC806-12
2000g/h | Medium-derived hot Melt gun TEC810-12
2000g/h | Medium-excerpt hot Melt gun TEC810-12LT
2000g/h | Large-discharge hot melt gun TEC810-15
1500g/h | Large-discharge hot melt gun HB-350
2500g/h | Large amount of discharge hot melt gun HK-615
1800g/h | Cordless Hot Meltgan B-TEC808
550g/h | Cordless Hot Meltgan B-TEC308
2500g/h | Electric hot melt gun TE-M12
3800g/h | Electric hot Melt gun TE-M15
4100g/h | Air type hot melt gun TEC6100
4200g/h | Hot Melt Spray Gun TEC6300
250g/min | Hot Melt Spray Gun TR60LCD
1.2kg/h | Tank type hot melt gun MS80
2.5kg/h | Tank -type hot Melt gun MS200LCD
300g/h | Moisturizing (PUR) hot Melt gun PUR-MAXX
250g/min | Moisturizing (PUR) hot Melt gun TR700
250g/min | Moisturizing (PUR) hot Melt gun TR80LCD
2.5kg/h | Desktop type application HS-0753
5 to 5.5kg/h | Industrial application D-4E
Used power supply
AC100-240V
AC100-240V | Small excuse hot Melt gun TEC305
AC100-240V | Small excuse hot Melt gun TEC305LT
AC100-220V | Medium -deductible hot Melt gun HD200 II
AC100-240V | Medium-deducted hot melt gun TEC806-12
AC100V | Medium-derived hot Melt gun TEC810-12
AC100V | Medium-excerpt hot Melt gun TEC810-12LT
AC100V | Large-discharge hot melt gun TEC810-15
AC100V | Large-discharge hot melt gun HB-350
AC100V | Large amount of discharge hot melt gun HK-615
AC100V | Cordless Hot Meltgan B-TEC808
AC100V | Cordless Hot Meltgan B-TEC308
AC100V | Electric hot melt gun TE-M12
AC100V | Electric hot Melt gun TE-M15
AC100V | Air type hot melt gun TEC6100
AC100V | Hot Melt Spray Gun TEC6300
AC100V | Hot Melt Spray Gun TR60LCD
AC100V | Tank type hot melt gun MS80
AC100V | Tank -type hot Melt gun MS200LCD
AC100V | Moisturizing (PUR) hot Melt gun PUR-MAXX
AC100V | Moisturizing (PUR) hot Melt gun TR700
AC100V | Moisturizing (PUR) hot Melt gun TR80LCD
AC100V | Desktop type application HS-0753
AC100V | Desktop type application VSB40
AC100V/200V | Industrial application D-4E
heater
100W / 193 ℃
PTC heater / 150W / 195 ℃ | Small excuse hot Melt gun TEC305
PTC heater / 150W / 130 ° C | Small excuse hot Melt gun TEC305LT
PTC heater / 200W / 204 ℃ | Medium -deductible hot Melt gun HD200 II
PTC heater / 250W / 215 ℃ | Medium-deducted hot melt gun TEC806-12
Cartridge heater
250W / 130, 160, 195, 215 ℃ | Medium-derived hot Melt gun TEC810-12
Cartridge heater
250W / 150 ℃ | Medium-excerpt hot Melt gun TEC810-12LT
Cartridge heater / 300W /
130, 160, 195, 215 ° C | Large-discharge hot melt gun TEC810-15
Cartridge heater / 330W /
130, 150, 170, 190, 210.230 ° C | Large-discharge hot melt gun HB-350
Cartridge heater / 600W / 220 ° C | Large amount of discharge hot melt gun HK-615
PTC heater / 250W / 165, 195 ℃ | Cordless Hot Meltgan B-TEC808
PTC heater / 150W / 165, 195 ℃ | Cordless Hot Meltgan B-TEC308
Cartridge heater
450W / 195 ℃ | Electric hot melt gun TE-M12
Cartridge heater
500W / 195 ℃ | Electric hot Melt gun TE-M15
Cartridge heater
250W x 2 = 500W
195 ° C (sold separately 215 ° C thermostat)
Used air pressure 3.5-7kg/㎠ | Air type hot melt gun TEC6100
Cartridge heater
250W x 2 = 500W
180 ° C (sold separately 215 ° C thermostat)
Used air pressure 3.5-7kg/㎠ | Hot Melt Spray Gun TEC6300
Cartridge heater / 400W /
Setable temperature range: 50-210 ° C | Hot Melt Spray Gun TR60LCD
Cartridge heater / 200W /
Setable temperature range: 20-200 ° C | Tank type hot melt gun MS80
Cartridge heater / 500W /
Setable temperature range: 20-200 ° C | Tank -type hot Melt gun MS200LCD
Cartridge heater / 120W / 120 ° C | Moisturizing (PUR) hot Melt gun PUR-MAXX
Cartridge heater / 400W /
120 ℃ / | Moisturizing (PUR) hot Melt gun TR700
Cartridge heater / 400W /
50-210 ° C (variable) | Moisturizing (PUR) hot Melt gun TR80LCD
Power cord
4m | Hot Melt Spray Gun TR60LCD
4m | Moisturizing (PUR) hot Melt gun TR700
4m | Moisturizing (PUR) hot Melt gun TR80LCD
Used air pressure
3.5-6.3kg/㎠ | Hot Melt Spray Gun TR60LCD
3.5-6.3kg/㎠ | Moisturizing (PUR) hot Melt gun TR700
3.5-6.3kg/㎠ | Moisturizing (PUR) hot Melt gun TR80LCD
~ 6kg/㎠ | Desktop type application HS-0753
tank capacity
250㎖ | Hot Melt Spray Gun TR60LCD
150㎖ | Tank type hot melt gun MS80
250㎖ | Tank -type hot Melt gun MS200LCD
1ℓ (entrance 10㎝) | Desktop type application HS-0753
4ℓ | Desktop type application VSB40
4ℓ | Industrial application D-4E
Heater capacity
1100W | Desktop type application HS-0753
800W | Desktop type application VSB40
Setting temperature range
100-200 ° C | Desktop type application HS-0753
20-150 ° C
(Optional specification is 180 ° C) | Desktop type application VSB40
30-230 ° C | Industrial application D-4E
TB-EM18WD-H1147-EX
HF reading/writing head
For explosion -proof areas or extreme requirements (food industry, etc.)
Cylinder type, M18x1
Stainless steel, 1.4404 (SUS316L)
LCD polymer front cap
High protection grade: IP69K
Special double lip sealing
Enhanced resistance to acidic and alkaline cleaning agents
For the food industry
Laser engraved with very little laser
Power supply and operation can only be made when connecting to Blident interface
Connect only by M12 × 1 connector, Blident extension cable
ATEX, Category II3G, EX Zone 2
ATEX, Category II3D, EX Zone 22 | Desktop type application HS-0753
TB-EM18WD-H1147-EX/C53
HF reading/writing head
For explosion-proof areas or extremely requirements (food industry, etc.) and for bath line porridge using TBEN-*
Cylinder type, M18x1
Stainless steel, 1.4404 (SUS316L)
LCD polymer front cap
High protection grade: IP69K
Special double lip sealing
Enhanced resistance to acidic and alkaline cleaning agents
For the food industry
Laser engraved with very little laser
No terminal resistance (separate end resistance is required)
This device can be operated only by connecting to tben-s*-2rfid-*or tben-l*-4rfid-*.
Up to 32 node/line or connection
Supported terminal resistance is required (see accessories)
In particular, please follow the performance of the power supply equipment and the maximum current capacity of the cable when turning the power.
Please make sure that the voltage drop on the line is within the regulations
Sparrine: Up to 2m
Maximum bus length: 50m
By default, the commands can only be processed by one read/write head, so HF bus mode is suitable for sta | Desktop type application HS-0753
size
W400 x D420 x H500mm | Desktop type application HS-0753
W290 (including handle) x D255 x H320mm | Desktop type application VSB40
W312 × D607 × H424mm | Industrial application D-4E
Discharge method
Manual piston pump | Desktop type application VSB40
TB-EM30WD-H1147-EX
HF reading/writing head
For explosion -proof areas or extreme requirements (food industry, etc.)
M30 × 1.5, cylindrical type
Stainless steel, 1.4404
LCD polymer front cap
High protection grade: IP69K
Special double lip sealing
Protection against general acidic and alkaline cleaning agents
Compatible with the use of the food industry
Laser engraved with very little laser
Power supply and operation can only be made when connecting to Blident interface
Connect only by M12 × 1 connector, Blident extension cable
ATEX, Category II3G, EX Zone 2
ATEX, Category II3D, EX Zone 22 | Desktop type application VSB40
TB-EM30WD-H1147-EX/C53
HF reading/writing head
For explosion-proof areas or extremely requirements (food industry, etc.) and for bath line porridge using TBEN-*
M30 × 1.5, cylindrical type
Stainless steel, 1.4404
LCD polymer front cap
High protection grade: IP69K
Special double lip sealing
Protection against general acidic and alkaline cleaning agents
Compatible with the use of the food industry
Laser engraved with very little laser
No terminal resistance (separate end resistance is required)
This device can be operated only by connecting to tben-s*-2rfid-*or tben-l*-4rfid-*.
Up to 32 node/line or connection
Supported terminal resistance is required (see accessories)
In particular, please follow the performance of the power supply equipment and the maximum current capacity of the cable when turning the power.
Please make sure that the voltage drop on the line is within the regulations
Sparrine: Up to 2m
Maximum bus length: 50m
By default, the commands can only be processed by one read/write head, so HF bus | Desktop type application VSB40
TB-M18-H1147
HF reading/writing head
Cylinder type, M18 × 1
Brass, chrome plating
Connect to RFID interface
M12 × 1 male connected by RFID cable | Industrial application D-4E
TB-M18-H1147/C53
HF reading/writing head
For bass line pology using tben-*
Cylinder type, M18 × 1
Brass, chrome plating
No terminal resistance (separate end resistance is required)
This device can be operated only by connecting to tben-s*-2rfid-*or tben-l*-4rfid-*.
Up to 32 node/line or connection
Supported terminal resistance is required (see accessories)
In particular, please follow the performance of the power supply equipment and the maximum current capacity of the cable when turning the power.
Please make sure that the voltage drop on the line is within the regulations
Sparrine: Up to 2m
Maximum bus length: 50m
By default, the commands can only be processed by one read/write head, so HF bus mode is suitable for static applications and low -speed dynamic applications.
In the continuous HF bus mode, the command is executed simultaneously with all reading/writing heads in the bust pology. The recorded data is saved in the ring buffer of the module
The address is automatically assigned to the read/wr | Industrial application D-4E
TB-M30-H1147
HF reading/writing head
Cylinder type, M30 × 1.5
Brass, chrome plating
Power supply and operation can only be made when connecting to Blident interface
Connect only by M12 × 1 connector, Blident extension cable | Grewt Dot Shot Pro
TB-M30-H1147/C53
HF reading/writing head
For bass line pology using tben-*
Cylinder type, M30 × 1.5
Brass, chrome plating
No terminal resistance (separate end resistance is required)
This device can be operated only by connecting to tben-s*-2rfid-*or tben-l*-4rfid-*.
Up to 32 node/line or connection
Supported terminal resistance is required (see accessories)
In particular, please follow the performance of the power supply equipment and the maximum current capacity of the cable when turning the power.
Please make sure that the voltage drop on the line is within the regulations
Sparrine: Up to 2m
Maximum bus length: 50m
By default, the commands can only be processed by one read/write head, so HF bus mode is suitable for static applications and low -speed dynamic applications.
In the continuous HF bus mode, the command is executed simultaneously with all reading/writing heads in the bust pology. The recorded data is saved in the ring buffer of the module
The address is automatically assigned to the read/ | Grewt Dot Shot Pro
Appearance
Transparent | PR200
Transparent | EEC2
Evror coefficient (butyl acetate = 1)
0.21 | PR200
<1 | EEC2
Flash point PMCC
> 51 ℃ | PR200
> 97.7 ℃ | EEC2
Insulated strength
55,000v | PR200
Solution of water
About 5% | PR200
1 | EEC2
Specific gravity (1 5 ゜ c)
0.85 | PR200
1.06 | EEC2
Steam density (air = 1)
> 1 | PR200
> 3.0 | EEC2
Vapor pressure
0.39psi | PR200
<1mm/hg | EEC2
Volcanoity (volume)
99.9 +% | PR200
99% (during heating) | EEC2
smell
Weak citrus | PR200
Coagulation point
-20 ℃ | EEC2
boiling point
94.4 | EEC2
See all 29 models in list
Part Number
Small excuse hot melt gun PT100
