All Categories

History

Tensile compression tester TGE series-Sanyu Electronics Industry Co., Ltd.

Price (excluding tax)

Estimate Required

Sanyu Electronics Industry Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

72.4hours


Model Filter

You can search for other models from each index. The displayed value is the value of the currently selected part number.

AD sampling

Allowable test force for speed range

Analog output

Auto zero function

Cycle test function Maximum number of repetitions

Cycle test function Maximum repetition rate

Cycle test function setting method

Display range

Exam space

Load cell capacity determination

Manual speed

Maximum test force

Measurement accuracy

Moving crosshead position measurement Analog output

Moving crosshead position measurement Display resolution

Moving crosshead position measurement Display unit

Moving crosshead position measurement Position display

Moving crosshead position measurement Zero reset

Moving crosshead position measurement display range

Moving crosshead speed range

Moving crosshead stroke

Number of views

Peak/break detection function

Return speed

Safety device EMERGENCY switch

Speed accuracy

Speed ​​setting method

Test effective width

Test force display

Unit of measurement

See all 4 models in list
  • Part Number

    TGE-100KN

Share this product


260+ people viewing

Last viewed: 5 minutes ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

Tensile compression tester TGE series TGE-100KN's performance table

Image Price (excluding tax) AD sampling Allowable test force for speed range Analog output Auto zero function Cycle test function Maximum number of repetitions Cycle test function Maximum repetition rate Cycle test function setting method Display range Exam space Load cell capacity determination Manual speed Maximum test force Measurement accuracy Moving crosshead position measurement Analog output Moving crosshead position measurement Display resolution Moving crosshead position measurement Display unit Moving crosshead position measurement Position display Moving crosshead position measurement Zero reset Moving crosshead position measurement display range Moving crosshead speed range Moving crosshead stroke Number of views Peak/break detection function Return speed Safety device EMERGENCY switch Speed accuracy Speed ​​setting method Test effective width Test force display Unit of measurement
Tensile compression tester TGE series-Part Number-TGE-100KN Available upon quote 1,000 times/s 100kN over the entire speed range DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately Automatic zero point adjustment using the “ZERO” key 10,000 times 5 times/min Cycle tests based on position values, cycles based on test force values, and combinations thereof are possible. -99,999~99,999 Tensile and compression tests are performed at the bottom of the moving crosshead. Upper tension type: sold separately With automatic discrimination function 3-speed switching system: HIGH, MIDDLE, and LOW 100kN Standard accuracy: ±1% of indicated value High accuracy: ±0.5% of indicated value (sold separately) TGE-LHP DC±5V (Output connector: BNC female) Load resistance 5kΩ or more, with scaling function Accuracy: ±0.5%F.S. Resolution: approx. 1/4,000 Output cable: sold separately 0.01 Mm (green LED) 6-digit digital display (-signed) Zero reset is possible at any position using the "RESET" key. -1,999.99~1,999.99 0.1mm/min, 0.5mm/min, 1mm/min~500mm/min Return speed only 0.1mm/min, 0.5mm/min, 1mm/min~550mm/min Effective distance between base and moving crosshead without test jig or load cell installed: 1,555mm 4 times/s After the test is completed, use the "PEAK/BREAK" key to display the peak test force value and position value or the test force value and position value at the break point. Set either test speed or preset 1 speed With overshootless function When activated, it stops the movement of the moving crosshead. (Lock type) ±0.5% of set speed or ±0.0025mm/min, whichever is greater Digital display settings via menu mode 600mm (lead screw protection cover included) 5-digit digital display (-signed) SI units mN, N, kN (green LED)

There are 4 models for this product.

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Tensile Testers Products

Other products of Sanyu Electronics Industry Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Sanyu Electronics Industry Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

72.4hrs

  • Japan

Category of this product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree