All Categories
History
Price (excluding tax)
■Optical fiber type robust temperature sensor ・Robust sensor for general purpose measurement ・Concrete embedded type for building monitoring ・Used as a temperature sensor or for temperature compensation of strain sensor FS62RSS ・Measurement range: -20℃~80℃ ・Use adhesive to ensure good heat conduction or simply secure with tie cables
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Bending radius of sensor part
External dimensions
FBG reflection wavelength
Fiber type
Hand width (FWHM), reflectance, sidelobe suppression
Input/output cable bending radius
Input/output cable length
Input/output cable type
Input/output connector
Installation method
Main material
Maximum calibration error
Measuring range
Operating humidity
Optical fiber cladding diameter/covering diameter
Resolution
Sensitivity
Storage humidity
Storage temperature
Temperature correction factor
Weight
Protection class
Part Number
FS63RTSHandling Company
Hottinger Brüel & KjærCategories
| Image | Price (excluding tax) | Bending radius of sensor part | External dimensions | FBG reflection wavelength | Fiber type | Hand width (FWHM), reflectance, sidelobe suppression | Input/output cable bending radius | Input/output cable length | Input/output cable type | Input/output connector | Installation method | Main material | Maximum calibration error | Measuring range | Operating humidity | Optical fiber cladding diameter/covering diameter | Protection class | Resolution | Sensitivity | Storage humidity | Storage temperature | Temperature correction factor | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | Cannot be bent | Length: 100±0.5, Fixed plate: Φ10±0.5mm | 1,500~1,600nm (±0.5) | SMF-28 compatible | ≤0.3nm, 21±4%, >10dB | Can be bent up to R30 (inductive loss less than 0.05 dB per turn when tested by wrapping the cable around a mandrel (cylindrical reel with a radius of 16 mm or 30 mm)) | 0~20m | Φ3mm armored cable (Hytrel, stainless steel spiral, Kevlar®, stainless steel woven mesh, LDPE) | FC/APC, SC/APC, NC (no connector) | Ensure contact by directly embedding or using adhesive (HBK 0X60, X120, X280) (e.g. cable ties) | Stainless steel, ormocer® (complete sensor configuration including cable is RoHS, REACH, Conflict Minerals and Fire Propagation Directive compliant) | ±0.5°C (To achieve the absolute measurements listed in this data sheet, the data logger must have an accuracy of at least ±2pm. Due to calibration, the measurement uncertainty is typically ±0.7°C. ) | -20~+80℃ | Less than 95% | 125/195μm | IP68 (according to European harmonized German standard DIN EN 60529) | 0.02℃ (Resolution 0.5pm in wavelength measurement is the value for data logger FS22SI) | 30pm/℃ (Typical value. Value for FBG with reflection wavelength 1,550nm) | Less than 95% | -20~+80℃ | 20 (μm/m) /℃ (Temperature correction coefficient refers to the "apparent induced strain" induced due to a temperature change of 1℃. Temperature compensation of strain sensors uses this value. ) | 117g (Weight when cable length is 2m and there are no connectors at both ends) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
![Optical fiber cord/cable [Single core] Optical patch cord-Alp Systems Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006900202410291.png)
![Optical fiber cord/cable [2 core] Optical patch cord-Alp Systems Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006900202410292.png)
