All Categories
History
Price (excluding tax)
■Optical fiber type laboratory temperature sensor ・Temperature measurement range: -40℃ to 100℃ small diameter sensor ・Ideal for temperature compensation of the FS62PSS or FS62WSS strain sensor with braided cable ・Use adhesive or tie cable to fix the sensor ・To ensure long-term durability, we recommend using aluminum foil ABM75 with soft putty or soft putty AK22.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Bending radius of sensor part
External dimensions
FBG reflection wavelength
Fiber type
Hand width (FWHM), reflectance, sidelobe suppression
Input/output cable bending radius
Input/output cable length
Input/output cable type
Input/output connector
Installation method
Main material
Maximum calibration error
Measuring range
Operating humidity
Optical fiber cladding diameter/covering diameter
Resolution
Sensitivity
Storage humidity
Storage temperature
Temperature correction factor
Weight
Protection class
Part Number
FS63LTSHandling Company
Hottinger Brüel & KjærCategories
| Image | Price (excluding tax) | Bending radius of sensor part | External dimensions | FBG reflection wavelength | Fiber type | Hand width (FWHM), reflectance, sidelobe suppression | Input/output cable bending radius | Input/output cable length | Input/output cable type | Input/output connector | Installation method | Main material | Maximum calibration error | Measuring range | Operating humidity | Optical fiber cladding diameter/covering diameter | Resolution | Sensitivity | Storage humidity | Storage temperature | Temperature correction factor | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | Cannot be bent | Φ2.6±0.5×65±0.5mm | 1,500~1,600nm (±0.5) | SMF-28 compatible | ≤0.3nm, 21±4%, >10dB | >16mm (Inductive loss less than 0.05dB per turn when tested by wrapping the cable around a mandrel (cylindrical reel with a radius of 16mm or 30mm)) | 0.5~6m | Φ1mm braid (glass fiber, silicone varnish) | FC/APC, SC/APC, NC (no connector) | Adhesive or tie cable | Stainless steel, ormocer® (the entire sensor configuration including the cable is RoHS, REACH, Conflict Minerals and Fire Propagation Directive compliant) | ±0.5°C (Absolute measurements described in this data sheet require an interrogator with at least ±2pm accuracy; typical traceability uncertainty is ±0.7°C) | -40~+100℃ | ≤100% | 125/195μm | 0.02℃ (Resolution 0.5pm in wavelength measurement is the value for interrogator FS22SI) | 30pm/℃ (Value for FBG with a wavelength of 1,550nm. Typical ordering example) | ＜95% | -20~+80℃ (limited by connector) | 20 (μm/m) /°C (Temperature correction factor (TCF) is the apparent induced strain caused by a 1°C temperature change. This value can be used to correct strain sensors) | 8g (when the cable length on both sides is 2m and there is no connector) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
![Optical fiber cord/cable [Single core] Optical patch cord-Alp Systems Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006900202410291.png)
![Optical fiber cord/cable [2 core] Optical patch cord-Alp Systems Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006900202410292.png)
