All Categories
History
Price (excluding tax)
You can search for other models from each index. The displayed value is the value of the currently selected part number.
ADC resolution
Analog channel
Analog input section connector
Analog input section input coupling-1
Analog input section input coupling-2
Analog input section input coupling-3
Analog input section input coupling-4
Analog input section input impedance
Antialias filter
Common Mode Rejection (CMR)
Common mode Maximum common mode voltage
Common mode range
Digital event/timer/counter
IEPE sensor input range
Input format
Input overload protection Maximum non-destructive voltage
Input overload protection Overload recovery time
Insulation
Maximum sampling rate per channel
Memory capacity per card
Passive voltage/current probe
Real-time cycle-based calculation function
Sensor
Slot width
TEDS
Voltage (all filters used) DC offset error
Voltage (all filters used) Offset error drift
Voltage (all filters used) RMS noise
Voltage (with all filters) DC gain error
Voltage (with all filters) Gain error drift
Part Number
GN815Handling Company
Hottinger Brüel & Kjær| Image | Price (excluding tax) | ADC resolution () | Analog channel () | Analog input section connector () | Analog input section input coupling-1 () | Analog input section input coupling-2 () | Analog input section input coupling-3 () | Analog input section input coupling-4 () | Analog input section input impedance () | Antialias filter () | Common Mode Rejection (CMR) () | Common mode Maximum common mode voltage () | Common mode range () | Digital event/timer/counter () | IEPE sensor input range () | Input format () | Input overload protection Maximum non-destructive voltage () | Input overload protection Overload recovery time () | Insulation () | Maximum sampling rate per channel () | Memory capacity per card () | Passive voltage/current probe () | Real-time cycle-based calculation function () | Sensor () | Slot width () | TEDS () | Voltage (all filters used) DC offset error () | Voltage (all filters used) Offset error drift () | Voltage (all filters used) RMS noise () | Voltage (with all filters) DC gain error () | Voltage (with all filters) Gain error drift () |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | 18bit | 8 | Insulated metal bnc | Coupling mode: AC, DC, GND | AC coupling frequency (1MΩ impedance): 1.6Hz±10%;-3dB | Range (1MΩ impedance): ±10mV, ±20mV, ±50mV, ±0.1V, ±0.2V, ±0.5V, ±1V, ±2V, ±5V, ±10V, ±20V, ±50V | Offset: ±50% at 1,000 steps (0.1%), offset fixed at 0% on ±50V range | 1MΩ impedance ≤±1V range: ±1%//58pF, >±1V range: ±10%, all other ranges: 66pF±10% | Fixed bandwidth analog AA filter combined with sampling rate tracking digital AA filter | >80dB @80Hz (typical 100dB) | 33V RMS | Less than ±2V | 16 digital events and 2 timer/counter channels | ±10mV, ±20mV, ±50mV, ±0.1V, ±0.2V, ±0.5V, ±1V, ±2V, ±5V, ±10V, ±20V | Analog, isolated, unbalanced differential | ±70V DC | Recovers to 0.1% accuracy within 5μs after 200% overload | Channel-to-channel and channel-to-chassis | 2MS/s | 2GB | Passive, single-ended voltage probe | 32; Cycle and timer-based calculations, with trigger function based on calculation results | IEPE | 1 | Class 1, old PE sensor | 0.01% of full scale ±35pV | ± (45ppm+5pV) /°C (± (25ppm+3pV) /°F) | 0.015% of full scale ±20pV (50Ω termination) | 0.035% of reading ±35pV | ±25ppm/°C (±14ppm/°F) |
Reviews shown here are reviews of companies.
