All Categories
History
Price (excluding tax)
Response Rate
100.0%
Response Time
19.5hours
Relatively Fast Response
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Applicable test piece
Automatic operation termination setting and operation
Automatic pressurization mechanism
Automatic stop (no depressurization work at abnormal stop/stop)
Body dimensions
Display
Drive motor
Earth leakage breaker
Friction force range (N・m)
Heated oil bath
High and low temperature constant temperature bath
High temperature constant temperature bath
Load detector
Low load torque arm
Mass
Maximum continuous operation time (hr)
Maximum rotating shaft torque (N・m)
Oil bath
Operation section
Power supply (cable length 5m, cable diameter Φ3)
Pressure load range
Pressure spring
Pseudo wear measurement device
Purpose
Shaft rotation speed (rpm)
Simple heating furnace
Sliding speed range (cm/sec) When using standard ring specimen
Specimens and mounting attachments
Temperature indicator
Control part dimensions
Part Number
EFM-3-1020Handling Company
A and Day Co., Ltd.Categories
| Image | Price (excluding tax) | Applicable test piece | Automatic operation termination setting and operation | Automatic pressurization mechanism | Automatic stop (no depressurization work at abnormal stop/stop) | Body dimensions | Control part dimensions | Display | Drive motor | Earth leakage breaker | Friction force range (N・m) | Heated oil bath | High and low temperature constant temperature bath | High temperature constant temperature bath | Load detector | Low load torque arm | Mass | Maximum continuous operation time (hr) | Maximum rotating shaft torque (N・m) | Oil bath | Operation section | Power supply (cable length 5m, cable diameter Φ3) | Pressure load range | Pressure spring | Pseudo wear measurement device | Purpose | Shaft rotation speed (rpm) | Simple heating furnace | Sliding speed range (cm/sec) When using standard ring specimen | Specimens and mounting attachments | Temperature indicator |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | Rings, discs, pins | Automatic testing will be stopped after depressurization work depending on operating time and various limit conditions. | Can be | Motor abnormality, pressurizing force full scale over, friction force full scale over, pressurizing movement upper and lower limits | 1,080 (W) × 1,000 (D) × 2,000 (H) mm | 640 (W) × 750 (D) × 1,835 (H) mm | Pressure detection value, friction force, rotation speed, simulated wear amount, test time, manual operation command button, rotation/stop | AC servo motor and AC spindle motor | Attached | 0.02~10 | ・Oil capacity: Approximately 800cc ・Maximum sliding speed: 200cm/sec ・Temperature control range: Rt~+300℃ ・Temperature control: ON-OFF control by PID operation | ・Cooling method: Liquid CO2 spray type ・Heating method: Hot air circulation ・Temperature range: -50~+200℃ ・Temperature distribution: ±5℃ (center Φ30, top and bottom 10mm) ・CO2 usage: 24 hours with 30kg cylinder | ・Heating method: Hot air circulation ・Temperature range: Rt~+200℃ ・Temperature distribution: ±5℃ (center Φ30, top and bottom 10mm) | Load cell type 5kN (for pressing force) ・1kN (for pressing force) ・100N (for pressing force/frictional force) ・20N (for frictional force) | ・Test load: MAX1,700g ・Torque arm mass: Approx. 150g ・Pressure weights: 500g x 2, 200g x 2, 100g x 1, 50g x 1 | Body: 950kg Control part: 200kg | 200 | 10 | ・Oil capacity: Approximately 250cc ・Maximum sliding speed: 200cm/sec | Color touch panel | AC200V, 14kVA | 26.5~5,000N | 3 types for 5kN, 1kN, and 100N | ・Measurement range: 0~2mm ・Display accuracy: 0.1%FS, with wear limiter (set on PC) | High speed, high torque wide type | 10,000 | ・Temperature range: Rt~+300℃ ・Temperature control: ON-OFF control by PID operation ・Temperature setting instructions: 3-digit digital type | 0.001~0.1, 0.1~10, 10~1,000, 3 ranges | ・Metal cylindrical test piece for temperature measurement (S45C) ・Disc test piece mounting attachment ・Square plate test piece mounting attachment ・Attachment for pin-on disc | For test pieces, temperature display 0~300℃, compatible with K thermocouple (sheath diameter Φ1mm) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
19.5hrs
