All Categories
This section provides an overview for rainwater infiltration systems as well as their applications and principles. Also, please take a look at the list of 20 rainwater infiltration system manufacturers and their company rankings. Here are the top-ranked rainwater infiltration system companies as of December, 2024: 1.Heritage Sanitation, Inc., 2.Contech Engineered Solutions LLC, 3.Santa Fe Water Systems.
Table of Contents
Rainwater infiltration facilities are designed to enable rainwater to percolate into the soil or underground. With guerrilla rains and linear precipitation zones causing rapid water flow into sewers and rivers, these facilities have become crucial in preventing floods and inundations. By promoting underground infiltration of rainwater, they also contribute to groundwater nurturing, especially in urbanized areas where farmland and wooded regions are diminishing.
These facilities are utilized for allowing rainwater to infiltrate the ground, aiding in flood prevention and groundwater recharge. They are installed in various locations, including buildings, residences, schools, and city halls. In some regions, municipalities subsidize the installation of these facilities to mitigate flooding. Often inconspicuous, resembling manhole covers, they are typically buried underground.
There are various types of rainwater infiltration facilities, often used in combination:
Infiltration basins connect gutters to cisterns that temporarily store rainwater and allow it to percolate into the soil through holes in their sides and bottom. These cisterns, made of materials like concrete, polypropylene, or polyvinyl chloride, are surrounded by crushed stone to facilitate percolation. Sometimes, a permeable sheet surrounds the crushed stone for enhanced effectiveness.
Eligibility for municipal subsidies may depend on specific conditions, such as the diameter of the infiltration trench.
Infiltration trenches, connected to rain gutters, are horizontally embedded pipes with holes to allow rainwater infiltration. Enhanced by connecting to infiltration troughs, these trenches are also surrounded by crushed stone and sometimes covered with permeable sheeting. Vertical arrangements, known as stick filters, are also used to allow deeper soil penetration.
Infiltration gutters are designed with fine holes for rainwater percolation. Surrounded by crushed stone and occasionally permeable sheets, porous concrete gutters are used for their reduced clogging risk.
Unlike regular asphalt pavement, permeable pavement allows rainwater to seep through. Its composition includes increased coarse aggregate and varied particle sizes to create gaps for water permeation. Drainage pavement is sometimes combined with regular asphalt to balance permeability with strength.
Regular maintenance is essential for these facilities to remain effective. High-pressure washers are used to clear sediment, leaves, and debris, preventing filter clogging. Weeds must also be managed to ensure unobstructed water flow. The performance of channels, trenches, and ditches can deteriorate if clogged with debris like fallen leaves or mud.
In permeable pavement, obstacles like discarded cigarettes or gum need removal, often requiring specific tools. Post-washing, the pavement is brushed to eliminate residual dirt.
*Including some distributors, etc.
Sort by Features
Sort by Area
Contech Engineered Solutions, founded in 1986, is a manufacturer and provider of infrastructure solutions based in the United States. Specializing in engineering and manufacturing, the company serves many sectors, including transportation, stormwater management, and bridges. Their portfolio includes bridges, drainage, erosion control, and stormwater management products and more. Supporting every aspect of the customer's project, their extensive network of local experts can help, providing agency and regulatory guidance, engineering calculations, solution development, and installation support.
StormTrap, established in 2002 and headquartered in Romeoville, Illinois, United States, is a designer and manufacturer of precast concrete systems for stormwater management. The company's products include underground chambers that store stormwater runoff and release it at a controlled rate and water quality systems that remove contaminants from stormwater runoff. These products are used by engineers, property and homeowners, and municipalities to manage runoff, protect waterways, and extend land use. The company encourages clients to work with its consultants to develop tailored solutions from its range of technologies, which include detention, infiltration, and stormwater lid systems.
Techo-Bloc, Inc. is a manufacturer of landscape products, which was founded in 1989 and is headquartered in Hubert, Longueuil, Kanada. The company delivers garden & retaining walls, fire pits & burners, outdoor kitchens, and permeable pavement. It also offers cleaners and sealants, pool coping & wall caps, patio slabs, and stone steps. Its variant of garden and retaining walls, Borealis retaining wall blocks, will never warp or rot and require little maintenance, unlike real wood.
Beijing Tidelion Science and Innovation Group Co., Ltd, established in 2003 and headquartered in Beijing, China, is a manufacturer of water control and rainwater utilization systems. The company’s product line includes plastic module combined pools, intelligent rainwater treatment machines, siphon rainwater hoppers, and PE linear drainage ditches. It also offers solutions such as rainwater collection and utilization systems, roof rainwater drainage, and a smart rainwater management system. Its marketing network covers the whole country and has expanded to more than 20 countries and regions, including Singapore, Sri Lanka, Iran, and the Maldives.
LayField, founded in 1978 and based in Richmond, British Columbia, Canada, is a manufacturer and supplier of polymer-based solutions. The company's product range includes Geosynthetics, Flexible Films, polymer-based solutions, installations, and manufacturing. These products offer protection for families, communities, and the environment, addressing various industrial challenges. The company serves industries such as industrial machinery manufacturing, environmental protection, community safety, and polymer applications. The company also provides services like manufacturing, distribution, installations, and customer support.
All Safety Products inc, founded in 2002 and located in Lakewood, California, is a distributor of safety products, equipment, and supplies. The company’s range of products includes hand and eye wash stations, first aid kits, wipes, sprays, and hats. These products are used for addressing emergencies, minor injuries, and maintaining cleanliness in various industrial and commercial settings, all designed to enhance workplace safety and hygiene. The company caters to industries such as construction, manufacturing, healthcare, laboratories, and industrial sectors.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Heritage Sanitation, Inc. |
17.6%
|
| 2 | Contech Engineered Solutions LLC |
17.6%
|
| 3 | Santa Fe Water Systems |
11.8%
|
| 4 | All Safety Products inc |
11.8%
|
| 5 | Porous Pave |
5.9%
|
| 6 | Beijing Tidelion Science and Innovation Group Co., Ltd |
5.9%
|
| 7 | Doodie Calls |
5.9%
|
| 8 | Jones Luxury Restroom |
5.9%
|
| 9 | Posh Privies |
5.9%
|
| 10 | VIP Restrooms, INC. |
5.9%
|
Derivation Method
The ranking is calculated based on the click share within the rainwater infiltration system page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
8 | 66.7% |
|
Canada
|
1 | 8.3% |
|
China
|
1 | 8.3% |
Netherlands
|
1 | 8.3% |
Germany
|
1 | 8.3% |
Kansai Polacon Co., Ltd.
190+ people viewing
Last viewed: 5 hours ago
Features of EMBX series (300) ■It is the smallest size infiltration basin. This is the smallest infiltration pit among our rainwater storage and in...
2 models listed
Kansai Polacon Co., Ltd.
370+ people viewing
Last viewed: 14 hours ago
Features of EMBX2 series (400/450/500/600) ■It is the product with the most proven results. This series is our most proven rainwater storage and in...
4 models listed
Chichibu Chemical
380+ people viewing
Last viewed: 17 hours ago
Significant reduction in construction area with outstanding water processing capacity The plastic rainwater storage and penetration facility "Nutr...
Kansai Polacon Co., Ltd.
330+ people viewing
Last viewed: 10 hours ago
Features of EMBX3 series (3054/4064/4575/5080/6090/3050) ■Structure compatible with heavy vehicles The EMBX3 series is a penetrating tank developed...
6 models listed
Joto Liplon Co., Ltd.
310+ people viewing
Last viewed: 7 hours ago
■ Pinpoint because it is “vertical” It maximizes its capacity in a small space and can be useful in a variety of situations, from local governments...
4 models listed
Tensho Electric Industry Co., Ltd.
140+ people viewing
Last viewed: 1 day ago
In recent years, many water-related problems have occurred, such as urban flooding and the depletion of spring water. The occurrence of localized h...
Kansai Polacon Co., Ltd.
150+ people viewing
Last viewed: 4 hours ago
Features of EBP series ■This product is suitable for the Yamato River basin. The EBP series is one of our square infiltration basins and was develo...
2 models listed
Kansai Polacon Co., Ltd.
220+ people viewing
Features of EM series ■It is a round shape and the smallest size infiltration basin. This is the smallest size infiltration basin in the round shap...
4 models listed
Kansai Polacon Co., Ltd.
330+ people viewing
Last viewed: 15 hours ago
Features of EMC series ■This is the most popular round infiltration basin. The EMC series is the most popular round infiltration basin. They come i...
4 models listed
Kansai Polacon Co., Ltd.
160+ people viewing
Last viewed: 12 minutes ago
Features of FVP series ■This is our only gate-type infiltration gutter. By laying a special foundation plate on the bottom where invert concrete wo...
8 models listed
Kansai Polacon Co., Ltd.
170+ people viewing
Last viewed: 2 hours ago
Features of EBU series ■This is our only gate-type infiltration gutter. By laying a special foundation plate on the bottom where invert concrete wo...
10 models listed
Kansai Polacon Co., Ltd.
250+ people viewing
Last viewed: 1 day ago
Features of OPPU series ■Structured to accommodate heavy vehicles The structure is compatible with heavy vehicles (T-25 vertical/cross-traverse), s...
4 models listed
Kansai Polacon Co., Ltd.
190+ people viewing
Last viewed: 7 hours ago
Features of APU series ■Suitable for variable gradients The APU series is our range of rainwater storage and infiltration gutters in the widest ran...
8 models listed
Kansai Polacon Co., Ltd.
170+ people viewing
Last viewed: 4 hours ago
Features of EU series ■There is a large opening on the bottom It has a cross-beam structure with a large opening at the bottom to allow rainwater t...
5 models listed
Kansai Polacon Co., Ltd.
440+ people viewing
Last viewed: 6 hours ago
Features of OPU/OPUL series ■It is a product that can be connected to JIS products. This is the most popular rainwater infiltration gutter with the...
10 models listed
Kansai Polacon Co., Ltd.
170+ people viewing
Last viewed: 17 hours ago
Features of OPU/OPUL series ■It is a product that can be connected to JIS products. This is the most popular rainwater infiltration gutter with the...
10 models listed
Kansai Polacon Co., Ltd.
210+ people viewing
Last viewed: 6 hours ago
Features of OSPU series ■It is a product that can be connected to JIS products. Among the JIS standards set by the Japan Industrial Standards Commi...
4 models listed
Kansai Polacon Co., Ltd.
160+ people viewing
Last viewed: 1 day ago
Features of EW series ■Has the maximum amount of storage infiltration The EW series is the product series with the largest throughput (capacity) of...
4 models listed
Kansai Polacon Co., Ltd.
100+ people viewing
Last viewed: 3 hours ago
■Main uses Common lids and fittings for E/K series
8 models listed
Kansai Polacon Co., Ltd.
250+ people viewing
Last viewed: 1 day ago
Features of the E series ■Can be used in conjunction with other infiltration facilities By installing infiltration Polacon pipes between the basins...
3 models listed
Kansai Polacon Co., Ltd.
250+ people viewing
Last viewed: 13 hours ago
Features of PU series ■It is a product that can be connected to JIS products. Among the JIS stipulated by the Japan Industrial Standards Committee ...
10 models listed
Kansai Polacon Co., Ltd.
190+ people viewing
Last viewed: 1 day ago
Features of APU series ■Suitable for variable gradients The APU series is our range of rainwater storage and infiltration gutters in the widest ran...
8 models listed
Kansai Polacon Co., Ltd.
70+ people viewing
Last viewed: 1 day ago
Features of SPU series ■It is a product that can be connected to JIS products. Among the JIS standards set by the Japan Industrial Standards Commit...
4 models listed
Kansai Polacon Co., Ltd.
120+ people viewing
Last viewed: 6 hours ago
Features of EBU series ■Structured to accommodate heavy vehicles The structure is compatible with heavy vehicles (T-25), so it can be used in a var...
6 models listed
Kansai Polacon Co., Ltd.
150+ people viewing
Last viewed: 28 minutes ago
Features of FVP series ■Structured to accommodate heavy vehicles The structure is compatible with heavy vehicles (T-25 vertical section only), so i...
8 models listed
Kansai Polacon Co., Ltd.
150+ people viewing
K series features ■Improve ground conditions The K series evenly collects and drains groundwater from all over the ground where you want to prevent...
4 models listed
Joto Liplon Co., Ltd.
160+ people viewing
Last viewed: 1 day ago
■For preventing water puddles in bunkers Eliminates puddles in bunkers with pinpoint precision. ■Water puddle problem in the bunker ・Consistently...
