27 Epoxy Resin Putty Manufacturers in 2024
This section provides an overview for epoxy resin putties as well as their applications and principles. Also, please take a look at the list of 27 epoxy resin putty manufacturers and their company rankings. Here are the top-ranked epoxy resin putty companies as of November, 2024: 1.ThreeBond International, Inc., 2.Polyguard, 3.LAM PLAN S.A.S.
Table of Contents
What Is an Epoxy Resin Putty?
Epoxy resin putty is a paste-like mixture of synthetic resin emulsion, pigment, and filler as the main ingredients.
Although synthetic resin emulsion putty is in paste form, it dries and hardens over time. The drying time depends on the temperature and humidity of the environment in which the epoxy resin putty is used, so it is best to check the degree of drying by touch.
The advantage is that it is easy to handle, while the disadvantage is that its strength is weak and the places where it can be used are limited.
Uses of Epoxy Resin Putty
Because of its weak strength, epoxy resin putty is often used as a finishing material or underlayment.
It is mainly used as a base for finishing the surface of materials such as plywood, asbestos slate, gypsum board, mortar, and concrete with synthetic resin emulsion paint. On construction sites, it is often used to fill in nail holes in the joints between the nail holes and the joints between the gypsum boards before wallpaper is applied.
When used as a finishing material, it is used in places where it is unlikely to be exposed to moisture, such as rainwater. It is often used for the purpose of repairing walls, especially in general households.
Types of Epoxy Resin Putties
There are two types of epoxy resin putty: general type and water-resistant type.
1. General Type
General type is characterized by adhesion strength of 2.5 kgf/cm2 or higher (24.5 N/cm2 or higher). Since there are no standards for water resistance or alkali resistance, which are weak points of epoxy resin putty, many of them are vulnerable to moisture.
2. Water-Resistant Type
The water-resistant type not only has stronger adhesion strength of 5.0 kgf/cm2 or more (49.0 N/cm2 or more) than the general type, but also has standards for water resistance and alkali resistance. Therefore, among epoxy resin putties, this product is specialized in water and alkali resistance.
3. For Thin Coatings and Thick Coatings
General type and water-resistant type are also classified into two types: one for thin application with a maximum thickness of 0.5 mm per coating, and the other for thick application with a maximum thickness of 1.5 mm per coating. The time required for drying differs greatly, with the thin coating type requiring up to 5 hours to dry and the thick coating type requiring up to 24 hours. Depending on the type of putty used, some thick-application putties can also be used as thin-application putties, so they can be used in different ways depending on the application.
Characteristics of Epoxy Resin Putty
Epoxy resin putty has advantages and disadvantages in terms of where it can and cannot be used, its application, handling, and workability, so it must be used according to its intended purpose.
Advantages
Synthetic resin emulsion putty is a material suitable for indoor use. Some do not need to be kneaded with water, and can be used without worrying about the mixing ratio, etc. The easy handling makes it easy to use even for DIY beginners.
Some putty is not easily thinned by drying or cracked when filling screw holes or joints. Some fillers are highly abrasive and can be easily sanded with sandpaper, making them easy to work with.
Disadvantages
Epoxy resin putty cannot be used outdoors or outside. This is because condensation causes the epoxy resin putty to peel when used outdoors or outside. Therefore, it cannot be used to prepare mortar or concrete surfaces outdoors. Because of its lack of strength, although it can be used for finished surfaces, it cannot be used for repairs that require the strength of the structure itself, such as no-shrink mortar.
Because it is not a material that hardens through a chemical reaction, once a container is opened and use begins, it may dry out and become unusable. Therefore, care should be taken with the amount used and storage method.
How to Use Epoxy Resin Putty
Some epoxy resin putty can be diluted with water, while others can be used without dilution. Most of them can be used immediately after opening the container. Some of them can be used without dilution, but they are sometimes diluted to soften the putty before use in order to make it easier to work with.
The best places to use putty are screw holes and joints in gypsum board, and uneven or uneven indoor concrete surfaces. Apply epoxy resin putty to the area where you want to make a base using a spatula.
After the applied epoxy resin putty dries, sandpaper is used to polish the surface to create a smooth base.
Depending on the type of epoxy resin putty used, the putty may become thin or cracked due to the thickness of the coating or the degree of dilution. It is recommended to check the characteristics of the epoxy resin putty to be used when actually working with the putty.
List of 27 Epoxy Resin Putty Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- China
- France
- Germany
- United Kingdom
-
-
-
ThreeBond International, Inc.
EPOXY AND ACRYLIC STRUCTURAL ADHESIVES
Manufacturer Overview
ThreeBond International, Inc. is a manufacturer of industrial adhesives, sealants, and coating established in 1997 and headquartered in Cincinnati, OH. The adhesives include anaerobic adhesives, functional heat-resistant adhesive sheets, cyanoacrylate instant adhesives, acrylic structural adhesives, and instant adhesives. The sealants are liquid gaskets, silicone RTV sealants, and polymer sealants. The company also has degreasing agents and cleaners for industrial brakes & parts and offers pre-coated nuts and bolts. The ISO 9001 and 14001-certified company serves the automotive manufacturing, fuel cell, electronics, nail care, and medical industries.
-
-
-
-
-
Miller-Stephenson, Inc.
EPOXY RESIN SYSTEMS
Manufacturer Overview
Miller Stephenson Chemicals was founded in 1955 with its headquarters in Danbury, Connecticut and it is a manufacturer and producer of chemicals. The company manufactures and produces chemicals. The products include Krytox lubricants, mold release agents, industrial and medical coatings, conformal coatings, epoxy resin systems, medical products, and high-performance solvents. The company's provided products are applicable in release and anti-stick coatings, keyboard lubricants, high-purity cleanroom solvents, aerospace, automotive, robotic, and automation processes, among others. This company is compliant with ISO 10993.
-
-
-
-
-
Star Technology, Inc.
Epoxy Repair Compounds
Manufacturer Overview
Star Technology, Inc. is a manufacturer and supplier of adhesives and potting compounds established in 1989 and located in Waterloo, Indiana, USA. The company’s products include waterborne acrylics and urethanes for environmentally friendly coatings or adhesives, as well as standard epoxy and UV cure acrylates for industrial applications. It also offers potting compounds for protecting electronic assemblies from moisture, and flame retardant urethanes for demanding environments. The company is ISO 9001:2015-certified, and mainly serves clients in the industrial processing and manufacturing sectors.
-
-
-
-
-
Extec Corp.
Cold Mounting Systems
Manufacturer Overview
Extec Corp, established in 1975 in Enfield, Connecticut is a manufacturer of precision sample preparation and material testing equipment. The company’s specialization lies in manufacturing cutting-edge machines for cutting, grinding, polishing, and analyzing various materials. Its products offer several benefits, including optimal accuracy, repeatability, and efficiency in sample preparation and testing processes. The equipment enhances research and quality control efforts in industries such as materials science, metallurgy, geology, and manufacturing. From cutting samples for microscopic examination to grinding and polishing for accurate analysis, the products play a crucial role in ensuring precise results.
-
-
-
-
Manufacturer Overview
Dymax Corporation was founded in 1980 and is headquartered in Torrington, Connecticut. The company develops and manufactures rapid and light-curable materials and light-curing systems for the medical, consumer electronics, wearables, aerospace, and automotive electronics industries. The company’s product segments include Light Curable Materials, Light-Curing Equipment, and Dispensing Equipment. Light Curable Materials include masking, gasketing, and activators. Light-Curing Equipment includes conveyor systems, flood-curing systems, and radiometers. Dispensing Equipment includes dispense valves, syringe dispensers, and material reservoirs. The company also offers application engineering, equipment, and system integration services.
-
-
-
-
-
Hexcel
Prepregs & Resins
Company Overview
Hexcel, founded in 1948 and headquartered in Stamford, Connecticut, USA, is a manufacturer and supplier of composite materials and solutions. The company's product range includes carbon fiber reinforcements, resin systems, and honeycomb products, serving industries like commercial aerospace, industrial applications, and space and defense. Its ISO 9001:2015 certification reflects its devotion to enhancing product quality and customer satisfaction. With more than 7 decades of experience, the company consistently exceeds expectations in quality and service, boasting a global customer base.
-
-
-
-
-
Laizhou Weiyi experimental machine manufacturing Co., Ltd.
Cold inlay
Manufacturer Overview
Laizhou Weiyi experimental machine manufacturing Co. Ltd., established in 1986, is a manufacturer of environmental engineering and consulting services, and is headquartered in Beijing, China. It offers a wide range of services to its customers such as Wastewater treatment, Solid waste management, and Hazardous waste management. The main products of the company include Metallographic cutting machines, Metallographic grinding and polishing machines, and Metallographic microscopes. These products are used by aerospace, automotive, and manufacturing industries. The company is ISO 9001:2015 certified and is a member of the China Chamber of Commerce for Import and Export of Machinery and Electronics (CCCME).
-
-
-
-
-
TPH Bausysteme GmbH
Low-viscous 2-component injection resin based on epoxy
Manufacturer Overview
TPH Bausysteme GmbH is based in Aichi, Japan, and is a manufacturer of waterproofing and tunneling products that was originally founded in 1948 before being acquired by Sika in 2020. The company primarily produces equipment used for waterproofing and surface protection. Its products include piezoresistive pressure transmitters, industrial-grade cutting tools, and CO2 meters. The company also offers product consultation, technical support, and calibration certification services. It mainly serves clients in the wood and metal processing, petrochemical, and HVAC industries.
-
-
-
-
-
Electrolube
Adhesive Epoxy Resin
Manufacturer Overview
Electrolube, founded in, Ashby de la Zouch, Leicestershire, in 1941 is a manufacturer of chemical products for the electronics and industrial manufacturing industries. The company's product portfolio includes Conformal Coatings, Potting Compounds, Thermal Interface Materials, and Encapsulation Resins, Specialist Cleaners. Their products are used in industries such as Food and Beverage, Pharmaceutical and Biotechnology, Chemical and Petrochemical, Environmental Testing and electronics. The company operates in 60 countries. and has a global distribution network.
-
-
-
-
-
ALWA
Epoxy resin
Manufacturer Overview
ALWA GmbH, established in 1986 and headquartered in Gronau, Germany, is a manufacturer and distributor of synthetic resin systems used for model and mold making. Its product range includes release agents, casting compounds, and porous blocks, as well as other products like fast-casting resin, silicone compounds, and additives. It has sales partners in over 15 countries worldwide, including Turkey, China, and India. These products are used with filler mixtures to make molds, mainly for processing thermoplastics and in the ceramic industry. The materials can also be used in applications like electro-casting, foundries, and air film sliding technology.
-
-
-
-
-
WEBAC-Chemie GmbH
Epoxy Resin Putty
Manufacturer Overview
WEBAC, established in 1978, is headquartered in Lehrte, Germany, and operates as a manufacturer and supplier of specialty chemicals and equipment for the construction industry. Their product line includes injection resins, sealants, grouts, and waterproofing solutions. Their products find applications in various industries such as civil engineering, infrastructure, tunneling, and restoration. Injection resins are used for crack repair and reinforcement, sealants for joint sealing, grouts for stabilization, and waterproofing solutions for moisture protection. WEBAC maintains certifications like ISO 9001, ensuring standards of products in demanding construction applications.
-
-
-
-
-
WEICON GmbH & Co. KG
Epoxy Resin Putty
Manufacturer Overview
WEICON GmbH & Co. KG, headquartered in Münster, Nordrhein-Westfalen, has been a manufacturer of chemo-technical products and specialty tools since 1947. Its wide-ranging product portfolio comprises special adhesives and sealants, technical sprays, as well as assembly pastes and greases for various industrial sectors. Its offerings cater to areas such as production, repair, maintenance, and servicing. Apart from chemical products, the company also engages in the development and distribution of stripping tools under its own brand, WEICON TOOLS.
-
-
-
-
-
Raytech
Rayresin
Manufacturer Overview
Raytech, S.r.l., founded in 1995, is an Italian manufacturer in Settimo Milanese, Lombardy, producing electrical cable accessories and components. The company, supported by IEC 60587-certified high-voltage and physical-chemical laboratories, offers a range of low-voltage products, including joints, fillers, and heat shrinks. Medium-voltage products include heat- and cold-shrink terminations and joints, separable connectors, and sheaths and tapes. The company also produces heating cables for domestic and industrial applications. It serves global customers, supported by a distribution network in over 36 countries. The company notably received the silver medal of the EcoVadis Sustainable Procurement Leadership Awards in 2023.
-
-
-
-
-
Dr. Dietrich Müller GmbH
GRP solid bars Epoxy
Company Overview
Dr. Dietrich Müller GmbH, established in 1967 and headquartered in Germany, is a manufacturer and supplier specializing in electrical insulation materials. The company offers a wide range of products, including electrical insulation films, adhesive tapes, and gaskets, which find applications in various industries, primarily serving the electronics and electrical sectors. These products are used for ensuring electrical insulation, securing and insulating electrical components, and sealing electronic enclosures, thus maintaining the functionality of electronic devices and systems.
-
-
-
-
-
LAM PLAN S.A.S
Cold mounting resins
Company Overview
LAM PLAN S.A.S, a company founded in 1962 and based in Gaillard, France, is a manufacturer and supplier of polishing technologies. The company's product portfolio includes cutting machines, micromotors, as well as lapping and polishing machines. These products find applications in various industries, including aeronautics, nuclear energy, and the watchmaking industry. The company also offers services, including consultation, training, and maintenance. The company holds ISO 9001 certification and operates globally with networks in various countries, such as Italy, Singapore, and Australia.
-
-
-
-
-
Gurit
EPOXY RESINS & ADHESIVES
Company Overview
Gurit is a manufacturer and supplier of advanced composite materials, tooling automation, and structural engineering services. Their material range includes structural core materials, profiles, prepregs, and formulated products like laminating resins. Operating globally, Gurit has a reach in multiple countries. As a partner in the renewable energy sector, Gurit specializes in wind turbine blade innovation, contributing to wind energy competitiveness and sustainable growth. In sectors like marine, construction, and transportation, they offer materials and expertise to foster a sustainable economy.
-
-
-
-
-
Polyguard
2-Part Epoxies
-
-
-
-
-
Royal Diamond
Resins
-
-
-
-
-
Suzhou Sinye Materials Technology Co., Ltd.
Acrylic Resin Series
-
-
-
-
-
INDUSTRIA CHIMICA REGGIANA – I.C.R. S.p.A.
Resin coating
-
-
-
-
-
-
EPOXONIC
Special Resins
-
-
-
-
-
Ilpa Adesivi Srl
Resins
-
-
-
-
-
Kisling AG
Epoxy resin
-
-
-
-
-
RESOLTECH
Epoxy
-
-
-
-
-
Anhui Liweida new material Co.,Ltd.
Resin Series
-
-
-
-
-
Pressure Vacuum Level Ltd.
Epoxy Resin Putty
Distributor Overview
Pressure Vacuum Level Ltd., founded in 1992 and based in the United Kingdom, serves as a supplier of measurement and control instruments for pressure, vacuum, and level applications. The company offers a range of products, including pressure gauges, vacuum sensors, and level transmitters. These instruments cater to industries like pharmaceuticals, food processing, industrial manufacturing, and oil and gas. The company equips these industries with the tools needed to monitor and maintain pressure, vacuum, and level conditions in processes, ensuring safety, efficiency, and quality control in many operations.
-
-
Epoxy Resin Putty Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | ThreeBond International, Inc. |
14.0%
|
| 2 | Polyguard |
10.0%
|
| 3 | LAM PLAN S.A.S |
8.0%
|
| 4 | Star Technology, Inc. |
8.0%
|
| 5 | Pressure Vacuum Level Ltd. |
6.0%
|
| 6 | Gurit |
6.0%
|
| 7 | Hexcel |
6.0%
|
| 8 | Royal Diamond |
4.0%
|
| 9 | Suzhou Sinye Materials Technology Co., Ltd. |
4.0%
|
| 10 | TLM |
4.0%
|
Derivation Method
The ranking is calculated based on the click share within the epoxy resin putty page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
- Laizhou Weiyi experimental machine manufacturing Co., Ltd.: 2001 (23 years ago)
- Star Technology, Inc.: 1989 (35 years ago)
- ALWA: 1986 (38 years ago)
Company with a History
- Gurit: 1835 (189 years ago)
- Miller-Stephenson, Inc.: 1955 (69 years ago)
- LAM PLAN S.A.S: 1962 (62 years ago)
Epoxy Resin Putty Manufacturers in United States
*Including some distributors, etc.
- ThreeBond International, Inc.
- Miller-Stephenson, Inc.
- Star Technology, Inc.
- Extec Corp.
- DYMAX
- Hexcel
Global Distribution of Epoxy Resin Putty Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
6 | 40.0% |
Germany
|
5 | 33.3% |
United Kingdom
|
2 | 13.3% |
China
|
1 | 6.7% |
France
|
1 | 6.7% |
List of Epoxy Resin Putty Products
6 products are listed.
Kansai Patate Kako Co., Ltd.
Water -resistant seal sticker putty in the excellent adhesion section
30+ people viewing
The seal putty is a sticker material with polybetene resin and synthetic adhesive, which has excellent adhesion. It is a putty with excellent long ...
Kansai Patate Kako Co., Ltd.
Long -term chemical stability and anomolic putty cell seal
30+ people viewing
It is a seal material made from polybetene resin and synthetic adhesive, and has excellent adhesion. Flame retardance. Car material fuel test. It i...
Kansai Patate Kako Co., Ltd.
Long-term chemical stability and anomalic putty-cell seal A-01
40+ people viewing
It is a seal material made from polybetene resin and synthetic adhesive, and has excellent adhesion. Flame retardance. It is a putty with excellent...
