30 Bearing Puller Manufacturers in 2024
This section provides an overview for bearing pullers as well as their applications and principles. Also, please take a look at the list of 30 bearing puller manufacturers and their company rankings. Here are the top-ranked bearing puller companies as of November, 2024: 1.Cal-Van & Horizon Tool Inc., 2.SKF, 3.Orion Motor Tech.
Table of Contents
What Is a Bearing Puller?
A bearing puller is a tool used to remove bearings assembled in facilities and equipment. By using the force of the screw to pull out the bearing, even bearings that are difficult to pull out by hand can be easily removed.
A similar tool is the gear puller, distinguished by its notably different jaw shape. Given that Gears are typically used individually, gear pullers feature thicker hooks and longer jaws. However, because two or more bearings are often stacked together, the jaws of a bearing puller are thinner and shorter so that they can fit into the gap between them.
There are also types of bearing pullers that hook onto the inner ring as well as the outer ring of the bearing.
How to Use a Bearing Puller
To use a bearing puller, hook the jaws onto the outer circumference of the target bearing and tighten the bolts to hold the jaws in place so that they do not come off. Then, tighten the center bolt until it hits the shaft on which the bearing is assembled. While supporting the center bolt and pawl so that they do not come off, apply a wrench or the like to the hexagonal part and tighten it hard, and the bearing will be pulled out by the pawl.
For the bearing puller for the inside diameter, as the center bolt is screwed in, the jaws spread out and catch on the inside diameter. Once the pawl is firmly hooked, pull it out in the manner of a knock pin extractor. In addition to that type, there is also a type that can be pulled out by screwing in the same way as for the outer ring.
How to Select a Bearing Puller
To use a bearing puller, it is first necessary to select one for the outer ring or the inner ring. For bearings attached to a shaft, select a type that hangs its jaws on the outer ring. For bearings attached to another case like a bearing box, select a type that hangs on the inner ring.
The size of the outer ring will vary from body to body. One type of bearing puller is sufficient for a certain size bearing. However, if the bearing is too large or too small, a different-size bearing puller must be used. Poor jaw fit can lead to bearing damage and jaw wear.
Selecting the size for the inner ring allows the jaws to be interchangeable so that multiple sizes of jaws can be provided for one set of main units. If the correct size for the bearing is not chosen, the pawl may disengage when pulled. Ensure the pawl is securely hooked onto the bearing before extraction.
List of 30 Bearing Puller Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- China
- France
- India
- Italy
- Japan
- Spain
- Sweden
- Taiwan
- United Kingdom
-
-
-
Cal-Van & Horizon Tool Inc.
BEARING PULLERS AND SEPARATORS
Manufacturer Overview
Cal-Van & Horizon Tool Inc., established in 1980 and headquartered in Greensboro, North Carolina, USA, is a manufacturer of various automotive and mechanics tools. The company's product range includes multiple tools and equipment for professional mechanics, automotive technicians, and enthusiasts. It holds ISO 9001 certification, verifying its tools are built to rigorous standards. Its precision tools offer benefits such as enhanced efficiency, accuracy, and durability, resulting in cost-effective and stable solutions for various applications within the automotive and mechanical industries, serving professionals and DIYers alike with the comprehensive range of products.
-
-
-
-
-
LifeSignals
Inner bearing puller
Manufacturer Overview
LifeSignals, founded in 2006 and headquartered in San Jose, California, is a manufacturer of silicon, chip products, and biosensors. The company specializes in wearable biosensor technology, developing non-invasive remote monitoring solutions. Its main product is the LifeSignals ECG Patch, offering continuous electrocardiogram monitoring. The company specializes in biometric data acquisition and transmission, primarily in remote patient monitoring for cardiac health and chronic disease management. Its technology finds applications in the healthcare, telemedicine, and wellness sectors.
-
-
-
-
-
-
-
E.P.P. Euro Press Pack S.p.a.
PULLERS AND EXTRACTORS
Manufacturer Overview
E.P.P. Euro Press Pack S.p.a. is a manufacturer of hydraulic equipment and components that was established in Liguria, Italy in 1969 before its acquisition by Japan’s MinebeaMitsumi Group in 2017. The company primarily produces hydraulic presses, pumps, and cylinders for high-pressure industrial applications. It also offers valves, jacks, and related accessories for its product lineup. The company is certified to ISO 9001 and ISO 14001 standards, and provides custom manufacturing and onsite maintenance services for its clients.
-
-
-
-
-
FACOM
Pullers
Manufacturer Overview
Facom, founded in 1918 and now a subsidiary of Stanley Black & Decker Inc., is a hand tool manufacturer headquartered in Morangis, Ile-de-France, France. The company's product range includes boosters, pliers, light-emitting diode lights and torches, torque control devices, and lifting equipment. The company also offers safety lock systems to prevent foreign material exclusions when working at heights. These products find applications in various industries, including automotive, especially the car-racing sector, aerospace, deep-sea exploration, and extreme sports.
-
-
-
-
-
Larzep
Hydraulic Pullers
Manufacturer Overview
Larzep is based in Guipúzcoa, Spain, and is a manufacturer of hydraulic equipment for high pressure applications that was established in 1940 as a part of the Mondragón group of companies. The company’s product lineup includes electric, air, and hydrotest pumps for powering hydraulic tools or cylinders. It also offers cylinders and jacks for high-force operations such as lifting or bending, presses for forming or straightening operations, and spreaders for aligning flanges or doors. The company chiefly serves client’s in Europe’s construction, mining, and energy industries.
-
-
-
-
-
SKF
BEARING PULLERS
Manufacturer Overview
SKF UK is the British division of SKF, originally founded in 1907 and headquartered in Gothenburg, Sweden. SKF designs, develops, and manufacturers bearings, seals, lubrication systems, and services worldwide, with industrial and automotive segments, providing solutions for industries including aerospace, agriculture, transportation, food and beverage, general machinery, material handling, mining, energy, paper, and wind energy. SKF UK offers rolling bearings, mounted bearings, automotive seals, lubrication management, vehicle aftermarket services, waste electric products, and electronic equipment products as well as services including maintenance, remanufacturing, customization, and training.
-
-
-
-
-
VIKTEC
Bearing Puller Set
Manufacturer Overview
Viktec is a professional specialty tool manufacturer of mechanic specialty tools, with its headquarters located in Zhejiang, China. The company manufactures over 800 types of mechanic specialty tools and export to over 100 counties. Some of its key products include engine specialty tools, suspension tools, steering tools, brake tools, bearing tools, as well as glow plug tools, and ball joint tools. These tools are primarily used in the automotive industry for various purposes such as maintenance and repair. Its tools have passed the CE, Reach, TUV certification, and its factory has passed the ISO9001:2008 audit.
-
-
-
-
-
SUNBRIGHT TOOLS CO.,LTD
Bearing Puller
Manufacturer Overview
SUNBRIGHT TOOLS CO.,LTD is a manufacturer and supplier of automotive tools that was established in 2008 and is headquartered in Jinhua,Zhejiang, China. The company produces a wide range of tools, including air conditioning tools, auto body repair tools, brake tools, cooling system tools, electrical service tools. Its products such as torque wrenches, impact wrenches, and sockets are used by a number of automotive repair shops and DIY enthusiasts around the world. SUNBRIGHT TOOLS also provides a range of services, including OEM manufacturing, shipping and delivery, return policy, warranty and support.
-
-
-
-
-
EKTA ENTERPRISES
Bearing Puller
Manufacturer Overview
EKTA ENTERPRISES, established in 1999 and headquartered in Vadodara, Gujarat, India, is a manufacturer, exporter, and supplier specializing in plant maintenance for the process industry. A few of its offerings include bearing pullers, jaw pullers, mechanical pullers, hydraulic pullers, and bearing induction heaters. Its products are used in industries like petrochemicals, fertilizers, refineries, and power plants for mounting and dismounting industrial parts. The company follows strict quality control norms during production, packaging, and distribution processes, in which all processes are executed in compliance with the international parameters of quality.
-
-
-
-
-
Deeps Tools Pvt. Ltd.,
BEARING PULLER
Manufacturer Overview
Deeps Tools Pvt. Ltd., founded in 1979 and headquartered in Ludhiana, Punjab, India, is a manufacturer and supplier of drop forged hand tools. Its diverse product lineup includes essential tools like spanners/wrenches, pivotal for tightening and loosening nuts and bolts, pliers designed for gripping and holding objects, screwdrivers pivotal for turning screws, and hammers, used for striking tasks. These tools cater to professional and domestic applications for manual tasks. The company holds several certifications including ISO 14001 and ISO 9001 certificates.
-
-
-
-
-
Swan Machine Tools Private Limited.
Inside Bearing Puller
Manufacturer Overview
Swan Machine Tools Private Limited., founded in Gujarat, India, in 1993 is a manufacturer of industrial products and machine tools. The company's product range includes ball screws, electric controls and drives used for delivering advanced automation control, and electric drives used for power machine tool movements. The company serves industries such as Oil and Gas, Industrial Machinery, Robotics, power generation and Medical Equipment. They also provide services including product selection, installation, preventative maintenance, troubleshooting and repair and customer support.
-
-
-
-
-
Shen Feng Tools Co., Ltd.
HYDRAULIC BEARING PUSHER&PULLER KIT
Manufacturer Overview
Shen Feng Tools Co., Ltd., established in 1991, is a manufacturer of hydraulic maintenance tools located in Taichung City, Taiwan. Having invented the hydraulic bearing puller in 1990, the company has expanded its product range, now marketed under the brand OMAR STAR. This range includes hydraulic bearing pusher and puller kits, hydraulic pullers, and mechanical pullers. Other offerings encompass pulling plates, puller arms, flange spreaders, nut splitters, and impact fitting tools. These products are crafted to meet the requirements of original equipment manufacturers (OEMs) and original design manufacturers (ODMs).
-
-
-
-
-
SPX Flow
POSI LOCK PULLERS
Manufacturer Overview
SPX Flow, established in 1912, is a manufacturer of industrial machinery to solve processing challenges based in Charlotte, North Carolina. The company manufactures various machinery such as mixers, pumps, valves, homogenizers, and heat exchangers. The machinery is used in nutrition, health, mining, construction, and chemical industries. The company provides services such as designing, engineering, and installing turnkey process units or full-scale plants. The SPX Flow brands include Anhydro, Bran+Luebbe, Gerstenberg Schrӧder, Pneumatic Products and Seital Separation.
-
-
-
-
-
Schaeffler Group USA
Bearing Puller
Manufacturer Overview
Schaeffler, established in 1946, is headquartered in Fort Mill, South Carolina, USA, and is a manufacturer and supplier of precision components and systems for the automotive and industrial sectors. The company's product portfolio encompasses a wide range of bearings, linear guidance systems, engine components, and precision machinery. These components are crucial for ensuring the smooth and efficient operation in various machinery and equipment. Schaeffler's products find applications in diverse industries, including automotive, aerospace, and renewable energy. the company aims to provide advanced solutions that enhance performance and efficiency while reducing environmental impact.
-
-
-
-
-
ENERPAC
Basic Hydraulic Pullers
Manufacturer Overview
Enerpac, since 1910, has been a manufacturer of advanced industrial tools and a service provider located in MenomoneeFalls, Wisconsin, USA. The company produces power units, machine moving tools, pipe blenders, tension meters, and load cells. It also created cutters, gantries, presses, cylinders, and strand jacks used in aerospace, bridges, automotive, mining, and power generation industries. The firm offers rental products, training, hydraulic education, and services such as bolting, tool crib inspection, and calibration. It has 8 manufacturing facilities in The Netherlands, USA, Spain, UK, China, and India.
-
-
-
-
-
OTC Tools
BLIND BEARING PULLER SET
Manufacturer Overview
OTC Tools, is a company founded in the year 1934, based in Minnesota, USA, as a manufacturer and supplier of tools and equipment. Their product portfolio includes service jacks, jack stands, pullers, motorcycle tools, slide hammers, suspension tools, scan tools, heavy-duty, and TPMS. The products are used in multiple industries which include electronic diagnostics, shop equipment, and inventory supplies. The company also provides customer service, technical support, promotions, and locations of best buy.
-
-
-
-
-
Posi Lock
Manual Pullers
Manufacturer Overview
Posi Lock Puller, Inc., headquartered in Cooperstown, North Dakota, USA, has been operating as a manufacturer of industrial pulling and extraction tools since 1978. Its products find application in diverse industries, including automotive, aerospace, and manufacturing. Designed for safe and efficient removal of gears, bearings, and components, Posi Lock's offerings include manual and hydraulic pullers with various capacities, while its specialized tools also encompass gear pullers, bearing splitters, and vises, providing solutions for precision tasks.
-
-
-
-
-
Hi-Force
SCP Range
Company Overview
Hi-Force, established in 1982 and based in the United Kingdom, is a manufacturer and supplier of hydraulic tools. The company produces other products such as hydraulic cylinders, tough lift jacking systems, bolt tensioners, hydro test pumps, and crimpers and cutters. Apart from this, the company also manufactures 2000 products and supplies to different industries. Apart from this, the company also caters to services such as short- and long-term rental tools, tool repairs, maintenance, and training services with ECITB-approved mechanical joint integrity certification.
-
-
-
-
-
A.O.K. INDUSTRIAL CO.
Pullers
Company Overview
A.O.K. Industrial Co., founded in 1979 and headquartered in Taichung, Taiwan, is a manufacturer and supplier of hand tools, auto specialty tools, and air tools. The company offers a wide range of products, including the DR reactionless air ratchet, an interchangeable digital torque handle, hex key wrench set, an extended cut-off tool, and the DR side-to-side composite impact wrench. These tools have various applications in the automotive industry, as well as in the construction and household sectors. They facilitate tasks related to repair and maintenance, including assembly, fastening, and precision torquing.
-
-
-
-
-
Baier hydraulic Power Wuhan Co., Ltd
puller
Company Overview
Baier Hydraulic Power Wuhan Co. Ltd, established in 2009 and based in Wuhan, China, is an ISO 14001, CE, and ISO 9001 certified manufacturer and supplier of hydraulic torque tools. The company's products include hydraulic jacks, hydraulic pumps, and bolting tools. The company serves industries such as construction, engineering, manufacturing, and maintenance. It also provides services such as enhancing product development, provision of quality assurance, and helps its customers in delivering their products and services.
-
-
-
-
-
Griphold Engineering Private Limited
Hydraulic Tools & Equipment
Company Overview
Griphold Engineering Private Limited was founded in Gujarat, India, in 1996 as a manufacturer, supplier, trader, and exporter of heavy-duty industrial tools and equipment. The copmany offers a wide range of products, including hydraulic equipment, tool kits, pneumatic tools, torque wrenches, and cylinder jacks. These products are used in various industries, such as iron, petrochemicals, mining, automobiles, and shipbuilding. Its industrial tools and bolting solutions can also be customized upon client’s requests.
-
-
-
-
-
SUPER TOOL co. ltd.
BEARING PULLER SET BP15S / 30S / BP30FS
Company Overview
SUPER TOOL Co., Ltd., established in 1918 in Japan, is a manufacturer of general and specialized tools for building and bridge construction, civil engineering, shipbuilding, and similar industries. The company offers an extensive line of specialty tools used by tradespeople and skilled workers that includes ratchet wrenches, clamps, portable cranes, jig clamping tools, piping tools, and more. SUPER TOOL Co., Ltd. also offers custom tool design and production as well as custom machinery production for commercial clients.
-
-
-
-
-
Prime Tools & Equipment Private Limited.
Prime Hydraulic Jaw Puller
Company Overview
Prime Tools & Equipment Private Limited (PTE) is an Indian manufacturer and distributor of various industrial tools that was established in 2009 in New Delhi. The company's products include different types of torque wrenches, tube expanders, impact sockets, spring balancers, and hydraulic jacks. Among the brands they stock are Prime, Tohnichi, and Blue Point. PTE also offers rental and calibration services to their clients in a wide range of industries, such as heavy engineering, automotives, white goods and petrochemical processing.
-
-
-
-
-
Parget Industrial Company Limited
Bearing Puller
Company Overview
Parget Industrial Co., based in Taiwan and founded in 1983 by George and Gloria, is a manufacturer, exporter, and supplier of high-end professional tools. The company originally exported Taiwanese hand tools but expanded to include manufacturing in Vietnam and Taiwan. The company’s quality of tools is demonstrated through ISO 9001-2008 certification, and in 2005, they introduced their brand, LICOTA. The company offers limited lifetime warranties and aims to expand global brand recognition in the high-end professional tool market. With a new facility in Taichung and a branch in Shanghai, Parget serves clients worldwide, delivering high-end quality tools and after-sales services.
-
-
-
-
-
PROTO
POWER TOOLS
Company Overview
PROTO Industrial Tools, originally founded as PLOMB Tools in 1907 and currently a subsidiary of Stanley Black & Decker, is an American manufacturer and distributor headquartered in Jackson, Tennessee, specializing in industrial tools. Under the PROTO brand, the company offers industrial tools, including master sets, tethered tools, drive tools, and related accessories. The company also operates under the STANLEY TOOLS brand, offering tool storage solutions, hand and impact sockets, screwdrivers and hex keys, and cutting tools. These tools are heat-forged and nickel-plated to withstand harsh work environments in various industries, including automotive and aerospace, oil, gas, and petrochemical, and power generation.
-
-
-
-
-
-
-
Eastman Cast and Forge Ltd.
Bearing Puller
Company Overview
Eastman Hand Tools, a part of the Eastman Group, began its operations in 1989, as a manufactuer of utility products in accordance with international standards (DIN, JIS, ANSI), based in India. The company’s state-of-the-art infrastructure empowers it to produce over 24 million tools per annum, catering to a wide range of industries. Their product portfolio encompasses a wide range of offerings, including hand tools, OEM tool kits, and cleansing solutions. With touch points in 35+ countries across USA, Europe, Asia, and the CIS region, including key markets like Russia and Ukraine.
-
-
-
-
-
Simson Power Tools AB
Hydraulic tools, kits & accessories
-
-
-
-
-
AmPro Tools
HYDRAULIC GEAR PULLER
Distributor Overview
AmPro Tools, established in 1984 and headquartered in Taipei, Taiwan, operates as a distributor and supplier of professional tools and equipment for the construction and automotive industry. The company offers an extensive product line that encompasses hand tools, automotive specialty tools, pneumatic tools and accessories, power tools & equipment, and tool storage. It also provides OEM services, ensuring the fulfillment of its clients' desired specifications. Its programs include custom packaging and artwork designed to enhance product marketability. It serves a diverse customer base in over 80 countries worldwide, including the United States, Europe, the Middle East, Australia, and Asia.
-
-
Bearing Puller Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Cal-Van & Horizon Tool Inc. |
9.4%
|
| 2 | SKF |
9.4%
|
| 3 | Orion Motor Tech |
6.0%
|
| 4 | VIKTEC |
6.0%
|
| 5 | E.P.P. Euro Press Pack S.p.a. |
5.1%
|
| 6 | SUNBRIGHT TOOLS CO.,LTD |
5.1%
|
| 7 | LifeSignals |
5.1%
|
| 8 | Schaeffler Group USA |
5.1%
|
| 9 | Bearing Pro Tools |
4.3%
|
| 10 | Swan Machine Tools Private Limited. |
4.3%
|
Derivation Method
The ranking is calculated based on the click share within the bearing puller page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- SPX Flow: 4,500
- EKTA ENTERPRISES: 14
Newly Established Company
- Prime Tools & Equipment Private Limited.: 2009 (15 years ago)
- Baier hydraulic Power Wuhan Co., Ltd: 2009 (15 years ago)
- EKTA ENTERPRISES: 1999 (25 years ago)
Company with a History
- SKF: 1907 (117 years ago)
- ENERPAC: 1910 (114 years ago)
- Larzep: 1940 (84 years ago)
Bearing Puller Manufacturers in United States
*Including some distributors, etc.
Global Distribution of Bearing Puller Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
India
|
6 | 27.3% |
United States of America
|
3 | 13.6% |
China
|
3 | 13.6% |
Taiwan
|
3 | 13.6% |
United Kingdom
|
2 | 9.1% |
Italy
|
1 | 4.5% |
France
|
1 | 4.5% |
Spain
|
1 | 4.5% |
Sweden
|
1 | 4.5% |
Japan
|
1 | 4.5% |
