Muromoto Iron Works Co., Ltd.'s Nippers

It is especially small and precisely finished. ■Features Soft cover with spring [Replacement spring] MBN- 04 (10 pieces)

• Tools

• Nippers

The blade surface is flush with the head surface. ■Features Comes with a soft cover, spring, and stopper to prevent misalignment of the blade. [R...

• Tools

• Nippers

For cutting that places greater emphasis on cutting accuracy. ■Features ・The blade has been made even sharper than the conventional product "160S...

• Tools

• Nippers

It has a blade at the tip. Please use it for cutting deep areas. ■Features Soft cover with spring [Replacement spring] MBN- 01 (10 pieces)

• Tools

• Nippers

The cutting edge is finished at an acute angle, making it suitable for cutting using the tip of the blade. ■Features Soft cover with spring [Repl...

• Tools

• Nippers

The caulking part is close to the blade part, and the eccentric lever principle provides excellent sharpness. ■Features ・Soft cover ・With spring...

2 models listed

• Tools

• Nippers

The back of the blade is hollowed out, making it suitable for gap cutting. ■Features Soft cover with spring [Replacement spring] MBN- 04 (10 pieces)

• Tools

• Nippers

The blade has been specially heat treated, making it highly wear resistant. The head is particularly strong. ■Features ・Soft cover ・With spring ...

2 models listed

• Tools

• Nippers

The heads of 405-7 and 8 have been made smaller to make them lighter and easier to use. ■Features ・Soft cover ・With spring [Replacement spring]...

• Tools

• Nippers

■For copper wire, soft iron wire, resin, etc. ・405-7A, 8A thin blade type. -The thin blade makes the cut almost straight. ■Features ・Soft cover ...

• Tools

• Nippers

The heads of 405-7 and 8 have been made smaller to make them lighter and easier to use. ■Features ・Soft cover ・With spring [Replacement spring]...

• Tools

• Nippers

■For copper wire, soft iron wire, resin, etc. ・405-7A, 8A thin blade type. -The thin blade makes the cut almost straight. ■Features ・Soft cover ...

• Tools

• Nippers

Widely used for cutting light electrical equipment, precision equipment, etc. ■Features soft cover

2 models listed

• Tools

• Nippers

It has a shedding hole. ■Features Soft cover with spring [Replacement spring] MBN- 04 (10 pieces)

• Tools

• Nippers

This is a spring-equipped version of the standard 550-150 two-piece diagonal nipper (without spring). The capacity is the same, but it is recommend...

• Tools

• Nippers

For cutting lead wires of electronic components. ■Features ・Soft cover ・Spring ・With spring fall prevention pin [Replacement spring] MBN- 01 (...

• Tools

• Nippers

For continuous cutting of PC board lead wires and precision cutting of other electronic devices. ■Features ・Soft cover ・With spring [Replacemen...

• Tools

• Nippers

Please incorporate it into the tip of a robot or equipment and use it for cutting, caulking, bending work, etc.

3 models listed

• Tools

• Nippers

Please incorporate it into the tip of a robot or equipment and use it for cutting, caulking, bending work, etc.

• Tools

• Nippers

Only one side of the spare blade works. Particularly suitable for caulking, hole punching, and notching work.

5 models listed

• Tools

• Nippers

Only one side of the spare blade works. Particularly suitable for caulking, hole punching, and notching work.

5 models listed

• Tools

• Nippers

For cutting work on concave R surfaces. ■Features Comes with soft cover, spring, stopper to prevent blade misalignment, and stopper to prevent spr...

• Tools

• Nippers

For cutting work on convex R surfaces.

• Tools

• Nippers

For cutting lead wires, etc. ■Features Soft cover with spring [Replacement spring] MBN- 05 (10 pieces)

• Tools

• Nippers

For cutting resin molded products at multiple locations at the same time. Replacement blades will be made separately to match the molded product.

5 models listed

• Tools

• Nippers

■Summary - Please use it by incorporating it into various cutting devices. Ideal for cutting objects with narrow gaps. ・This machine does not have...

4 models listed

• Tools

• Nippers

No timing unit required. There are no restrictions on the mounting direction, and there is no horizontal wobbling. When air is introduced, it adher...

3 models listed

• Tools

• Nippers

For cutting resin molded products at multiple locations at the same time. Replacement blades will be made separately to match the molded product.

3 models listed

• Tools

• Nippers

■Air nipper for snap ring For attaching and detaching snap rings.

• Tools

• Nippers

Cutting, crimping, bending, punching, and caulking. Air nipper connected to pressure booster. Hose joint...G1/4 (male thread)

9 models listed

• Tools

• Nippers

■For automation of cutting and caulking work. When installing the machine, subtle adjustments can be made to suit the product. 1) When the MR-M ty...

10 models listed

• Tools

• Nippers

■Pressure type MP-MG type ・One-touch screw pin - Blades can be replaced without tools.

2 models listed

• Tools

• Nippers

The grasping part is thin, so it is easy to handle even for people with small hands. ■Suitable for the following cases. ・When the MR type lacks p...

2 models listed

• Tools

• Nippers

■For cutting, crimping, and crushing work. The MP35A model is powerful and has the widest range of uses. ■Suitable for the following cases. ・When...

2 models listed

• Tools

• Nippers

After lightly holding the crimp terminal with the crimping part of the replaceable blade, this machine inserts the wire and performs the crimping o...

2 models listed

• Tools

• Nippers

■Cutting, crimping, bending, punching, caulking The standard type is widely used. In addition, the use of spare blades can save labor in various ta...

10 models listed

• Tools

• Nippers

■Without lever MR-M type ・For automation of cutting and caulking work. - When installing the machine, subtle adjustments can be made to suit the p...

10 models listed

• Tools

• Nippers

■Standard type MR-MG type ・One-touch screw pin - Blades can be replaced without tools.

2 models listed

• Tools

• Nippers

■Standard type MR-MT type ・With body fixing nut -Easy to set on the machine.

2 models listed

• Tools

• Nippers

The main body is rectangular and has numerous mounting screw holes, making it extremely easy to set up on machines.

8 models listed

• Tools

• Nippers

■Features - Blades can be easily replaced even in narrow spaces. - Blade opening can be adjusted. (MS3G does not come with a blade opening adjustme...

6 models listed

• Tools

• Nippers

■Four-way solenoid valve usage type/double acting type Due to the use of a four-way solenoid valve, the response speed is fast and it is especially...

3 models listed

• Tools

• Nippers

A bearing is built into the back of the replacement blade holding plate. Flexibly grips the tip (fulcrum) of the spare blade to reduce rattling whe...

3 models listed

• Tools

• Nippers

The tip is rounded and thin, making it easier to use in narrow spaces.

3 models listed

• Tools

• Nippers

The main body is rectangular and has numerous mounting screw holes, making it extremely easy to set up on machines.

7 models listed

• Tools

• Nippers

■Features - Blades can be easily replaced even in narrow spaces. - Blade opening can be adjusted. (MSP3G does not come with a blade opening adjustm...

6 models listed

• Tools

• Nippers

For cutting piano wire up to φ0.5mm. The durability of the cutting edge is outstanding. ■Features Soft cover with spring [Replacement spring] MBN...

• Tools

• Nippers

Easily cuts even in narrow spaces. ■Features Soft cover with spring [Replacement spring] MBN- 01 (10 pieces)

• Tools

• Nippers

Can cut through obstacles. ■Features Soft cover with spring [Replacement spring] MBN- 01 (10 pieces)

• Tools

• Nippers

For cutting deep areas. ■Features Soft cover with spring [Replacement spring] MBN- 01 (10 pieces)

• Tools

• Nippers

Sword sold separately

6 models listed

• Tools

• Nippers

Blade sold separately

6 models listed

• Tools

• Nippers

■Features ・Stable operation with guide rail specifications ・Maximum stroke 10mm (Note: Varies depending on the air pressure used.) ・With blade o...

• Tools

• Nippers

The WS type does not use a return spring for either the main body or the blade. Blades can be easily replaced even in tight spaces. ■Features - Si...

4 models listed

• Tools

• Nippers