10 Spanner Manufacturers in 2024
This section provides an overview for spanners as well as their applications and principles. Also, please take a look at the list of 10 spanner manufacturers and their company rankings.
Table of Contents
What Is a Wrench?
A wrench is a tool used to tighten or loosen a hexagonal bolt or nut. The wrench is inserted into the two parallel hexagonal surfaces of the bolt or nut and force is applied by hand to transmit torque. A wrench is also known as tools for tightening and loosening hexagonal bolts and nuts. "Spanner" is the British English word and "Wrench" is the American English word. There is no difference in their original meanings, and the difference between a wrench and a spanner is not clearly defined.
Uses of Wrenches
Wrenches are used to fasten or loosen hexagonal bolts, nuts, and other screws with two parallel sides. They are indispensable fastening tools for machinery and equipment, precision instruments, vehicles, engines, construction, furniture, DIY, and all other situations. They are highly versatile and their range of use is very wide. One method of preventing nuts from loosening is the double nut method, in which two nuts are stacked on top of each other, but wrenches are always required for double nut fastening. In most cases, two wrenches are used for fastening.
Characteristics of Wrenches
Wrenches are not suitable for turning a bolt or nut 360°, because it requires a large space to do so. Therefore, they are often tightened first by hand or with other tools, such as a screwdriver, to the point of temporary tightening, and then finally tightened with a wrench. Since wrenches tighten on two sides, applying excessive force can deform the bolt/nut or damage the tool. When tightening with a large torque, spectacle wrenches (which receive force at the six apex points) should be used. For parts that require a wrench with a large amount of force, a striking wrench is used. This wrench can apply large force instantaneously by striking the tip of the handle with a hammer or the like. It can be used when retightening is necessary or for nuts that are rusted and cannot be loosened.
The nominal dimensions and sizes of wrenches are expressed in terms of the dimension of the 2-sided width (the dimension of the open part). Therefore, even if it is not a bolt or nut, the wrenches can be used by matching its dimensions. With a round shaft, the wrenches can be used by taking out two sides, and with a small torque, the wrenches can be used by only taking out one side (so-called "D cut").
List of 10 Spanner Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- India
- Japan
- Taiwan
-
-
-
Samruddhi Industries.
Torque Wrench
Manufacturer Overview
Samruddhi Industries., in Ahmedabad, India, in 2005 is a manufacturer of testing equipment. The company's product portfolio includes ACCUPLUS Measuring Instruments, Scientific Lab Testing Instruments, Paint Testing Instruments, Coating Thickness Gauge and Precision Measuring Instrument. Their products are used in industries such as Food and Beverage, Pharmaceutical and Biotechnology, Chemical and Petrochemical, Environmental Testing and healthcare. The company provides services such as Product Selection Guidance, Engineering Support, and Custom Manufacturing.
-
-
-
-
-
Duro Impex
Wrench Tools
Manufacturer Overview
Duro Impex, founded in 2002, and headquartered in Ludhiana, Punjab, India, is an ISO 9001:2008 manufacturer, exporter, and supplier of screwdrivers and hand tools. Their product range comprises various types of screwdrivers with different heads and designs, including reversible, flat tip, and hex screwdrivers. Additionally, they offer a wide array of hand tools like aviation tin snips and socket sets, along with OEM's customized screwdrivers for original equipment manufacturers. Their product lineup also includes screwdriver kits and wire stripper cutters, catering to diverse industries such as automotive, metalworking, woodworking, electrical, and plumbing.
-
-
-
-
-
APACH INDUSTRIAL CO., LTD.
Air Impact Wrench
Manufacturer Overview
Apach Industrial Co., LTD., a global manufacturer, innovator, and pioneer of pneumatic tools, established in Taichung, Taiwan, in 1994. The company's primary goal is to design meticulous nailer guns and specicalizing in manufacturing and developing various items such as hand tools, air pneumatics, nailers, and staplers. Also, it emphasizes the longevity of its goods, as it implements certification procedures that include inspecting all components and parts before distributing them to clients.
-
-
-
-
-
Alok International Pvt. Ltd
Wrench
Manufacturer Overview
Alok International Pvt. Ltd, established in 1974 and headquartered in Gurugram, India, is a manufacturer and exporter of quality tools used in textiles, garments, electronics, machinery and The company's products, which include cutting, hand, lubrication, industrial, and precision tools, are ISO9001 certified and unmatched by competitors. The culture for innovation, improvement, and new technological adoption enables the company to fabricate products appraised and tested under ideal engineering conditions to meet client specifications.
-
-
-
-
-
Shinano Inc.
Impact Wrenches
Manufacturer Overview
Shinano Inc., established in 1949 and headquartered in Itabashi, Tokyo, Japan, is a manufacturer specializing in air tools. The company offers a diverse range of products, including ratchet wrenches, impact wrenches, screwdrivers, sanders, as well as polishers, grinders, drills/spot mills, and cutting tools. These precision-engineered tools are utilized for various applications such as in car repair and assembly lines. Additionally, the company has held the ISO 9001 certification since 2006, signifying its adherence to quality standards.
-
-
-
-
-
Prime Tools & Equipment Private Limited.
Torque Wrenches
Company Overview
Prime Tools & Equipment Private Limited (PTE) is an Indian manufacturer and distributor of various industrial tools that was established in 2009 in New Delhi. The company's products include different types of torque wrenches, tube expanders, impact sockets, spring balancers, and hydraulic jacks. Among the brands they stock are Prime, Tohnichi, and Blue Point. PTE also offers rental and calibration services to their clients in a wide range of industries, such as heavy engineering, automotives, white goods and petrochemical processing.
-
-
-
-
-
Parget Industrial Company Limited
Ratchet Wrench Series
Company Overview
Parget Industrial Co., based in Taiwan and founded in 1983 by George and Gloria, is a manufacturer, exporter, and supplier of high-end professional tools. The company originally exported Taiwanese hand tools but expanded to include manufacturing in Vietnam and Taiwan. The company’s quality of tools is demonstrated through ISO 9001-2008 certification, and in 2005, they introduced their brand, LICOTA. The company offers limited lifetime warranties and aims to expand global brand recognition in the high-end professional tool market. With a new facility in Taichung and a branch in Shanghai, Parget serves clients worldwide, delivering high-end quality tools and after-sales services.
-
-
-
-
-
Torque-Tech Precision Co., Ltd
Torque Wrench
Company Overview
Torque-Tech Precision Co., Ltd, founded in Taiwan, in 2000 is a manufacturer of Torque Wrench and torque screwdriver. The company's product portfolio includes torque testers, torque multiplier, Torque Wrench Accessories and injection molded components for various applications, including electronics, consumer goods, and packaging. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. The company has partnerships and collaborations with distributors, retailers, and industrial suppliers.
-
-
-
-
-
Eastman Cast and Forge Ltd.
Wrenches
Company Overview
Eastman Hand Tools, a part of the Eastman Group, began its operations in 1989, as a manufactuer of utility products in accordance with international standards (DIN, JIS, ANSI), based in India. The company’s state-of-the-art infrastructure empowers it to produce over 24 million tools per annum, catering to a wide range of industries. Their product portfolio encompasses a wide range of offerings, including hand tools, OEM tool kits, and cleansing solutions. With touch points in 35+ countries across USA, Europe, Asia, and the CIS region, including key markets like Russia and Ukraine.
-
-
-
-
-
WRIGHT
Wrenches
Distributor Overview
Wright Tool Company was established in 1948 and primarily centered on producing wrenches, ratchets, sockets, and attachments, and its headquarters is in Warren, Michigan. The company has gained recognition for its obligation to deliver outstanding quality and reliability tools. The company has transformed and now operates as a distributor of tools and equipment. It leverages its engineering and manufacturing capabilities to cater to many sectors, such as industries, institutions, and service trades. Additionally, it has gained approval from the United States government to provide the military with its products. It offers comprehensive resources for maintenance, repair, and operations solutions.
-
-
Spanner Manufacturer Ranking
*Including some distributors, etc.Number of Employees
- Shinano Inc.: 50
Newly Established Company
- Prime Tools & Equipment Private Limited.: 2009 (15 years ago)
- Samruddhi Industries.: 2005 (19 years ago)
- Duro Impex: 2002 (22 years ago)
Company with a History
- WRIGHT: 1927 (97 years ago)
- Shinano Inc.: 1949 (75 years ago)
- Parget Industrial Company Limited: 1983 (41 years ago)
Global Distribution of Spanner Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
India
|
5 | 55.6% |
Taiwan
|
3 | 33.3% |
Japan
|
1 | 11.1% |
List of Spanner Products
10 products are listed.
Seiwa Industry Co., Ltd.
Supporting diverse sizes all -purpose spanners
20+ people viewing
■ Features ・ Applied nominal diameter 1/4 to 1 inch all -purpose spanner ・ Installation of couplers and joints of various sizes and removal ・ Ea...
Engineer
Spanner -type ultra -thin mini -pana set
40+ people viewing
■ Features ･ A super -thin spanner set with only 1.5mm thickness. ･ Glasses, a spanner combination type. ･ The head has a 30 ° bending angle. ■ Us...
Engineer
Super -thin mini pana of spanner
50+ people viewing
■ Features ･ Ultra -thin spanner with only 1.5mm thickness. ･ Glasses, a spanner combination type. ･ The head has a 30 ° bending angle. ■ Use ･ To...
