This section provides an overview for chip saws as well as their applications and principles. Also, please take a look at the list of 20 chip saw manufacturers and their company rankings. Here are the top-ranked chip saw companies as of March, 2024: 1.YANSAM TOOLS, 2.Scotchman Industries, Inc., 3.KANSAI SAW MFG. CO., LTD.
Table of Contents
A Chip Saw refers to a blade attached to a circular saw used for cutting materials such as wood, steel, and aluminum.
A circular saw for metalworking made of HSS steel is called a metal saw, and the brazed carbide tips on the blade edge characterize a chip saw.
While it can efficiently and cleanly cut wood and is user-friendly for processing, it is a hazardous tool that can cause serious injury if used or mishandled.
Chip saws are mainly used for cutting wood, but different materials can be cut depending on the type of chips used.
The following four types of chips are used for chip saws:
In addition, chip saws are also used for cutting aluminum sashes and plywood, making them indispensable tools in the construction field.
Chip saws are always labeled with a description of the blade's properties, so it is important to check the description and select the appropriate blade.
The following is how to read the description:
If there is a Chip Saw with "100 x 1.0 x 30T(P)":
100 represents the outer diameter of the blade, which must be at least 6 times longer than the thickness of the material to be cut.
1.0 represents the thickness of the blade. The thinner the thickness, the lower the load, and thus the lower the power motor can process. However, the lower the rigidity, the higher the risk of cracking. A thicker blade can be machined more smoothly because of the reduced vibration.
30T(P) represents the number of blades. A small number of blades allows for faster cutting but has the disadvantage of a rough cut surface and more burrs.
If the number of blades is large, the cut surface is finished cleanly, and in the case of thin tin or plywood, the board is less likely to be violent, making it effective for cutting thin sheets. On the other hand, cutting speed is slower, so it is not suitable for thicker materials.
*Including some distributors, etc.
Sort by Features
Sort by Area
Western Saw & Engineering, since 1930, has been a manufacturer of diamond cores, saw bodies, diamond core bit tubes, and carbide plates used in agricultural applications, the automotive sector, polishing machines, transportation, and load test machines. The Oxnard, CA, based company has capabilities and services such as intricate laser cutting, heat treating, part leveling & straightening, surface grinding, and precision CNC machining services. Custom tube rolling and tube cutoff services are also provided.
Behringer Saws, Inc. is a Pennsylvania-based manufacturer of sawing systems and structural fabricating equipment. Founded in 1988 as an independent branch of Behringer GmbH in Germany, the company produces circular saws and bandsaws, as well as profile machining centers for beams, plates and angles. The company serves various industries with demanding sawing and fabricating requirements such as the aerospace, automotive, and construction sectors. Behringer Saws, Inc. also offers training, tech support, and spare parts to their clients, along with custom solutions and service contracts covering maintenance and calibration for their products.
Scotchman Industries, Inc., established in 1950 is a manufacturer and supplier of new and used equipment such as ironworkers, saws, pipe notchers, hydraulic press, and measuring systems used in metal fabrication applications based in Philip, South Dakota The measuring systems portfolio includes manual, digital, and semi-auto positioning systems, full auto feed systems, and digital caliper tables. The company also offers various tooling including toolings for saws, ironworkers, pipe notchers, and hydraulic presses.
Evolution Power Tools, established in 1992 and based in Sheffield, South Yorkshire, is a manufacturer of power tools. Its offered power tool are designed for cutting various materials, including aluminum, diamond masonry, mild steel, wood, and steel. Its product range encompasses circular saws, diamond tools, and saw blades. With additional offices and distribution centers in the United States, the company provides sales and support for North America and Canada. The company own offices in France and China, along with a network of agents across more than 30 countries, making its power tools accessible to a wide and diverse international market.
Miner Saw Inc., established in 1997 and headquartered in Tuscumbia, Alabama, USA, is a manufacturer of a wide array of cutting tools and saw blades. The product portfolio includes circular saw blades, band saw blades, carbide-tipped saw blades, and custom cutting tools. These precision-engineered cutting tools are used for durability, sharpness, and cutting accuracy, making them essential for various industries, including woodworking, metalworking, and construction. The products are designed to enhance cutting efficiency, reduce material waste, and improve overall cutting performance.
Dewalt Inc. is a power tool manufacturing firm started in 1924 by Raymond DeWalt. It began as a small enterprise in Maryland but quickly expanded. They were reformed and reincorporated as DeWalt Inc. in 1947 and were purchased by American Machine & Foundry Co.Inc in 1949. Dewalt Inc. provides a diverse range of products such as power tools, hand tools, accessories, outdoor equipment, and workplace equipment. As of 2001, they produced and sold over 200 hand power equipment and 800 accessories. DeWalt is now a well-known tool brand among commercial contractors.
KYNKO Industrial Limited was established in 1993 and is headquartered in Quanzhou, Fujian, China, as a manufacturer of professional power tools. Their twelve series of products comprise grinding and cutting tools, hammering and drilling tools, stoneworking tools, woodworking tools, and metalworking tools, among others. The company's main items are rotary hammers, angle grinders, and marble cutters. For operations like constructing, shaping, making, and mending, these products have applications in construction, manufacturing, woodworking, metalworking, and automotive, among others. The products are extensively employed in the shipbuilding, stone processing, and construction industries.
Unitec Power Tools (Unitec) was founded in 1990 and operates out of Norwalk Connecticut and Deer Park, Texas. The company is a developer and producer of tools for metalworking, concrete, masonry, petrochemical, hazardous environments and Ex Zones, underwater, and mining. The company developed the first air-powered band saw in 1991. The company's tool types include cutting tools, surface preparation tools, dust collection systems, safety tools, and various specialty tools. The company offers support in both English and Spanish.
YANSAM TOOLS is an ISO 9001-certified manufacturer of metal sawing tools founded in 2004 and headquartered in Zhejiang, China. The company’s product line covers high-speed steel circular saws, solid carbide DIN saws, and circular knives. It also offers HSS and DIN circular saw blades, cermet saw blades, and carbide-tipped saw blades. The company operates modern workshops with automated production lines equipped with NACHI vacuum heat treatment equipment, PVD coating equipment, CNC gear grinding machines, and a range of advanced equipment and instruments for precise testing.
NC Network Co., Ltd., launched in 1998 and based in Tokyo, Japan, is a supplier of matching services in the form of a website for manufacturing companies. The company offers its factory search engine service so that the buyers can find the appropriate manufacturers to partner with. It also provides assistance, website design, manufacturing technology, video filming, and marketing services to small and medium-sized manufacturers. Its processing department acts as a mediator between registered companies and manufacturers so that the execution would be seamless.
KANSAI SAW MFG. CO., LTD, established in 1919 in Miki Town, Hyogo, is a manufacturer and supplier of saw blades and gardening machine blades. The company's product range includes chip saw blades, string trimmers and lines, Hand saws, accessories, and syuriken. These products are designed for woodworking and gardening tasks, primarily serving the woodworking, construction, and gardening industries. In its approach to business, the company emphasizes product development, integration of new technology with time-tested expertise, and a commitment to sustainability.
Ranking as of March 2024
Derivation MethodRank | Company | Click Share |
---|---|---|
1 | Freud America, Inc |
40.0%
|
2 | YANSAM TOOLS |
20.0%
|
3 | Scotchman Industries, Inc. |
20.0%
|
4 | KANSAI SAW MFG. CO., LTD |
20.0%
|
Derivation Method
The ranking is calculated based on the click share within the chip saw page as of March 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
Country | Number of Companies | Share (%) |
---|---|---|
United States of America | 8 | 47.1% |
Japan | 3 | 17.6% |
China | 2 | 11.8% |
United Kingdom | 2 | 11.8% |
Germany | 1 | 5.9% |
Republic of Korea | 1 | 5.9% |
322 products are listed.
Japanese Corporation
Blade and Ibato-DX Chipsaw ■ Features ・ Completely embedded type and resistant to impact ・ Precision 4 -sided polishing and excellent sharpness ・ ...
Hagita Shokai
■ Characteristics ・ Because it is green fluorine coating, it is slippery and lightly cut. ・ Ultra -thin blade design decreases considerably. ・ E...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Long life with special hard chips. ・ Surface plating finish. ・ Both v...
Hagita Shokai
■ Characteristics ・ Because it is green fluorine coating, it is slippery and lightly cut. ・ Ultra -thin blade design decreases considerably. ・ E...
Hagita Shokai
■ Characteristics ・ It is a renovation chip saw. ・ By developing a special chip, the wood and small metal can be cut in various ways. ・ Work eff...
Hagita Shokai
■ Characteristics ・ Slide circle for general wood and glued lumber ・ It is a chip sew for tabletop round mushrooms. ・ It cuts straight without e...
Hagita Shokai
■ Characteristics ・ It is a chip saw for both iron and stainless steel. ・ It is a model that mainly focuses on cutting ironwork. ・ Super bass / ...
Hagita Shokai
10+ people viewing
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Super bass / low vibration with a silence laser finish. ・ Long life wi...
Hagita Shokai
20+ people viewing
Last viewed: 22 hours ago
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Long life with special hard chips. ・ Surface plating finish. ・ Both v...
Hagita Shokai
30+ people viewing
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ The silence laser slit absorbs noise and vibration. ・ Long life with h...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Super bass / low vibration with a silence laser finish. ・ Long life wi...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Super bass / low vibration with a silence laser finish. ・ Long life wi...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Super bass / low vibration with a silence laser finish. ・ Long life wi...
Hagita Shokai
■ Characteristics ・ It is a chip saw for aluminum (non -ferrous metal). ・ Excellent skin and sharpness. ・ Although it is an orthodox classic pro...
Hagita Shokai
■ Characteristics ・ Slide circle for general wood and glued lumber ・ It is a chip sew for tabletop round mushrooms. ・ It cuts straight without e...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Precision action. ・ Although it is an orthodox classic product, it is ...
Hagita Shokai
■ Characteristics ・ It is a chip saw with general wood and gypsum board. ・ Long life with special hard chips. ・ Although it is an orthodox class...
Hagita Shokai
■ Characteristics ・ It is a chip saw with general wood and gypsum board. ・ Long life with special hard chips. ・ Although it is an orthodox class...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Precision action. ・ Although it is an orthodox classic product, it is ...
Hagita Shokai
20+ people viewing
■ Characteristics ・ It is an all -diamond sew for hard ceramic siding. ・ A full -fledged professional specification using high -quality high hard...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Ideal for plywood. ・ Although it is an orthodox classic product, it is...
Hagita Shokai
■ Characteristics ・ It is an all -diamond sew for hard ceramic siding. ・ A full -fledged professional specification using high -quality high hard...
Hagita Shokai
■ Characteristics ・ It is a renovation chip saw. ・ By developing a special chip, the wood and small metal can be cut in various ways. ・ Work eff...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ The hard gypsum board is also lightly cut. ・ [Yoshino gypsum] Tiger Su...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Long life with special hard chips. ・ Green fluorine coating, slipping ...
Hagita Shokai
■ Characteristics ・ It is an all -diamond sew for hard ceramic siding. ・ A full -fledged professional specification using high -quality high hard...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Super bass / low vibration with a silence laser finish. ・ Long life wi...
Masudo Co., Ltd.
10+ people viewing
MIS-8000T1 type MIS-8000T1 suitable for making large products such as two percent, four-percent, and pillars without a prominent machine. The diffe...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Long life with special hard chips. ・ Surface plating finish. ・ Both v...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Precision action. ・ Although it is an orthodox classic product, it is ...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Ideal for vertical pulling. ・ Although it is an orthodox classic produ...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Super bass / low vibration with a silence laser finish. ・ Long life wi...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Long life with special hard chips. ・ Surface plating finish. ・ Both v...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Super bass / low vibration with a silence laser finish. ・ Long life wi...
Hagita Shokai
■ Characteristics ・ It is a renovation chip saw. ・ By developing a special chip, the wood and small metal can be cut in various ways. ・ Work eff...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Ideal for vertical pulling. ・ Although it is an orthodox classic produ...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Precision action. ・ Super bass / low vibration with a silence laser. ...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Precision action. ・ Super bass / low vibration with a silence laser. ...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ The hard gypsum board is also lightly cut. ・ Yoshino Plaster Tiger Sup...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Precision action. ・ Although it is an orthodox classic product, it is ...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Precision action. ・ Although it is an orthodox classic product, it is ...
Hagita Shokai
■ Overview It is an all -diamond sew for carbide ceramic siding. ■ Super long life type ・ In the durable test, it has been recorded more than 3 t...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Long life with special hard chips. ・ Surface plating finish. ・ Both v...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Long life with special hard chips. ・ Surface plating finish. ・ Both v...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Precision action. ・ Although it is an orthodox classic product, it is ...
Hagita Shokai
■ Characteristics ・ It is a chip saw for Garba board. ・ Horn waves and square span are also lightly disconnected. ・ Black foul coating. ・ Long ...
Hagita Shokai
■ Characteristics ・ It is a renovation chip saw. ・ By developing a special chip, the wood and small metal can be cut in various ways. ・ Work eff...
Hagita Shokai
■ Characteristics ・ Slide circle for general wood and glued lumber ・ It is a chip sew for tabletop round mushrooms. ・ It cuts straight without e...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Super bass / low vibration with a silence laser finish. ・ Long life wi...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Super bass / low vibration with a silence laser finish. ・ Long life wi...
Hagita Shokai
Last viewed: 22 hours ago
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Super bass / low vibration with a silence laser finish. ・ Long life wi...
Hagita Shokai
■ Characteristics ・ It is an all -diamond sew for hard ceramic siding. ・ A full -fledged professional specification using high -quality high hard...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Long life with special hard chips. ・ Surface plating finish. ・ For ve...
Hagita Shokai
20+ people viewing
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Long life with special hard chips. ・ Surface plating finish. ・ Both v...
Hagita Shokai
■ Characteristics ・ It is a carbide chip saw for ceramic siding. ・ Long life with ultra -high -hardness chips. ・ It is a universal chip saw that...
Hagita Shokai
■ Characteristics ・ It is a chip saw for general wood and glued lumber. ・ Super bass / low vibration with a silence laser finish. ・ Long life wi...
Hagita Shokai
■ Characteristics ・ It is a renovation chip saw. ・ By developing a special chip, the wood and small metal can be cut in various ways. ・ Work eff...
Hagita Shokai
■ Characteristics ・ It is an all -diamond sew for hard ceramic siding. ・ A full -fledged professional specification using high -quality high hard...
TOKYO DIAMOND TOOLS MFG.CO.,LTD.
A chip saw that uses a PCD on the edge of the blade, gives a better surface roughness than a carbide tool, and has several tens of times the life. ...
Hagita Shokai
■ Characteristics ・ It is an all -diamond sew for hard ceramic siding. ・ A full -fledged professional specification using high -quality high hard...
Hagita Shokai
■ Characteristics ・ It is an all -diamond sew for hard ceramic siding. ・ A full -fledged professional specification using high -quality high hard...
Hagita Shokai
■ Characteristics ・ It is an all -diamond sew for hard ceramic siding. ・ A full -fledged professional specification using high -quality high hard...
Hagita Shokai
■ Characteristics ・ It is a renovation chip saw. ・ By developing a special chip, the wood and small metal can be cut in various ways. ・ Work eff...
Hagita Shokai
■ Characteristics ・ It is a renovation chip saw. ・ By developing a special chip, the wood and small metal can be cut in various ways. ・ Work eff...
Hagita Shokai
■ Characteristics ・ It is a renovation chip saw. ・ By developing a special chip, the wood and small metal can be cut in various ways. ・ Work eff...
Hagita Shokai
■ Overview It is an all -diamond sew for carbide ceramic siding. ■ Super long life type ・ In the durable test, we have recorded more than twice a...
Hagita Shokai
■ Characteristics ・ It is a renovation chip saw. ・ By developing a special chip, the wood and small metal can be cut in various ways. ・ Work eff...
YSK Industry Co., Ltd.
40+ people viewing
■ Characteristics ・ Quiet cutting with a silence laser. ・ Long life with a Newser Met chip with a blessing. (Twice as long as other companies' pr...
YSK Industry Co., Ltd.
30+ people viewing
■ Characteristics ・ Super bass / low vibration with laser finish. ・ Slip and lightly cut with fluorine coating. ・ Long life with special hard ch...
Hagita Shokai
■ Characteristics ・ As a stainless steel chip saw, it is a very light cutting with an unprecedented ultra -thin blade. ・ Special blade type, spec...
Hagita Shokai
■ Characteristics ・ As a stainless steel chip saw, it is a very light cutting with an unprecedented ultra -thin blade. ・ Special blade type, spec...
YSK Industry Co., Ltd.
40+ people viewing
There are other model numbers.
YSK Industry Co., Ltd.
■ Characteristics ・ Surface fluorine coating ・ Low dust and can be cut lightly. ・ A special tooth type that does not bend even with an ultra -th...
Hagita Shokai
■ Characteristics ・ This product is not a genuine Triton product. ・ 16mm/25mm hole diameter conversion washer (sleeve) is also sold separately. P...
YSK Industry Co., Ltd.
10+ people viewing
There are other model numbers.
Hagita Shokai
■ Characteristics ・ As a stainless steel chip saw, it is a very light cutting with an unprecedented ultra -thin blade. ・ Special blade type, spec...
YSK Industry Co., Ltd.
10+ people viewing
■ Characteristics ・ Inequal interval pitch blade realizes the lightness of a new sense. ・ Super bass / low vibration with laser finish. ・ Slip a...
YSK Industry Co., Ltd.
10+ people viewing
■ Characteristics ・ Cutting effect of 60P or more even with 30P wings. ・ Special development, R -shaped chip is used. ・ A beautiful cutting surf...
YSK Industry Co., Ltd.
10+ people viewing
Last viewed: 18 hours ago
Hagita Shokai
■ Characteristics ・ As a stainless steel chip saw, it is a very light cutting with an unprecedented ultra -thin blade. ・ Special blade type, spec...
YSK Industry Co., Ltd.
20+ people viewing
■ Characteristics ・ Various materials can be cut by developing special chips. ・ The silence effect leads to improvement of work efficiency. ・ Id...
Hagita Shokai
■ Characteristics ・ It is a chip saw for panel saw. ・ Long life with special hard chips. ・ A beautiful cutting surface. ・ The stacking is also ...
Hagita Shokai
■ Characteristics ・ This product is not a genuine Triton product. ・ Includes 16mm/25mm hole diameter conversion washer (sleeve). (5 pieces) ・ Au...
Hagita Shokai
■ Characteristics ・ It is a chip saw for both iron and stainless steel. ・ It is a model that mainly focuses on cutting ironwork. ・ Super bass / ...
YSK Industry Co., Ltd.
■ Characteristics ・ Less resistance due to ultra -thin blade with a blade thickness of 1.6 mm. ・ Because it is laser slit, low noise and low vibr...
Hagita Shokai
■ Characteristics ・ It is a chip saw for both iron and stainless steel. ・ It is a model that mainly focuses on cutting ironwork. ・ Super bass / ...
YSK Industry Co., Ltd.
■ Characteristics ・ Because there are few distortions, there are few burrs. ・ Long life is strong against impact due to a special chip containing...
Hagita Shokai
■ Characteristics ・ This product is not a genuine Triton product. ・ 16mm/25mm hole diameter conversion washer (sleeve) is also sold separately. P...
YSK Industry Co., Ltd.
■ Characteristics ・ Super bass / low vibration with laser finish. ・ Slip and lightly cut with fluorine coating. ・ Long life with special hard ch...
YSK Industry Co., Ltd.
■ Characteristics ・ Prevention of removal of chips by embedded type. ・ The edge can be cut lightly with a special R type. ・ Working efficiency i...
YSK Industry Co., Ltd.
■ Characteristics ・ Super bass / low vibration with laser finish. ・ Slip and lightly cut with fluorine coating. ・ Long life with special hard ch...
YSK Industry Co., Ltd.
■ Characteristics ・ Super bass / low vibration with laser finish. ・ Slip and lightly cut with fluorine coating. ・ Long life with special hard ch...
YSK Industry Co., Ltd.
There are other model numbers.
YSK Industry Co., Ltd.
■ Characteristics ・ 4: 1 Right, left, right, left, left, core blade (5 pairs) ・ Easy to cut, do not bend. ・ Quiet cutting with a silence laser. ...
Hagita Shokai
■ Characteristics ・ It is a chip saw for mowing and mowing. ・ Because the body is mesh, it is super lightweight. ・ Because it is a chip embedded...
YSK Industry Co., Ltd.
■ Characteristics ・ Long life with a special chip with titanium. ・ Stir -flour is stirred with a special shape. ■ Use Chip sew for ceramic sidin...
YSK Industry Co., Ltd.
■ Characteristics ・ Inequal interval pitch blade realizes the lightness of a new sense. ・ Super bass / low vibration with laser finish. ・ Slip a...
Hagita Shokai
■ Characteristics ・ It is a chip saw for both iron and stainless steel. ・ It is a model that mainly focuses on cutting ironwork. ・ Super bass / ...
Nakajima Machine Co., Ltd.
It is a joint planning product between the Agricultural Machinery Commercial Cooperative and Tsumura in Fukui Prefecture, famous for dinosaurs. Spe...
Hagita Shokai
■ Characteristics ・ As a stainless steel chip saw, it is a very light cutting with an unprecedented ultra -thin blade. ・ Special blade type, spec...
Hagita Shokai
■ Characteristics ・ It is a chip saw for bamboo cutting. ・ Long life with special hard chips. ・ A beautiful cutting surface. ・ Surface plating ...