12 Parting Agent Manufacturers in 2024
This section provides an overview for parting agents as well as their applications and principles. Also, please take a look at the list of 12 parting agent manufacturers and their company rankings. Here are the top-ranked parting agent companies as of November, 2024: 1.Hill & Griffith Co., 2.Smooth-On, Inc., 3.Slide Products, Inc..
Table of Contents
What Is a Parting Agent?
Parting agents facilitate the removal of old paint, coatings, resins, and adhesives from metal, glass, and plastic surfaces. Traditionally, methylene chloride-based agents were common, but there has been a shift towards environmentally friendly, non-chlorinated alternatives.
Uses of Parting Agents
They are essential in preventing uneven painting, peeling, and cracking when applying new coatings. Choices between water-based, solvent-based, and methylene chloride-based agents depend on material compatibility, the extent of removal, and the process involved. Given its harmful effects on health and the environment, methylene chloride requires careful handling.
Principle of Parting Agents
Parting agents alter the adhesion properties of coatings, facilitating their removal. The effectiveness varies with the solvent type:
1. Methylene Chloride Type
Characterized by its high permeability, this type softens paint films for removal, especially useful for steel surfaces prone to rust. Available in neutral, acidic, and alkaline variants, it complies with industrial safety and environmental regulations.
2. Non-chlorinated Type
These agents dissolve and remove the coating. While suitable for removing cured adhesives and resin-based films, their pungent odor and high viscosity make them less ideal for detailed cleaning and slow to dry. They are also regulated under fire safety laws.
Other Information on Parting Agents
1. How to Use Parting Agents
Immersion: Submerge the coated material in a tank filled with a parting agent for comprehensive removal. Techniques like electro-stripping can speed up the process, though the solution requires periodic renewal to remove impurities.
Spray Application: Spraying the agent can be uneven and risks contaminating unintended areas. Automation helps, but the manual application still presents challenges.
Direct Application: Brush application allows for selective and economical use, requiring minimal quantities.
2. Application in the Medical Field
In medical contexts, parting agents assist in managing prosthetics like artificial anus or bladder devices, ensuring a tight seal against the skin to prevent odor leakage. These medical-grade agents prioritize ingredients that are gentle on the skin, offering options from odorless to scented varieties. Their formulation, often silicone-based and sometimes alcohol-free, minimizes skin irritation. Designed for convenience and ease of use, they cater to both individual and caregiver needs, emphasizing functionality and portability.
List of 12 Parting Agent Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Japan
-
-
-
Smooth-On, Inc.
Release Agents
Manufacturer Overview
Smooth-On, Inc. is a manufacturer of materials for various applications including molds and industrial parts. The company was established in 1895 and is now located in Macungie, Pennsylvania, United States. Smooth-On manufactures materials including rigid and flexible urethane foams, silicone rubbers, and coating and release agents. The company's products are used in various applications including sculpture and art casting, candle making, and architectural restoration. The company also offers training on basic and advanced molding and casting techniques at their facility.
-
-
-
-
-
Slide Products, Inc.
Mold Releases
Manufacturer Overview
Slide Products, Inc., is based in Wheeling, Illinois, United States, and specializes in providing solutions for plastic processing and mold-making problems since 1953. Slide offers cleaners, specialized mold releases, high-temperature grease, and purging compounds to various customers including injection molders, extruders, and blow molders. The company also provides contract filling and packaging services to other aerosol and liquid product manufacturers for degreasers, brake cleaners, silicone sprays, as well as penetrating oils.
-
-
-
-
-
General Chemical Corp.
Cold Box Mold Release Agents
Manufacturer Overview
General Chemical Corporation, established in 1980, is a manufacturer and supplier of specialty chemicals, based in the United States. The company core products include water treatment chemicals, fuel additives, and industrial cleaning solutions, serving diverse industries such as water treatment, oil and gas, and food processing. It began by supplying soldering fluxes to radiator plants and expanded our product line to include lubricants, cleaners, paint strippers, and more. Its strengths lie in providing tailored chemical solutions, optimizing industrial processes, and ensuring environmental compliance. Based on its customer need survey and research, it provides a solution for each customer specific manufacturing process.
-
-
-
-
-
Hill & Griffith Co.
SHELL RELEASE AGENTS
Manufacturer Overview
Hill & Griffith Co., established in 1896, is a manufacturer and supplier of die casting, foundry, concrete, metalworking, and hydraulic fluids, based in the United States. The company has been serving the metalcasting and manufacturing operations for over 125 years. It offers a wide range of products for core room or molding department operations, and superior release agents. It also provides custom packaging and custom liquid blending services. It continues to make substantial investments in research and development to ensure new technologies and quality supplies are being developed to support its customers’ needs, industry trends and compliance with environmental regulations.
-
-
-
-
-
Momentive Performance Materials Inc.
Mold Release Agents
Manufacturer Overview
Momentive Performance Materials Inc. (MPM) is an American manufacturer of silicones and specialty solutions established as a subsidiary of MOM Holding Company in 2019. Based in Niskayuna, New York, the company produces various silicones and silicone derivative products such as adhesives, cosmetic additives, hardcoats, and mold release agents. These are used by clients in a wide range of industries, including the automotive, renewable energy, packaging, and beauty industries. MPM operates globally, with over 50 manufacturing and commercial locations across North and South America, Europe, Africa, and Asia.
-
-
-
-
-
Dow Corporate
Industrial Mold Release Agents
Company Overview
Dow Inc. was originally incorporated in 1897 and is headquartered in Midland, Michigan. The company is a manufacturer and distributor of numerous advanced materials and chemicals used in packaging, infrastructure, and consumer industries by other companies around the world. The company’s product divisions include Packaging & Specialty Plastics, Industrial Intermediates & Infrastructure, and Performance Materials & Coatings. Packaging & Specialty Plastics include ethylene, rubbers, and wire and cable products. Industrial Intermediates & Infrastructure include ethanol amines, adhesives, sealants, and other composites. Performance Materials and Coatings provides paints and industrial coatings for metal packing.
-
-
-
-
-
Buehler
Mold Release Agents
Distributor Overview
Buehler, operational since 1936, located in 6 countries with main offices in Lake Bluff, Illinois, is a supplier of instruments for metallographic sampling, preparation and analysis. The line of products is segmented into mounting, etching, hardness testing, sectioning, and cutting equipment such as abrasive cutters, etchers, microscopes, testers, and cold mounters used in the automotive, defense, aerospace, medical, and electronics industries. The company is ISO 9001 and ISO 14001 certified with an A2LA certification indicating that the company meets all standards for calibrations on measurement equipment.
-
-
-
-
-
SANKYO CHEMICAL CO.,LTD.
Repairsolve S
Manufacturer Overview
Sankyo Chemical Co. LTD., established in 1957 and headquartered in Nagoya, Japan, is a manufacturer of several intermediate materials, including paints, industrial cleaning agents, thinners, organic industrial chemicals, and adhesives. The products can be used in several areas, including silk screen printing, wiping off resin, washing agents for flux, metal processing, and mold forming. The company accepts contract manufacturing and provides several environmentally friendly products that comply with ISO 14001, the Industrial Safety and Health Law, and the PRTR (Pollutant Release and Transfer Register) Law.
-
-
-
-
-
Nox-Crete Products Group
Biodegradable Release Agents
-
-
-
-
-
Mitsubishi Gas Chemical Trading, Inc.
Stripper Solutions for Solder and Nickel plating
Company Overview
Mitsubishi Gas Chemical Trading, Inc. (MGCT) is a distributor of electronics manufacturing materials, chemicals, and engineering plastics established in Tokyo in 2018 as a subsidiary of Mitsubishi Gas Chemical Company, Inc. (MGCC). The company primarily stocks various electronics manufacturing materials such as conductive pastes and solder-resistant inks for smartphones or PCBs, basic chemicals like methanol and ammonia for creating synthetic resins or fibers, and engineering plastics, sheets and films for molding. These supply MGCT's buy-and-sell operations that serve client manufacturers in the food and beverage, petrochemical, pharmaceutical and consumer electronics industries.
-
-
-
-
-
-
-
Midvale Industries, Inc
Parting Agents
Distributor Overview
Midvale Industries was founded in 1901 in East Saint Louis, Illinois. Midvale Industries sells its mined and manufactured products. Midvale Industries provides process solutions for many industrial applications, including Aerospace, Metalcasting, Metal Finishing, Parts Washing, and Industrial Coating. The company is a nationwide distributor serving customers' projects such as coating removal on composites in the aerospace industry and consulting on the production of castings. Beyond sales, Midvale Industries shows customers how to use products and equipment safely and efficiently.
-
-
Parting Agent Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Hill & Griffith Co. |
20.0%
|
| 2 | Smooth-On, Inc. |
20.0%
|
| 3 | Slide Products, Inc. |
20.0%
|
| 4 | Buehler |
20.0%
|
| 5 | Shimizu Co., Ltd. |
20.0%
|
Derivation Method
The ranking is calculated based on the click share within the parting agent page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Mitsubishi Gas Chemical Trading, Inc.: 444
- Shimizu Co., Ltd.: 50
Newly Established Company
- Mitsubishi Gas Chemical Trading, Inc.: 2018 (6 years ago)
- SANKYO CHEMICAL CO.,LTD.: 1957 (67 years ago)
- Slide Products, Inc.: 1953 (71 years ago)
Company with a History
- Smooth-On, Inc.: 1895 (129 years ago)
- Hill & Griffith Co.: 1896 (128 years ago)
- Shimizu Co., Ltd.: 1949 (75 years ago)
Parting Agent Manufacturers in United States
*Including some distributors, etc.
- Smooth-On, Inc.
- Slide Products, Inc.
- General Chemical Corp.
- Hill & Griffith Co.
- Momentive Performance Materials Inc.
- Dow Corporate
- Buehler
Global Distribution of Parting Agent Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
7 | 70.0% |
Japan
|
3 | 30.0% |
List of Parting Agent Products
24 products are listed.
Nissin Industry Co., Ltd.
Environmentally friendly & non -chlorine steel pipe float
20+ people viewing
■ Savior of steel pipe with varnish ・ Metal is not corroded with environmentally friendly non -chlorine peeling agents. ・ You can safely peel off...
A -Kay Corporation Co., Ltd.
Cleaning agent and peeling agent Chemizol
20+ people viewing
It is a cleaning agent suitable for various applications. To select a cleaning and release agent, be sure to perform a preliminary test to select t...
A -Kay Corporation Co., Ltd.
Cleaning agent and peeling agent chemi cleaner
10+ people viewing
It is a cleaning agent suitable for various applications. To select a cleaning and release agent, be sure to perform a preliminary test to select t...
TAIYO CHEMICALS & ENGINEERING CO.,LTD.
Cleaning and removal cleaning agent for hard oils and fat stains and grease and tar.
20+ people viewing
Sun -Ekon's "cleaning agent" is cleaned and removed for hard oil stains that are usually difficult to remove, grease and tar -like dirt.
