TOCHIGIYA CO.,LTD.'s Recessed Handles

■Notes Please specify the L dimension. This is used in combination with a fastener and rod guide. Please refer to TEO-1107-U6 for the fastener. Min...

• Tools

• Recessed Handles

■Features Soft, leather-like handle. ■Applications Measuring instruments, trunk cases, etc. *Custom orders are welcome.

• Tools

• Recessed Handles

■Features Pulling up the handle retracts the latch, allowing the door to be opened and closed by rotating the handle. Pushing the handle down locks...

• Tools

• Recessed Handles

■Features This is an L-shaped handle that can be used on both the left and right sides. ■Applications Distribution boards, switchboards, etc. *Cu...

• Tools

• Recessed Handles

■Features The melamine coating gives the handle a high-quality feel. It can be installed from either the outside or the inside. The mounting surfac...

• Tools

• Recessed Handles

■Features This handle can be easily installed by simply drilling mounting holes. ■Applications Rear panels, front panels, interior panels, inspect...

• Tools

• Recessed Handles

■Features Handle with minimal protrusion from the door surface. Equipped with a detent mechanism. ■Applications Small distribution boards, switchb...

• Tools

• Recessed Handles

■Features Made of brass, available in two types: male thread and female thread. ■Applications Doors for small boxes, doors for small equipment, et...

• Tools

• Recessed Handles

■Features This handle protrudes minimally from the mounting surface (approximately 2mm). Two types of mounting brackets are available. ■Applicatio...

• Tools

• Recessed Handles

■Features This handle protrudes minimally from the mounting surface (approximately 2mm). Two types of mounting brackets are available. ■Applicatio...

• Tools

• Recessed Handles

■Angle Handle These are parts primarily used as pull handles, made from aluminum extruded material cut to a specified length. We can also cut them ...

• Tools

• Recessed Handles

■Features This is a stopper for handles. ■Applications Various handles *Custom orders are accepted.

• Tools

• Recessed Handles

■Features A compact stand handle. ■Applications Measuring instruments, audio equipment, various testing equipment, etc. *Custom orders are welcome.

• Tools

• Recessed Handles

■Applications Measuring instruments, audio equipment, office automation equipment, etc. *Custom orders are welcome.

• Tools

• Recessed Handles

■Features The arm hooks onto the fixed receiving part and is tightened to lock it in place. The spring-loaded arm is vibration-resistant and provid...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features This handle is designed to be as thin as possible on the panel surface. Other colors are also available (custom orders accepted). ■Appli...

• Tools

• Recessed Handles

■Features These handles have a sleek, hairline finish. The generous depth allows for easy handling. ■Applications Racks, chassis, storage cabinets...

• Tools

• Recessed Handles

■Features A highly versatile size has been made available as a standard product for use as a door lock for boxes. Assembly with fasteners is also a...

• Tools

• Recessed Handles

■Features: A stainless steel rotating handle with a subdued, understated finish. ■Applications: Food processing, ships, vehicles, construction, me...

• Tools

• Recessed Handles

■Features A handle with a sophisticated, high-quality feel in a monochrome color scheme. ■Applications Office equipment, office machinery, audio e...

• Tools

• Recessed Handles

■Features A handle with a sophisticated, high-quality feel in a monochrome color scheme. ■Applications Office equipment, office machinery, audio e...

• Tools

• Recessed Handles

■Applications Office equipment, office machinery, home appliances, audio equipment, and others

• Tools

• Recessed Handles

■Features This is a push-in type resin handle that simplifies installation. It's a product that beautifully harmonizes a mechanical design with the...

• Tools

• Recessed Handles

■Features Sizes can be selected according to the installation location. ■Applications Various handles *Custom orders are accepted.

• Tools

• Recessed Handles

■Features The release button (push button) is located on the top of the product, reducing the risk of the handle springing up and causing contact w...

• Tools

• Recessed Handles

■Features The release button (push button) is located on the top of the product, reducing the risk of the handle springing up and accidentally touc...

• Tools

• Recessed Handles

■Features The door opens with a single touch by pulling the lever and closes by pushing the door. Furthermore, the lever remains raised when the la...

• Tools

• Recessed Handles

■Features The door opens with a single touch by pulling the lever and closes by pushing the door. Furthermore, the lever remains raised when the la...

• Tools

• Recessed Handles

■Features The door opens with a single touch by pulling the lever and closes by pushing the door. Furthermore, the lever remains raised when the la...

• Tools

• Recessed Handles

■Features The door opens with a single touch by pulling the lever and closes by pushing the door. Furthermore, the lever remains raised when the la...

• Tools

• Recessed Handles

■Features The door opens with a single touch by pulling the lever and closes by pushing the door. Furthermore, the lever remains raised when the la...

• Tools

• Recessed Handles

■Features The door opens with a single touch by pulling the lever and closes by pushing the door. Furthermore, the lever remains raised when the la...

• Tools

• Recessed Handles

■Features The door opens with a single touch by pulling the lever and closes by pushing the door. Furthermore, the lever remains raised when the la...

• Tools

• Recessed Handles

■Features The door opens with a single touch by pulling the lever and closes by pushing the door. Furthermore, the lever remains raised when the la...

• Tools

• Recessed Handles

■Features This is a 3P latching system product. The flat latch (THA-282) incorporates a linkage mechanism, and when combined with the latch lock (T...

• Tools

• Recessed Handles

■Features This is a 3P latching system product. The flat latch (THA-282) incorporates a linkage mechanism, and when combined with the latch lock (T...

• Tools

• Recessed Handles

■Features This is a 3P latching system product. The flat latch (THA-282) incorporates a linkage mechanism, and when combined with the latch lock (T...

• Tools

• Recessed Handles

■Features This product should be used in conjunction with an inner lock (THA-295) and a cam, etc. Its flat design provides a high level of safety. ...

• Tools

• Recessed Handles

■Features This product should be used in conjunction with an inner lock (THA-295) and a cam, etc. Its flat design provides a high level of safety. ...

• Tools

• Recessed Handles

■Features The release button (push button) is located on the top of the product, reducing the risk of the handle springing up and contact with the ...

• Tools

• Recessed Handles

■Features The release button (push button) is located on the top of the product, reducing the risk of the handle springing up and contact with the ...

• Tools

• Recessed Handles

■Features This is an interior handle for doors on construction machinery (operator cabs), etc. Simply pull up the lever to unlock and open the door...

• Tools

• Recessed Handles

■Features This handle features a two-stage lifting mechanism to prevent sudden movement and improve safety. ■Applications Distribution boards, swi...

• Tools

• Recessed Handles

■Features This handle features a two-stage lifting mechanism to prevent sudden protrusion, improving safety. ■Applications Distribution boards, sw...

• Tools

• Recessed Handles

■Features This handle features a two-stage lifting mechanism to prevent sudden protrusion, improving safety. ■Applications Distribution boards, sw...

• Tools

• Recessed Handles

■Features This handle features a two-stage lifting mechanism to prevent sudden protrusion, improving safety. ■Applications Distribution boards, sw...

• Tools

• Recessed Handles

■Features This handle features a two-stage lifting mechanism to prevent sudden protrusion, improving safety. ■Applications Distribution boards, sw...

• Tools

• Recessed Handles

■Features This handle features a two-stage lifting mechanism to prevent sudden protrusion, improving safety. ■Applications Distribution boards, sw...

• Tools

• Recessed Handles

Registered product of the Japan Distribution and Control Systems Industry Association, Emergency Distribution Panel Certification Committee (Fire-r...

• Tools

• Recessed Handles

■Features When not in use, the handle retracts into the main body, resulting in a flat surface. ■Applications Measuring instruments, communication...

• Tools

• Recessed Handles

SEMI Standard: S8-0701 Compliant ■Features This is a stainless steel recessed handle that conforms to the SEMI standard (four-finger grip type hand...

• Tools

• Recessed Handles

SEMI Standard: S8-0701 Compliant ■Features This is a stainless steel recessed handle that conforms to the SEMI standard (four-finger type handle)....

• Tools

• Recessed Handles

■Features This is a stainless steel recessed handle that conforms to SEMI standards (four-finger grip type handle). ■Applications Kitchen equipmen...

• Tools

• Recessed Handles

SEMI Standard: S8-0701 Compliant ■Features This is a stainless steel recessed handle that conforms to the SEMI standard (four-finger type handle)....

• Tools

• Recessed Handles

■Features Available in various sizes to suit different equipment. ■Applications Measuring instruments, communication equipment, etc. *Custom orde...

• Tools

• Recessed Handles

■Features The angled design makes it easy to grip. It can also be used as a guard for equipment. ■Applications Measuring instruments, communicatio...

• Tools

• Recessed Handles

■Features A leaf spring is used in the handle. ■Applications Measuring instruments, communication equipment, etc.

• Tools

• Recessed Handles

■Features This recessed handle can be installed simply by pushing it in from the front using a latch mechanism. It conforms to SEMI standards (four...

• Tools

• Recessed Handles

■Features A simple, recessed stainless steel handle. ■Applications Kitchen equipment, measuring instruments, medical equipment, etc.

• Tools

• Recessed Handles

■Features This pop-up flat handle solves the problem of poor handle operation caused by resistance from the retaining clip, which was a problem wit...

• Tools

• Recessed Handles

■Features This pop-up flat handle solves the problem of poor handle operation caused by resistance from the retaining clip, which was a problem wit...

• Tools

• Recessed Handles

■Features This pop-up flat handle solves the problem of poor handle operation caused by resistance from the retaining clip, which was a problem wit...

• Tools

• Recessed Handles

■Features This pop-up flat handle solves the problem of poor handle operation caused by resistance from the retaining clip, which was a problem wit...

• Tools

• Recessed Handles

■Features This pop-up flat handle solves the problem of poor handle operation caused by resistance from the retaining clip, which was a problem wit...

• Tools

• Recessed Handles

■Features This pop-up flat handle solves the problem of poor handle operation caused by resistance from the retaining clip, which was a problem wit...

• Tools

• Recessed Handles

■Features This pop-up flat handle solves the problem of poor handle operation caused by resistance from the retaining clip, which was a problem wit...

• Tools

• Recessed Handles

■Features This pop-up flat handle solves the problem of poor handle operation caused by resistance from the retaining clip, which was a problem wit...

• Tools

• Recessed Handles

■Features This pop-up flat handle solves the problem of poor handle operation caused by resistance from the retaining clip, which was a problem wit...

• Tools

• Recessed Handles

■Features This pop-up flat handle solves the problem of poor handle operation caused by resistance from the retaining clip, which was a problem wit...

• Tools

• Recessed Handles

■Features This pop-up flat handle solves the problem of poor handle operation caused by resistance from the retaining clip, which was a problem wit...

• Tools

• Recessed Handles

■Features This pop-up flat handle solves the problem of poor handle operation caused by resistance from the retaining clip, which was a problem wit...

• Tools

• Recessed Handles

■Features This is a flat handle with a lift mechanism that pulls the locking mechanism in when the handle is retracted. Because it tightens the doo...

• Tools

• Recessed Handles

■Features This is a flat handle with a lift mechanism that pulls the locking mechanism in when the handle is retracted. Because it tightens the doo...

• Tools

• Recessed Handles

■Features This is a flat handle with a lift mechanism that pulls the locking mechanism in when the handle is retracted. Because it tightens the doo...

• Tools

• Recessed Handles

■Features This is a flat handle with a lift mechanism that pulls the locking mechanism in when the handle is retracted. Because it tightens the doo...

• Tools

• Recessed Handles

■Features This is a rainproof handle with a thin design from the mounting surface to the fastening bracket. The handle has a two-stage lifting mech...

• Tools

• Recessed Handles

■Features This is a rainproof handle with a thin design from the mounting surface to the fastening bracket. The handle has a two-stage lifting mech...

• Tools

• Recessed Handles

■Features This is a rainproof handle with a thin design from the mounting surface to the fastening bracket. The handle has a two-stage lifting mech...

• Tools

• Recessed Handles

■Features Complies with SEMI standard SEMIS8-0218 (SEC6.9.1) "Finger-pull type handle (4 fingers)" (THA-425-1, THA-425-1N). Recessed stainless stee...

• Tools

• Recessed Handles

■Features Complies with SEMI standard SEMIS8-0218 (SEC6.9.1) "Finger-pull type handle (4 fingers)" (THA-425-1, THA-425-1N). Recessed stainless stee...

• Tools

• Recessed Handles

■Features Complies with SEMI standard SEMIS8-0218 (SEC6.9.1) "Finger-pull type handle (4 fingers)" (THA-425-1, THA-425-1N). Recessed stainless stee...

• Tools

• Recessed Handles

■Features Complies with SEMI standard SEMIS8-0218 (SEC6.9.1) "Finger-pull type handle (4 fingers)" (THA-425-1, THA-425-1N). Recessed stainless stee...

• Tools

• Recessed Handles

■Features Complies with SEMI standard SEMIS8-0218 (SEC6.9.1) "Finger-pull type handle (4 fingers)" (THA-425-1, THA-425-1N). Recessed stainless stee...

• Tools

• Recessed Handles

■Features Complies with SEMI standard SEMIS8-0218 (SEC6.9.1) "Finger-pull type handle (4 fingers)" (THA-425-1, THA-425-1N). Recessed stainless stee...

• Tools

• Recessed Handles

■Features Opening and closing the door is a one-touch operation: simply pull the handle to open and push the door to close. When the latch is not f...

• Tools

• Recessed Handles

■Features Two-point locking is possible using a rod. It's a flush-type flat latch with minimal protrusion from the mounting surface. By using it in...

• Tools

• Recessed Handles

■Features This is a flat latch that allows for 3-point locking by using a rod. It is a 3P version of the conventional product (THA-429). The latch ...

• Tools

• Recessed Handles

■Features Two-point locking is possible using a rod. It's a flush-type flat latch with minimal protrusion from the mounting surface. By using it in...

• Tools

• Recessed Handles

■Features Opening and closing the door is a one-touch operation: simply pull the handle to open and push the door to close. When the latch is not f...

• Tools

• Recessed Handles

■Features Two-point locking is possible using a rod. It's a flush-type flat latch with minimal protrusion from the mounting surface. By using it in...

• Tools

• Recessed Handles

■Features Made of stainless steel, this is part of the THA-429 series. Installation can be done without disassembling the main unit. ■Applications...

• Tools

• Recessed Handles

■Features Made of stainless steel, this is part of the THA-429 series. Installation can be done without disassembling the main unit. ■Applications...

• Tools

• Recessed Handles

■Features This is a flat-type latch with minimal protrusion from the mounting surface. The latch mechanism allows you to close the door simply by p...

• Tools

• Recessed Handles

■Features This is a flat-type latch with minimal protrusion from the mounting surface. The latch mechanism allows you to close the door simply by p...

• Tools

• Recessed Handles

■Features This is a flat-type latch with minimal protrusion from the mounting surface. The latch mechanism allows you to close the door simply by p...

• Tools

• Recessed Handles

■Features This is a flat-type latch with minimal protrusion from the mounting surface. The latch mechanism allows you to close the door simply by p...

• Tools

• Recessed Handles

■Features This is a flat-type latch with minimal protrusion from the mounting surface. The latch mechanism allows you to close the door simply by p...

• Tools

• Recessed Handles

■Features This is a flat handle with a lift mechanism that pulls the locking bracket in when the handle is retracted. Its shallow depth from the mo...

• Tools

• Recessed Handles

■Features This is a flat handle with a lift mechanism that pulls the locking bracket in when the handle is retracted. Its shallow depth from the mo...

• Tools

• Recessed Handles

■Features This is a flat handle with a lift mechanism that pulls the locking bracket in when the handle is retracted. Its shallow depth from the mo...

• Tools

• Recessed Handles

■Features It employs a lift mechanism where the locking mechanism is pulled in when the handle is retracted. This tightens the door, eliminating ra...

• Tools

• Recessed Handles

■Features This is a latch-type, flat handle. Closing the door is as simple as pushing it in, and opening it is as simple as pulling up the handle. ...

• Tools

• Recessed Handles

■Features This is a latch-type, flat handle. Closing the door is as simple as pushing it in, and opening it is as simple as pulling up the handle. ...

• Tools

• Recessed Handles

■Features This is a resin recessed handle that conforms to SEMI standard S8-0218 (Section 6.9.1) "Finger-pull type handle (4 fingers)". It is a sna...

• Tools

• Recessed Handles

■Features This is a resin recessed handle that conforms to SEMI standard S8-0218 (Section 6.9.1) "Finger-pull type handle (4 fingers)". It is a sna...

• Tools

• Recessed Handles

■Features Complies with SEMI standard S8-0218 (Section 6.7.1) "Handle-type handle". The mounting bracket and screws are integrated, making installa...

• Tools

• Recessed Handles

■Features This is a small, recessed resin handle that conforms to SEMI standard S8-0218 (Section 6.9.1) "Finger-pull type handle (4 fingers)". It f...

• Tools

• Recessed Handles

■Features This is a small, recessed resin handle that conforms to SEMI standard S8-0218 (Section 6.9.1) "Finger-pull type handle (4 fingers)". It f...

• Tools

• Recessed Handles

■Features This is a resin recessed handle that conforms to SEMI standard SEMIS8-0218 (Section 6.8.1) "Hook-grip handle". It features a snap-in desi...

• Tools

• Recessed Handles

■Features This is a resin recessed handle that conforms to SEMI standard SEMIS8-0218 (Section 6.8.1) "Hook-grip handle". It features a snap-in desi...

• Tools

• Recessed Handles

■Features This is a resin recessed handle that conforms to SEMI standard SEMIS8-0218 (Section 6.8.1) "Hook-grip handle". It features a snap-in desi...

• Tools

• Recessed Handles

■Features This is a resin recessed handle that conforms to SEMI standard SEMIS8-0218 (Section 6.8.1) "Hook-grip handle". It features a snap-in desi...

• Tools

• Recessed Handles

■ Overview Large stainless steel recessed handle. Complies with SEMI standard: S8-0218 (Section 6.8.1). ■ Features This is a stainless steel reces...

• Tools

• Recessed Handles

■Features Space-saving design with a small opening just the width of one finger. Designed to minimize protrusion from the panel surface. One-touch ...

• Tools

• Recessed Handles

■Features This type can be mounted from the front of panels, etc. The angled design makes it easier to grip. ■Applications Measuring instruments, ...

• Tools

• Recessed Handles

■Features This is a cylinder lock type handle. It eliminates the difficulty of operation caused by the resistance of the retaining clip and adds wa...

• Tools

• Recessed Handles

■Features This is a cylinder lock type handle. It eliminates the difficulty of operation caused by the resistance of the retaining clip and adds wa...

• Tools

• Recessed Handles

■Features This is a cylinder lock type handle. It eliminates the difficulty of operation caused by the resistance of the retaining clip and adds wa...

• Tools

• Recessed Handles

■Features This is a cylinder lock type handle. It eliminates the difficulty of operation caused by the resistance of the retaining clip and adds wa...

• Tools

• Recessed Handles

■Features This is a cylinder lock type handle. It eliminates the difficulty of operation caused by the resistance of the retaining clip and adds wa...

• Tools

• Recessed Handles

■Features This is a cylinder lock type handle. It eliminates the difficulty of operation caused by the resistance of the retaining clip and adds wa...

• Tools

• Recessed Handles

■Features This is a flat handle that is pulled up with your fingertips. It has compatible mounting holes with the THA-408AN and THA-505 series, etc...

• Tools

• Recessed Handles

■Features This is a flat handle that is pulled up with your fingertips. It has compatible mounting holes with the THA-408AN and THA-505 series, etc...

2 models listed

• Tools

• Recessed Handles

■Features This is a flat handle that is pulled up with your fingertips. It has compatible mounting holes with the THA-408AN and THA-505 series, etc...

• Tools

• Recessed Handles

■Features This is a flat handle that is pulled up with your fingertips. It has compatible mounting holes with the THA-408AN and THA-505 series, etc...

2 models listed

• Tools

• Recessed Handles

■Features This is a flat handle that is pulled up with your fingertips. It has compatible mounting holes with the THA-408AN and THA-505 series, etc...

• Tools

• Recessed Handles

■Features This is a flat handle that is pulled up with your fingertips. It has compatible mounting holes with the THA-408AN and THA-505 series, etc...

2 models listed

• Tools

• Recessed Handles

■Features This is a flat handle that is pulled up with your fingertips. It has compatible mounting holes with the THA-408AN and THA-505 series, etc...

• Tools

• Recessed Handles

■Features This is a flat handle that is pulled up with your fingertips. It has compatible mounting holes with the THA-408AN and THA-505 series, etc...

• Tools

• Recessed Handles

■Features This is a flat handle that is pulled up with your fingertips. It has compatible mounting holes with the THA-408AN and THA-505 series, etc...

• Tools

• Recessed Handles

■Features This flat handle allows you to confirm locking/unlocking status with the "color" of the indicator. The handle can be pulled up with your ...

• Tools

• Recessed Handles

■Features This is a flat handle with an indicator color that confirms locking and unlocking. The handle can be pulled up with your fingertips. The ...

• Tools

• Recessed Handles

■Features This is the THA-408AN series with key number No. 200. It's a cylinder lock type with a flat handle, making unauthorized unlocking with a ...

• Tools

• Recessed Handles

■Features This is the THA-408AN series with key number No. 200. It's a cylinder lock type with a flat handle, making unauthorized unlocking with a ...

• Tools

• Recessed Handles

■Features This is the THA-408AN series with key number No. 200. It's a cylinder lock type with a flat handle, making unauthorized unlocking with a ...

• Tools

• Recessed Handles

■Features This is the THA-408AN series with key number No. 200. It's a cylinder lock type with a flat handle, making unauthorized unlocking with a ...

• Tools

• Recessed Handles

■Features This is the THA-408AN series with key number No. 200. It's a cylinder lock type with a flat handle, making unauthorized unlocking with a ...

• Tools

• Recessed Handles

■Features This is the THA-408AN series with key number No. 200. It's a cylinder lock type with a flat handle, making unauthorized unlocking with a ...

• Tools

• Recessed Handles

■Features Large, easy-to-use handle. ■Applications Measuring instruments, small boxes, transport equipment, etc. *Custom orders are welcome.

• Tools

• Recessed Handles

■Features A typical handle for carry boxes. ■Applications Measuring instruments, small boxes, etc. *Custom orders are welcome.

• Tools

• Recessed Handles

■Features Easy one-touch opening and closing. Suitable for both left and right-handed users. Includes an indicator function (lock identification di...

• Tools

• Recessed Handles

■Features This is a simple handle that can be attached to a lock and can be opened and closed with a finger. It adds a pull handle function without...

• Tools

• Recessed Handles