All Categories
History
This section provides an overview for oil-water seperators as well as their applications and principles. Also, please take a look at the list of 45 oil-water seperator manufacturers and their company rankings. Here are the top-ranked oil-water seperator companies as of December, 2024: 1.MicroStrain, a LORD Company, 2.Ellis Corporation, 3.Mercer International Inc..
Table of Contents
An Oil-Water Separator is a device designed to separate oil from a liquid mixture of oil and water. It is commonly used to extract oil from factory wastewater or to recover valuable liquids that cannot be easily disposed of. The main types of Oil-Water Separators are emulsion separation and oil-water separation, where emulsion refers to a state where oil and water are thoroughly mixed.
These separators play a vital role in various industries, offering several types of separation based on the oil's condition, the removal target, and the desired purity level, thus reducing environmental impact and operational costs.
Oil-water separators are extensively utilized in situations where oil might mix with coolants, refrigerants, and cleaning fluids. Their applications include:
By efficiently separating water and oil, these systems help reduce treatment costs and environmental impact, extending the life of cleaning fluids and lubricating oils.
Oil-Water Separators employ various methods for separation, with some of the most common being:
This method filters oil-containing water through a porous filtration yarn assembly or membrane under pressure, extracting pure water while removing oil and solids.
Utilizing the difference in specific gravity between oil and water, this method separates oil that surfaces or is stored in tanks. It can be time-consuming if the specific gravity difference is minimal.
Chemical separation degreases and removes oil, employing water-soluble agents like electrolyzed ionized water for a low environmental impact. This method is also effective for emulsion oil. Pre-separation of floating oil using a belt-type oil skimmer is crucial for large volumes of oil.
This method uses centrifugal force to separate oil from water by rotating the mixture at high speed. It effectively removes emulsified oil and is also useful for water-soluble cutting oil, coolants, and water-based detergents.
Other methods include ultrasonic, electrical, air jet, biological, vacuum suction separation, and more.
The permeation method Oil-Water Separator efficiently treats oil emulsions without chemicals and produces minimal sludge. It can significantly reduce waste liquid volume and thus industrial waste costs. The permeate is also recoverable for reuse, offering both environmental and economic benefits.
Gravity-based methods are simple and widely used. Centrifugal types are effective even for emulsified oils and solids.
There are several regulations about waste oil disposal and oil leakage accidents:
*Including some distributors, etc.
Sort by Features
Sort by Area
MicroStrain is based in Williston, Vermont, and is an American manufacturer of inertial and wireless sensors originally established in 1987 before being acquired by HBK in 2019. The company produces various industrial and tactical-grade sensors, wireless sensor network devices, and data analysis software. Its products include battery powered wireless 3-axis accelerometers with a rugged and weather-proofed shell, cloud-based platforms for sensor data management or analysis, and software for wireless sensor network control purposes. The company's products are mainly used by clients in the aerospace, automation, and construction industries.
ARGO-HYTOS, founded in 1947 and headquartered in Baar, Switzerland, is a global manufacturer and supplier of hydraulic system solutions. The company specializes in developing and producing components and systems for the hydraulic industry, having a product portfolio which encompasses off-line filters, off-line filter units, oil servicing systems, dewatering systems, and sensors and measurement devices. These offerings find applications in fluid power, motion control, and filtration technology for both mobile and industrial hydraulics. The company adheres to industry standards and holds certifications such as ISO 9001:2015 for Quality Management and ISO 14001 for Environmental Management.
BOGE America, Inc., Established in 1907 in Powder Springs, Georgia, USA, is a manufacturer specializing in industrial air compressors. The company offers a comprehensive product range that includes rotary screw compressors, piston compressors, high-speed turbo compressors, and compressed air accessories. It holds ISO 9001 certification, and its industrial air compressors find application in various industries, such as manufacturing, automotive, aerospace, and healthcare, providing essential compressed air solutions that enhance production processes, power tools, and numerous applications across a wide spectrum of industrial sectors. It offers, specialized air compressor solutions that support improved efficiency and stability in operations.
Ellis corporation was founded in 1898 and is located in Itasca, Illinois, U.S.A., is a manufacturer of wastewater treatment & water recovery equipment for various industrial applications. The company provides commercial laundry equipment, tunnel, water heating systems, pumping equipment, and, industrial laundry systems for oil & gas, hospitality, food & beverage, energy, and, concrete manufacturing sectors. The company's products have a year warranty and have applications in healthcare, textiles, transportation, chemical, and, agriculture arenas.
Mercer International Inc., founded in 2016 and headquartered in Deer Isle, Maine, United States, is a manufacturer specializing in oil and water separators designed for various industrial applications. The company provides oil water separators in different models such as rental, custom, and, retrofitting that can operate above & below ground modes along with oil skimmers that have applications in the oil wastewater treatment, stormwater, transportation, military, and, oil & gas industries. The company also offers flow distribution baffles, field adjustable plate designs, sturdy tank construction, hopper bottom sludge compartments, and, zero turbulence chimney zones for the wastewater management sector.
Oil Water Separator Technologies was established in Water Palm Beach, Florida, and is based in is a manufacturer of oil water separators and related accessories for various industrial and commercial applications. The company stocks different types of rental & demo units for temporary pilot study needs and provides oil stop valves, oil containment sumps, oil skimmers, coalescing media & filters, and, associated accessories as well as automatic floating skimmers and manual rotary pipe skimmers, for the electric utility, oil & chemical manufacture, stormwater processing, transportation, and vehicle maintenance industries.
Mohr Separations Research, Inc. was founded in 2001 and is based in Lake Dallas, Texas, U.S.A., is a manufacturer of oil-water separator systems for various industrial and commercial applications. The company provides oil water separators in different models such as rental, custom, and, retrofitting that can operate above & below ground modes along with coolant recovery systems, filters & plates, unit test rentals, and, associated parts for the electric utility, oil & chemical manufacture, stormwater processing, transportation, and vehicle maintenance industries.
Hydro Quip, Inc., established in 1996 with headquarters in the USA, is a manufacturer of water treatment equipment and systems. The company's product line includes above-ground rectangular water separators, below-ground oil water separators, hopper oil water separators, and pack tower air strippers to remove volatile organic compounds (VOCs) from wastewater. These products are used for vehicle and equipment washing in industries that include airports, railroads, marine, military, and transportation. Various manufacturers also use these products for processing water from hazardous waste, including chemicals, plastics, and rubber.
Highland Tank & Manufacturing Company, Inc., founded in Stoystown, PA, in 1946 is a manufacturer of Petroleum & Chemical Storage Tanks and Storage Tanks Separators, and Filtration Systems. The company's product portfolio includes Engineered ASME Pressure Vessels, Oil/Water Separators & Wastewater Treatment Systems, Grease Removal Units, and Water Storage Tanks. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. The company provides services such as Product Selection Guidance, Engineering Support, and Custom Manufacturing.
Oil Skimmers, Inc. is an American manufacturer of oil skimming and removal systems based in Cleveland, Ohio, founded in 1967. Equipment the company produces, primarily Brill tube type oil skimmers, floating weir skimmers, oil sinking systems, oil water separators, and decanters, remove oils, fats, and grease from coolant, process water, and wastewater. They also develop and manufacture custom engineered systems for customers with unique application requirements. The company serves the biodiesel, petrochemical, fuel distribution, metal production, and power generation industries.
H2K Technologies, Inc., based in Corcoran, Minnesota, is a manufacturer and supplier specializing in wastewater and environmental remediation solutions. The company’s products include water and air filtration equipment used in industrial wastewater, municipal and environmental markets. Their product portfolio includes sand and multimedia filters, carbon adsorption packages, blower and compressor systems, air stripping solutions, and more. With the capacity to integrate combinations of products into complete working systems, the company can provide custom solutions designed to the customer’s specifications. H2K solutions cater to a diverse range of clients including consulting engineers, manufacturers, petrochemical companies, and government agencies.
Ecologix Environmental Systems, LLC, founded in 2002 with headquarters in the USA, is a manufacturer of wastewater treatment systems and equipment. The company's products include activated carbon, glass filtration media, bag filters and vessels, and floc tubes. Ecologix Environmental Systems complete systems include BIO-CLEAR packaged treatment plants, floctube and chemical reaction tanks, integrated bio-reactor biological sewage treatment systems, and moving bed biofilm reactors used for the treatment of wastewater for the oil and gas, food, manufacturing, and automotive industries.
Pan America Environmental, Inc., established in Burlington, WI in 1991, is a manufacturer of industrial wastewater treatment systems for removing pollutants, contaminants, and harmful substances from the wastewater before it is discharged or reused. Their product portfolio includes Bilge Oily Water Treatment Systems, Batch Treatment Systems, Filtration Systems, Oil Water Separators and Vehicle Washwater Treatment Systems, used in industries including Chemical Manufacturing, Pharmaceutical, Power Generation and Aerospace. The company has sales distribution in Africa, South America, Mexico, Central America, Canada and Eastern Europe.
Mass Tank Corp. (MTC) is an American manufacturer of pressure vessels and storage tanks established in 1919 and based in Middleboro, Massachusetts. The company’s products include various aboveground tanks, oil/water separators, and ASME pressure vessels, as well as tank linings and equipment. These are compliant with more than eight regulatory standards within the industry, including UL-142 and those from the Steel Tank Institute. MTC also offers product engineering, inspection, and tank servicing to their clients in the oil and gas, power generation, water, and wastewater treatment sectors.
Ed W. Smith Machine Works, Inc. is a company based in the United States, established in 1955 and a manufacturer and supplier of machine components and solutions. The primary offerings of the company encompass bespoke machine components, computer numerical control (CNC)-machined elements, and specialized machinery tailored to meet the specific requirements of many industries. Ed W. Smith Machine Works is a dependable and a worthy collaborator for enterprises in search of machining solutions of quality. Their services cater to a range of applications, including many industries such as aerospace, automotive, industrial, and technological sectors.
ADF Systems, Ltd., founded in 1984, is a manufacturer based in Humboldt, Iowa specializing in manufacturing parts washers and pressure washers. The company offers a range of aqueous cleaning systems, including custom-built washers for specialized applications. Their line of pressure washers include portable, stationary, and trailer-mounted systems and both cold and hot water variants. They also supply proven detergents for parts washing applications. ADF's parts washers and pressure washers cater to industries such as Aerospace, Medical, Pharmaceutical, Automotive, and more.
EnviroEnergy Solutions, Inc. is headquartered in Brooklyn, New York as a manufacturer of custom-built self-cleaning systems for various propriety processes used in food processing, power plants, refractory manufacturing, and solid waste incineration plants. The company’s cleaning systems include high-efficiency cyclonic separators to reduce the number of solids in recycling liquid and increase the reliability of air cleaning equipment. The company’s abrasion-resistant cyclonic separators, marble bed scrubbers, and wet electrostatic precipitators function as stand-alone units or in conjunction to reduce waste and pollution such as carbon monoxide, nitric oxide, and hydrocarbons.
The Titus Company was founded in 1986 and is based in Morgantown, Pennsylvania. The Titus Company provides expertise for compressed air solutions for private companies in manufacturing, concrete, and chemical applications as well as government institutions such as the Royal Navy. Product offerings include blowers & vacuum products, chillers & coolers, compressors, dehydrators, dryers, dust collection equipment, energy management tools, filters, gas generators, pumps, and accessories. The Titus Company also offers maintenance, service, repair, system analysis, system dieting, monitoring, as well as installation services.
SpinTek Filtration, Inc was established in 1996, and based in Los Alamitos, California, is a manufacturer of solvent extraction media filters and proprietary filters for the mining operations of the metals such as copper, zinc, cobalt, and, uranium. The Company specializes in engineered filtration solutions for industrial, and commercial oily water separations and offers filters for high-volume organic separations in the mining process streams. They provide rotating filters using stainless steel membranes for harsh environments and high-level radioactive wastewater in nuclear applications, high solids, and, viscous applications. The company is NQA1 Certified with the U.S. Department of Energy for HLRW applications.
Ransohoff was founded in 1916 and is located in Cincinnati, Ohio. Today, the company is a division of Cleaning Technologies Group. Cleaning Technologies Group is a provider of innovative process technologies to precision and industrial global manufacturing markets. Ransohoff is a manufacturer of aqueous and solvent-based parts cleaning systems as well as a complete line of recyclable aqueous chemistries and waste minimization technologies. The company serves market sectors including electrical components, optics, general manufacturing, heavy-duty trucks, and off-road vehicles. The company offers industrial parts washers, ultrasonic and megasonic cleaning systems, benchtop cleaning systems, and electronic cleaning systems.
CRW Finishing, Inc. was founded in 1977 and is located in Addison, Illinois is a manufacturer and trader of metal finishing equipment. The company offers an array of products including wastewater treatment system supplies, centrifugal disk finishing equipment, and abrasive belt and buffing equipment. It extends services like surface refinement, decorative finishing, and tube polishing. These products find applications in sewage and water treatment plants, welding and woodwork facilities, and manufacturing of automobiles.
Beltran Technologies is based in Brooklyn, New York, and has a 50-year history in designing and engineering innovative air pollution control, gas cleaning systems, and bioenergy solutions for a vast range of industrial applications. Beltran systems include advanced wet and dry electrostatic precipitators, scrubbers, fume coalescers, and biomass gasification. Uses include liquid, solid, and precious metal recovery; prevention of downstream contamination, and stack opacity. Beltran services achieve cost savings, emission control, and energy efficiency for customers.
Complete Water Services LLC, headquartered in Marietta, Georgia, is an established supplier of water and wastewater treatment services. Their team comprises skilled professionals, including environmental engineers, certified water operators, construction managers, and hydrogeologists, ensuring the expertise needed to tackle diverse industrial, commercial, and community water needs. As a Thomas International Certified company and a member of ARCSA, Avetta, and ISN contractors, they uphold rigorous water standards in their services. They offer a comprehensive range of solutions, including design, consulting, construction, and maintenance.
HPI Processes, Inc. was founded in 1978 and is located 20 miles north of Philadelphia in Bucks County, Pennsylvania. The company is a privately held engineer of environmentally friendly technology for processing lines in the manufacturing industry. The company serves industries such as automotive, manufacturing, aerospace, and construction. The company provides inspection, cleaning, and draining services. In addition, the company has custom fabrication capabilities for the design, repair, and modification of equipment such as exhaust hoods and dampers. The company is experienced in thermos-welding and CNC router machining and heat forming for materials including PFC, PVDF, and acrylic.
Hydro Engineering, Inc., founded in 1980, is a manufacturer of Hydroblaster, Hydrokleen, and Hydropad products for washing, collecting, and recycling wash water. The products are used in recycling and filtration equipment, pressure washers, and above-ground steel portable/permanent wash racks. Based in Salt Lake City, UT, the company serves car washes, construction, military, and manufacturing industries. The CE, UL, and CSA standards are applied to the products produced as the company is ISO 9001:2015 Certified. The company offers diagnostics, safety system testing, pump rebuilding, and heating system repair services for pressure washers.
Inventive Systems, Inc. is a manufacturer of oil-in-water alarms & monitors, founded iin 1980, and located in Palm Beach, Florida. The company provides a range of oil-in-water detection solutions, including self-cleaning alarms for detecting oil in water, models that incorporate sample systems or probes for continuous measurement, portable handheld devices for quick assessment, and even an explosion-proof version for hazardous environments. These products play a critical role in various industries where the separation of oil and water is essential for environmental protection, safety, and process efficiency.
SkimOIL, LLC, established in 1990 and headquartered in Everett, Washington, is a custom manufacturer-builder, and distributor of marine and industrial pollution control equipment and systems. The company's product range includes Floating Weir Skimmers for surface oil removal, Submersible Oil Skimmers for water column oil extraction, and Oil Water Separators utilizing gravity to separate oil from water. The company also provide Booms to contain oil spills and absorbent products for oil cleanup. Serving the oil and gas, marine, and industrial sectors, SkimOIL, LLC holds certifications such as API 653, ABS, and DNV GL.
Tanks Direct is a full-service manufacturer and distributor of storage tank systems that was established in Laurel, Maryland in 1993. The company produces various under- as well as above-ground standard and modular tank systems for storing chemicals, petroleum, water, or compressed air. The tanks are fabricated from a range of materials including steel, concrete, fiberglass, and polyethylene (PE). Tanks Direct offers installation, maintenance, and removal, as well as onsite emergency services to their customers. The company has served clients such as the University of Maryland, Baltimore Gas & Electric, and Marriott International.
Davmar Air Compressors, established in 1993, is a distributor of rotary and reciprocating air compressors based in Ventura, USA. They offer sales and service a wide range of compressed air solutions for various industrial compressor applications, including medical and oil platforms. They also offer services for Refrigerated Air Dryers, Compressed Air Filters, and Separators of Oil and Water. Davmar is a Factory Authorized Service provider for renowned brands like Saylor Beall, Grimmer Schmidt, and Ingersoll Rand. The company also provides motor replacements and rentals for compressed air filters.
Precision Instrumentation was founded in 1982 and located in Chino, California. Precision Instrumentation is a distributor of dryers, valves, switches, and other measurement and control products. Product categories include pressure, flow, filters & separators, and controls. The pressure segment includes brass and stainless steel single and dual stage regulators, snubbers, diaphragm seals, and pressure switches. Flow includes rotameters, mass flow meters, controllers, mag meters, ultrasound, and others. Filters & separators include dryers, high flow, low flow, and high and low pressure streams. Valves include valves, switches, displays, controllers, and HMI devices.
Central Air Compressor was founded in 1959 and is based in Warren, Michigan. Central Air Compressor is a supplier of energy efficient air compressors, dry air systems, purification, and industrial process chillers. Central Air Compressor offers both new and used equipment as well as parts and accessories. New equipment options include compressors, air drying & filtration, process water chillers, nitrogen generators, and air piping. Central Air Compressor offers 24-hour emergency service and is able to provide air audits, complete compressed air systems, installation, and preventative maintenance.
Wessels Company is a subsidiary of NM Group Global LLC and is headquartered in Greenwood, Indiana, just south of Indianapolis. The company is a manufacturer and distributor of engineered metal products, especially tanks. The company is ASME certified and meets the Japanese Inspection Standard (JIS) allowing it to deliver a wide breadth of tanks and other pressure vessels. The company’s product includes multiple varieties of tanks including hydropneumatics, thermal expansion, buffer, and other specialty tanks.
Applied Process Equipment was founded in 1988 and is headquartered in Scottsdale, Arizona. Applied Process Equipment is a distributor of pumps, tanks, and water treatment equipment and services industries across the southwest United States including mining, power plants, waste & waste water, and other industries. Applied Process Equipment products include pumps & lift stations, fiberglass basins & steel tanks, and water treatment & arsenic removal. Water treatment pumps include metering, self-priming, slurry, ANSI, butterfly valves, screw pumps, and more.
Marcuse & Son was established in 1925 and operates out of Fort Worth, Texas. Marcuse & Son is a distributor of air compressors and air compressor parts and accessories. Air compressor offerings include reciprocating air compressors and rotary style air compressors. Marcuse & Son’s accessories include air receivers, alternators, belt guards, block heaters, brass valves and fittings, breather vents, compressor lubricants, exhaust mufflers, filters, regulators & lubes, refrigerated air dryers, and water separators.
Applied Power Solutions is located in Addison, Illinois and serves the metal processing, metal service center, paper mills & paper converting, canning, grinding mills, commercial laundry, marine drives oil & gas, power take off clutches, and material handling markets as a parts distributor and service provider. Some of Applied Power Solutions’s product offerings include clutches & brakes such as centrifugal clutches and water cooled brakes, hydraulics such as accumulators and manifold systems, pneumatics such as actuators and valves, and power transmission parts such as bearings and safety mats.
JORC INDUSTRIAL LLC, founded in 1991 and located in Heerlen, the Netherlands, is a manufacturer of compressed air condensate management products. Its broad range of products includes timer drains, oil and water separators, air-saving products, timers, and level-sensing drains. These products are used for automated condensate removal, ensuring air purity, optimizing compressed air usage, controlling system operations, and maintaining proper air quality. These products have applications in industries such as automotive, manufacturing, and construction.
FINI is a manufacturer of air compressors and related accessories that was established in Robassomero, Torino, Italy, in 1952. The company’s product lineup includes rotary screw compressors for heavy duty applications, piston compressors for standard industrial operations, and silent compressors for use in laboratory or medical facilities. It also offers related air treatment accessories such as filters, tanks, and hoses. The company’s products are commonly used in the manufacture of laboratory and research equipment, pneumatic tools, and industrial machinery.
Officine Meccaniche Industriali Srl (OMI) is based in Fogliano Redipuglia, Italy, and is a manufacturer of compressed air and industrial refrigeration products that was established in 1990 before its acquisition by Ingersoll Rand PLC in 2007. The company's portfolio comprises various products for compressed air treatment, liquid refrigeration, piping solutions, and related accessories. These include water or oil chillers, aftercoolers, butterfly valves, condensate separators, and refrigerator air dryers. The company's products are mainly used in the food and beverage, plastics, pharmaceuticals, and textile industries.
Comprag GmbH is a manufacturer of industrial dryers and compressors established in the late 1990s and based in Wuppertal, Germany. The company offers adsorption dryers with fixed cycle time controls and pre-installed filters, refrigerated dryers designed to maintain a dew point of +3°C, and direct drive as well as belt-driven screw compressors. It also offers related equipment, such as cyclone separators for removing fluid condensate from compressed air. The company chiefly serves clients in the industrial manufacturing and energy sectors.
Ingersoll Rand Inc. was founded in 1859 and is headquartered in Davidson, North Carolina. The company serves medical, energy, specialty vehicle, and other industries across the world with fluid transfer and other liquid handling systems. The company has two primary segments: Precision and Science Technologies and Industrial Technologies and Services. Precision and Science Technologies manufactures syringe pumps, hydrogen compression systems, and other components under brand names such as Air Dimensions, Milton Roy, and Zinnser Analytic. The Industrial Technologies and Services segment manufactures and services air and gas compression products under Ingersoll Rand, Nash, Emco Wheaton, and other brand names.
ALMiG Kompressoren GmbH is based in Köngen, Baden-Württemberg, and is a manufacturer of compressed air products that was originally established in 1920 as ALUP Kompressoren before rebranding to ALMiG in 2008. The company produces various piston compressors such as oil lubricated and mobile models, screw compressors including frequency controlled and modular models, and turbo compressors such as oil-free and low noise models. The company’s products are mainly used in the industrial processing and manufacturing sectors.
Jaxon Filtration was founded in 1984 and headquartered in Franklin, Georgia. The company is a manufacturer of products designed to extend the life of petrochemical, provide wastewater filtration, and clean exhaust vapor. All of the company’s products are made in the United States and used in petrochemicals, liquid filtration, cutting fluids, and phosphate ester oil. The company’s product capabilities include filter elements, filtration systems, bag filter elements, and replacement elements that use media including diatomaceous earth, activated carbon, molecular sieve, and selexsorb acid.
Atlas Copco UK Holdings Limited, established in 1974 in the UK, is a distributor and supplier of a wide range of industrial tools and machinery used in the aerospace, mobile construction, air motors, and electric motor industries. The company's product portfolio includes air compressors, N2 and O2 generators, tools, and industrial assembly solutions. Atlas Copco UK Holdings Limited also offers a range of products for mobile construction, including power generators, as well as providing clients with 24/7 tool and equipment rental solutions.
Rapid Pump & Meter Service Co., Inc. (Rapid Service) began in 1960 and currently operates in Paterson, New Jersey. Rapid Pump & Meter Service Co. primarily serves commercial services, municipal services, the industrial sector, and transportation industry both as a distributor and with service and support. As a distributor, Rapid Service offers several types of industrial pumps and industrial grinders of various sizes. Additional offerings include meters, controls, and mixers. As a service provider, Rapid Service offers emergency service, installation, design, engineering, retrofitting, troubleshooting, maintenance, and repair.
StylAir, LLC, is a manufacturer and distributor of compressed air, gas drying and filtration systems. Their product line includes air and gas dryers, compressors, filters, and accessories. Their SHL and SEH Dryers have a twin-tower, regenerative design with the ability to remove water vapor to a pressure dewpoint of -40°F and lower. Their 6N2 Digital Dewpoint Monitors feature stable polymer sensors for accurate measurement even in low moisture content ranges. With expanded operating parameters, these products find applications in diverse industries such as food, metal, pharmaceuticals, gas, and more.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | MicroStrain, a LORD Company |
8.8%
|
| 2 | Ellis Corporation |
7.1%
|
| 3 | BOGE America, Inc |
6.6%
|
| 4 | Mercer International Inc. |
6.6%
|
| 5 | Oil Water Separator Technologies |
5.5%
|
| 6 | Mohr Separations Research, Inc. |
5.5%
|
| 7 | Pan America Environmental, Inc. |
4.4%
|
| 8 | Oil Skimmers, Inc. |
3.8%
|
| 9 | Highland Tank & Manufacturing Company, Inc. |
3.8%
|
| 10 | ARGO-HYTOS |
3.3%
|
Derivation Method
The ranking is calculated based on the click share within the oil-water seperator page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
35 | 89.7% |
|
Italy
|
2 | 5.1% |
|
Netherlands
|
1 | 2.6% |
|
United Kingdom
|
1 | 2.6% |
54 products found
54 products
Zeotech of Ecology Co., Ltd.
30+ people viewing
Last viewed: 19 hours ago
The Simple W.0.S series is a device that efficiently collects and separates oil that floats to the surface of water-soluble liquids, reducing waste...
CBSI Corporation
80+ people viewing
Last viewed: 7 hours ago
■Summary JOWA oil/water separator uses gravity difference to separate emulsified oil with two filters. There are five types depending on processing...
Konhira Co., Ltd.
20+ people viewing
Last viewed: 6 hours ago
■Features ・Separates 10,000 ppm of water in oil to 300 ppm or less and automatically discharges it. ・Data is analyzed using a sequencer and autom...
BEKO TECHNOLOGIES K.K.
40+ people viewing
■Effective emulsion treatment: BEKOSPLIT® Separation of condensate always provides a solution if, due to its composition, even after a purely physi...
Zeotech of Ecology Co., Ltd.
20+ people viewing
The dispersion oil separator is an innovative recycling device that combines oil/water separation and precision filtration by improving the convent...
CBSI Corporation
40+ people viewing
■Summary EBU (Emulsion Breaker) Separates 80% of the water contained in emulsions. JOWA emulsion breakers are designed to break up the water contai...
Zeotech of Ecology Co., Ltd.
20+ people viewing
The ECO-UF series is an ultra-precision filtration device that uses an automatic backwashing hollow fiber UF membrane to completely separate and re...
TAIKO KIKAI INDUSTRIES CO.
20+ people viewing
Last viewed: 10 hours ago
The marine oil/water separator USH series has been developed by combining the technologies of the past three series of oil/water separators in acco...
Priteco Japan Co., Ltd.
260+ people viewing
Last viewed: 7 hours ago
Standard Response
It is a device that continuously collects and separates ascending oil and scum. Since the vacuum suction method is adopted, it exerts excellent per...
2 models listed
Kansai centrifugal separation machine production office
280+ people viewing
Last viewed: 4 hours ago
Very Fast Response
■ Overview -The basket -type centrifugal separator has a perforated formula (centrifugal filtration) and an inferior (centrifugal sediment) with ho...
NITTOSEIKO CO., LTD.
260+ people viewing
Last viewed: 6 hours ago
Fast Response
4.0 Company Review
We propose a cleaning device that generates micro bubbles from water and air, and has less environmental load that removes oil and dirt. It is a d...
Takahashi Metal Co., Ltd.
150+ people viewing
Last viewed: 7 hours ago
Fast Response
■Mechanism and application of oil-water separator Two types of filters are used to collect oil: a coalescer and a pre-filter. The cleaning solution...
SANSHIN MFG.CO.,LTD.
30+ people viewing
Standard Response
■Product description This is an oil/water separator that floats and separates the oil in the degreasing liquid, filters out suspended solids, maint...
SANSHIN MFG.CO.,LTD.
30+ people viewing
Last viewed: 39 minutes ago
Standard Response
■Product description This is an oil/water separator that floats and separates the oil in the degreasing liquid, filters out suspended solids, maint...
ANEST IWATA Corporation
430+ people viewing
Last viewed: 7 hours ago
Standard Response
4.0 Company Review
■ Use The oil contained in the drain (drain) is processed efficiently and low. ■ Characteristics ・ Energy -saving design that does not use any ut...
6 models listed
Zeotech of Ecology Co., Ltd.
20+ people viewing
Last viewed: 13 hours ago
The oil-containing drain water discharged from the air compressor is treated to meet the water pollution control law's permissible wastewater stand...
Masaie Co., Ltd.
530+ people viewing
Last viewed: 7 hours ago
■ Features Henry Technologies's mesh strainer oil separator separates oil in the refrigerant and returns to a compressor crankcase. By preventing t...
5 models listed
Sasakura Co., Ltd.
450+ people viewing
Last viewed: 15 hours ago
While maintaining the ease of use of the SHT series, which has highly reliable quality and performance, we have made it possible to comply with the...
5 models listed
Taisei Kogyo Co.,Ltd.
20+ people viewing
■What is an oil-water separator? This is a device that separates oil and water into oil and water. Our product "HydroTurn" enables high-precision a...
Taisei Kogyo Co.,Ltd.
30+ people viewing
■What is an oil-water separator? This is a device that separates oil and water into oil and water. Our product "HydroTurn" enables high-precision a...
Taisei Kogyo Co.,Ltd.
30+ people viewing
■What is an oil-water separator? This is a device that separates oil and water into oil and water. Our product "HydroTurn" enables high-precision a...
Zenith Co., Ltd.
100+ people viewing
Last viewed: 15 hours ago
The floating oil recovery separator ECOIL series enables efficient separation by collecting the oil that floats on the surface of water-soluble liq...
Zenith Co., Ltd.
130+ people viewing
Last viewed: 15 hours ago
The floating oil recovery separator ECOIL series enables efficient separation by collecting the oil that floats on the surface of water-soluble liq...
Zenith Co., Ltd.
110+ people viewing
Last viewed: 15 hours ago
The floating oil recovery separator ECOIL series enables efficient separation by collecting the oil that floats on the surface of water-soluble liq...
Zenith Co., Ltd.
100+ people viewing
Last viewed: 15 hours ago
The floating oil recovery separator ECOIL series enables efficient separation by collecting the oil that floats on the surface of water-soluble liq...
Zenith Co., Ltd.
70+ people viewing
Last viewed: 15 hours ago
The floating oil recovery separator ECOIL series enables efficient separation by collecting the oil that floats on the surface of water-soluble liq...
Yamamoto Kosakusho Co., Ltd.
20+ people viewing
Last viewed: 9 hours ago
A product that Sun Techno developed at the time of its founding, and which is still popular today as a ``hidden hit'', is the ``Mesh Skimmer,'' an ...
Yamamoto Kosakusho Co., Ltd.
20+ people viewing
Last viewed: 1 day ago
A product that Sun Techno developed at the time of its founding, and which is still popular today as a ``hidden hit'', is the ``Mesh Skimmer,'' an ...
Yamamoto Kosakusho Co., Ltd.
10+ people viewing
Last viewed: 12 hours ago
A product that Sun Techno developed at the time of its founding, and which is still popular today as a ``hidden hit'', is the ``Mesh Skimmer,'' an ...
