Multifunctional swing-type spray flux device FMR-1/FML-1
FA Shinka Technology
About This Product
Multifunctional swing -type flux device
■ Characteristics
･ Various application patterns
1. Normally, use as a normal swing fraxer.
2. Pitch feed coating flaxa mode: Works on the transport conveyor at any pitch transmission and applied evenly.
3. Areas specified application fraxes mode: The transport conveyor can be operated at any pitch sending, and the range can be specified.
4. Pseudo XY Flaxa mode: You can narrow down the application range by applying the scope specified application mode.
･ Low environmental load by reducing flux usage
The function of the application area can reduce the use of flux.
･ Handling and maintenance improvement: Dust collection hood can be easily decomposed
-
Product
Multifunctional swing-type spray flux device FMR-1/FML-1
-
Handling Company
FA Shinka Technology
-
Categories
2 Models of Multifunctional swing-type spray flux device FMR-1/FML-1
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Application method | Body weight | Conveyor width / maximum transport speed | Exhaust duct | External dimensions | Facility color | Flow direction/fixed rail | In the case of DIP palette, DIP Pallet size maximum | In the case of DIP palette, maximum size | In the case of a DIP palette, the parts height (including pallet) limit | In the case of raw board transportation, parts height limit | Maximum size for raw board transport | Number of registered models | Power-supply voltage | Required air pressure | Safety interlock | Transport height | Work weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FMR-1 |
Available upon quote | 2 fluid nozzle+flux pressure shipping method (standard nozzle) | Approximately 350kgf (at standard specification) | Width variable (up to 300 mm) ・ 2m/min | Ceiling: 1 organic exhaust place, 1 place φ100, required displacement: 15㎥/min (guideline wind speed 32m/s) | 1,200 (W) x 1,320 (d) x 1,350 (H) mm (excluding projections) | White (5pb8/0.5) Mansel color | Left → Right flow/Fixed the front | 300 x 380mm | 250 × 330mm (the maximum exterior of the substrate * fluctuates depending on the shape of the parts) | Below board = 20mm/upper = 60mm | Below board = 20mm/upper = 60mm | 300 x 380mm Baseboard thickness 1mm or more Transport 3mm or more (Please consider the board warpage.) | 99 models | Voltage 3 phase 200V, current 20A, electricity 4KVA, connecting location control board in the terminal stand | Necessary pressure: 0.5MPa or more, required flow rate: 120NL/min clean & dry air (equipment back φ10 air one -touch switch) | Opening and closing door is interlocked, screw -in cover is not interlocked | 900 ± 20mm (height on the bottom of the board) | Open a gap of 10cm or more when transporting a total of 5kg or less between the DIP palette and the substrate. |
|
|
FML-1 |
Available upon quote | 2 fluid nozzle+flux pressure shipping method (standard nozzle) | Approximately 350kgf (at standard specification) | Width variable (up to 300 mm) ・ 2m/min | Ceiling: 1 organic exhaust place, 1 place φ100, required displacement: 15㎥/min (guideline wind speed 32m/s) | 1,200 (W) x 1,320 (d) x 1,350 (H) mm (excluding projections) | White (5pb8/0.5) Mansel color | Right → left flow/Fixed before | 300 x 380mm | 250 × 330mm (the maximum exterior of the substrate * fluctuates depending on the shape of the parts) | Below board = 20mm/upper = 60mm | Below board = 20mm/upper = 60mm | 300 x 380mm Baseboard thickness 1mm or more Transport 3mm or more (Please consider the board warpage.) | 99 models | Voltage 3 phase 200V, current 20A, electricity 4KVA, connecting location control board in the terminal stand | Necessary pressure: 0.5MPa or more, required flow rate: 120NL/min clean & dry air (equipment back φ10 air one -touch switch) | Opening and closing door is interlocked, screw -in cover is not interlocked | 900 ± 20mm (height on the bottom of the board) | Open a gap of 10cm or more when transporting a total of 5kg or less between the DIP palette and the substrate. |
Click on the part number for more information about each product
