All Categories

History

Signboard lighting - LED floodlight NLFL series-NLFL50A-AC
Signboard lighting - LED floodlight NLFL series-Nikki Co., Ltd.

Signboard lighting - LED floodlight NLFL series
Nikki Co., Ltd.

Nikki Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

52.2hours


About This Product

■Features

LED floodlight for advertising signboards. Suitable for externally illuminated facades, outdoor signage lighting, etc. The main body is die-cast aluminum, and the mounting arms and bolts are all made of stainless steel, making it durable enough for permanent outdoor installation. There are 5 types of power consumption from 50W to 200W, and 3 types of light distribution angles can be selected: 30°, 60°, and 120°, so you can install it according to your application. It has lightning protection (lightning surge 15kV), can withstand inrush currents, surges, and momentary power outages, and has a safety design with high insulation properties.

■Application examples

Externally illuminated facades, field signboards, outdoor signboard lighting, etc.

■Outdoor permanent installation

The arm and bolt are made of stainless steel, and the power cable is 2PNCT 0.75mm2x3C made of chloroprene rubber. Designed for rust and weather resistance.

■Dustproof and waterproof

This is a dustproof and waterproof LED floodlight with an IP65 protection rating. It can be used as permanent outdoor lighting for externally illuminated facades and field signboards.

■Surge protection

It has a uniquely designed protection circuit that can withstand inrush currents, surges, and instantaneous power outages, and has a highly insulated safety design. We use LED products from highly reliable manufacturers around the world.

■Complete protection against lightning

The anti-static design quickly bypasses induced lightning surges, protecting products from lightning strikes. (Surge wave type 8/20μs can discharge up to 10kA.) When lightning strikes or lightning discharges occur, induced lightning surges occur in electric wires, destroying many electronic devices. This product has a built-in lightning surge protection element.

■SPD (surge arrester)

This LED floodlight is protected by limiting the instantaneous and violently fluctuating current (surge) caused by lightning, etc. A typical lightning strike generates a surge of tens of kV or more, but this LED floodlight has an SPD installed between the power supply IC and the ground, so that even if a surge enters when a lightning surge occurs, the lightning surge is transferred from the SPD to the ground. I will release it. *When installing, be sure to perform grounding.

■Arm material

The material is stainless steel, which will not rust even if left in an outdoor environment for a long time, and the outside is coated with weather-resistant paint.

  • Product

    Signboard lighting - LED floodlight NLFL series

Share this product


540+ people viewing

Last viewed: 10 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

5 Models of Signboard lighting - LED floodlight NLFL series

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power cable Power supply Light distribution angle Color temperature Illuminance (1m) 60° Illuminance (1m) 30° Illuminance (1m) 120° Color rendering Power consumption Body color Body material Expected lifespan Dimensions (W x H x D) Front Total luminous flux Protection class Operating temperature Rubber seal Optional Arm Horizontal Option Arm Standard Optional arm vertical Arm material
Signboard lighting - LED floodlight NLFL series-Part Number-NLFL50A-AC

NLFL50A-AC

Available upon quote

1.5m made of chloroprene rubber (2PNCT 0.75mm2 x 3C)

AC100-240V

30° / 60° / 120°

5,700K/4,000K

4,600lx

20,400lx

1,900lx

Ra80

50W

Black/white

Aluminum die casting

Operating temperature: 25℃ 60,000 hours *Life is when the illuminance reaches 70% of the initial illuminance

245 x 323 x 51.0mm

Tempered glass

5,400lm

IP65

-30℃~40℃ (However, no freezing)

Silicone rubber

FA-115HB/FA-115HW

FA-086AB/FA-086AW

FA-100VB/FA-100VW

Stainless

Signboard lighting - LED floodlight NLFL series-Part Number-NLFL80A-AC

NLFL80A-AC

Available upon quote

1.5m made of chloroprene rubber (2PNCT 0.75mm2 x 3C)

AC100-240V

30° / 60° / 120°

5,700K/4,000K

7,180lx

31,580lx

3,300lx

Ra80

80W

Black/white

Aluminum die casting

Operating temperature: 25℃ 60,000 hours *Life is when the illuminance reaches 70% of the initial illuminance

275 x 360 x 58.5mm

Tempered glass

8,900lm

IP65

-30℃~40℃ (However, no freezing)

Silicone rubber

FA-115HB/FA-115HW

FA-086AB/FA-086AW

FA-100VB/FA-100VW

Stainless

Signboard lighting - LED floodlight NLFL series-Part Number-NLFL100A-AC

NLFL100A-AC

Available upon quote

1.5m made of chloroprene rubber (2PNCT 0.75mm2 x 3C)

AC100-240V

30° / 60° / 120°

5,700K/4,000K

12,400lx

42,000lx

4,100lx

Ra80

100W

Black/white

Aluminum die casting

Operating temperature: 25℃ 60,000 hours *Life is when the illuminance reaches 70% of the initial illuminance

325 x 405 x 63.5mm

Tempered glass

11,200lm

IP65

-30℃~40℃ (However, no freezing)

Silicone rubber

FA-115HB/FA-115HW

FA-086AB/FA-086AW

FA-100VB/FA-100VW

Stainless

Signboard lighting - LED floodlight NLFL series-Part Number-NLFL150A-AC

NLFL150A-AC

Available upon quote

1.5m made of chloroprene rubber (2PNCT 0.75mm2 x 3C)

AC100-240V

30° / 60° / 120°

5,700K/4,000K

12,780lx

43,600lx

5,600lx

Ra80

150W

Black/white

Aluminum die casting

Operating temperature: 25℃ 60,000 hours *Life is when the illuminance reaches 70% of the initial illuminance

370 x 430 x 63.5mm

Tempered glass

15,600lm

IP65

-30℃~40℃ (However, no freezing)

Silicone rubber

FA-115HB/FA-115HW

FA-086AB/FA-086AW

FA-100VB/FA-100VW

Stainless

Signboard lighting - LED floodlight NLFL series-Part Number-NLFL200A-AC

NLFL200A-AC

Available upon quote

1.5m made of chloroprene rubber (2PNCT 0.75mm2 x 3C)

AC100-240V

30° / 60° / 120°

5,700K/4,000K

11,100lx

58,170lx

6,970lx

Ra80

180W

Black/white

Aluminum die casting

Operating temperature: 25℃ 60,000 hours *Life is when the illuminance reaches 70% of the initial illuminance

400 x 470 x 63.5mm

Tempered glass

19,700lm

IP65

-30℃~40℃ (However, no freezing)

Silicone rubber

FA-115HB/FA-115HW

FA-086AB/FA-086AW

FA-100VB/FA-100VW

Stainless

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Floodlights Products

Other products of Nikki Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Nikki Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

52.2hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree