Simultaneous multi-point irradiation/high precision YAG laser welding optical system LI100-01-LI100-01
Simultaneous multi-point irradiation/high precision YAG laser welding optical system LI100-01-Precise Gauge Co., Ltd.

Simultaneous multi-point irradiation/high precision YAG laser welding optical system LI100-01
Precise Gauge Co., Ltd.


About This Product

■Summary Conventionally, laser welding of precision parts has had the problem of parts rotating or moving several micrometers to several tens of micrometers due to volumetric contraction that occurs when the part melted by laser beam irradiation hardens again, which deteriorates welding accuracy. I am. In addition, in order to compensate for this amount of movement, laser irradiation is used, which is called compensation hammering, to pull the component back in the opposite direction to the misalignment, but this method creates large residual stress in the component, resulting in a long-term product It may also cause loss of reliability. To solve this problem, we have developed a high-precision laser welding optical system that provides simultaneous multi-point irradiation. This new laser welding optical system has achieved high-precision laser welding by making essential improvements to address many of the problems associated with conventional laser irradiation optical systems, as listed below. The LI100-01 simultaneous multi-point irradiation high-precision laser welding optical system uses a newly developed beam branching optical system, making it possible to simultaneously implant two beams onto the same plane. The beam splitting optical system splits the laser light introduced through one fiber into two beams inside the optical system, and converges them on the same plane with one condensing lens, so the irradiation intensity between the two beams is reduced. are always precisely balanced. Additionally, this optical system uses an aberration-correcting lens that focuses guide laser light (633 nm) and welding YAG laser light (1.06 μm), which have different wavelengths, onto the same focal point. The 3D spot position of the guide light to be imaged is accurately irradiated with the same size. This aberration correction lens is composed of three air gap lenses, and will not be damaged by high-intensity laser light. Furthermore, since the same aberration correction lens is used in the coaxial observation optical system, welding points can also be determined from the monitor image of the sample captured by the observation camera. In addition, an LED ring illumination for observation is built into the exit part of the lens, so external illumination is not required for observation. The LI100-01 simultaneous multi-point irradiation high-precision laser welding optical system is suitable for laser welding of surface-mounted optical components that require submicron precision, but it is also suitable for laser welding of surface-mounted optical components that require submicron precision. It is also effective for mounting, butterfly module welding, MEMS bonding, and precision electronic/optical component mounting.

  • Product

    Simultaneous multi-point irradiation/high precision YAG laser welding optical system LI100-01

Share this product


30+ people viewing


Free
Since our quotes are free, feel free to use our service.

No Phone Number Required
You won’t have to worry about receiving unnecessary calls.

1 Models of Simultaneous multi-point irradiation/high precision YAG laser welding optical system LI100-01

Product Image Part Number Price (excluding tax) Aberration correction wavelength Fiber connector Fiber irradiation magnification Focal length Lens configuration Lighting equipment Observation field of view Observation magnification Optical type Working distance
Simultaneous multi-point irradiation/high precision YAG laser welding optical system LI100-01-Part Number-LI100-01

LI100-01

Available upon quote 1.06μm, 633nm Various support Approximately 1x Laser irradiation part: 50mm, observation part: 50mm Laser irradiation section: 6 lenses in 6 groups, observation section: 6 lenses in 6 groups Led ring lighting Approx. 4.4mm x 3.3mm (when using 1/3 inch camera) Approximately 1x 2 beam branching optical system 75mm

Customers who viewed this product also viewed

Other products of Precise Gauge Co., Ltd.


View more products of Precise Gauge Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree