All Categories

History

Demand monitoring device Energy saving system Power line communication load control system PLC Super Max II Load control receiver-PLC-SM113R
Demand monitoring device Energy saving system Power line communication load control system PLC Super Max II Load control receiver-Osaki Electric Industry Co., Ltd.

Demand monitoring device Energy saving system Power line communication load control system PLC Super Max II Load control receiver
Osaki Electric Industry Co., Ltd.

Osaki Electric Industry Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

24.1hours

Relatively Fast Response


About This Product

■Features

Electrical wiring is transformed into a control line. Existing power distribution lines are used as the route for the load control signal from the demand control device itself, making construction easy and low cost, and allows quick response to load additions and relocations.

■When connecting to a three-phase three-wire bank

The load control transmitter PLC-SM013T connects to an ungrounded wire. Connect the load control receiver PLC-SM123R (for 200V) in phase with the transmitter. Phase order and polarity do not matter. Load control receiver PLC-SM113R (for 100V) cannot be used.

■When connecting to a single-phase 3-wire bank

The load control transmitter PLC-SM013T connects to two wires other than the neutral wire. Connect the PLC-SM113R or PLC-SM123R to the load control receiver depending on the voltage. Phase order and polarity do not matter.

■Notes on system installation

・Although we have taken sufficient technical measures to prevent noise, signal transmission may not be possible if the power supply environment is extremely poor. ・It is not recommended to install this product in facilities where medical equipment or other systems that have a serious impact on human life or property are installed. - Regarding the control of systems such as air conditioners, please consult the manufacturer regarding technical possibilities.

  • Product

    Demand monitoring device Energy saving system Power line communication load control system PLC Super Max II Load control receiver

Share this product


180+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Demand monitoring device Energy saving system Power line communication load control system PLC Super Max II Load control receiver

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power line power frequency Power line voltage Power line bank capacity Communication method Transmitter injection current Mass Setting Contact type selection switch Settings Contact operation switch Settings Address setting switch transmission Display Contact display LED Display Reception display LED Power consumption Maximum transmission distance Rated voltage Rated frequency External dimensions Installation method Output Load control output points Output Load control output Contact capacity Output Load control output contact Input Load control signal 1 point Usage environment Frequency band used
Demand monitoring device Energy saving system Power line communication load control system PLC Super Max II Load control receiver-Part Number-PLC-SM113R

PLC-SM113R

$ 162.50〜

50/60Hz±2Hz (automatic switching)

AC220V or less

500kVA or less

Power line communication method
(Unidirectional: transmitter → receiver)

12A or less (at voltage 200V)

Approximately 0.35kg

A contact" - "B contact" Select by contact

On" - "Auto" - "Off" 2 contacts common

Hexadecimal rotary switch (setting range 0~F) Set for each contact

When the contact is closed: Lights up When the contact is open: Lights off Color: Red
Display by contact

When power is turned on: Lit When receiving: Blinking Color: Red
2 contacts common

2VA or less

300m

AC100V±10%

50/60Hz±2Hz (automatic switching)

74.5 (W) ×99 (H) ×75 (D) mm

Agreement mounting/DIN rail mounting/direct mounting

2 contact outputs

AC250V 5A (resistive load)

No-voltage contact (A/B contact switchable)

Shared with power terminal

Temperature: 0℃~50℃ Humidity: 90%RH or less (non-condensing)

Less than 10kHz

Demand monitoring device Energy saving system Power line communication load control system PLC Super Max II Load control receiver-Part Number-PLC-SM123R

PLC-SM123R

$ 162.50〜

50/60Hz±2Hz (automatic switching)

AC220V or less

500kVA or less

Power line communication method
(Unidirectional: transmitter → receiver)

12A or less (at voltage 200V)

Approximately 0.35kg

A contact" - "B contact" Select by contact

On" - "Auto" - "Off" 2 contacts common

Hexadecimal rotary switch (setting range 0~F) Set for each contact

When the contact is closed: Lights up When the contact is open: Lights off Color: Red
Display by contact

When power is turned on: Lit When receiving: Blinking Color: Red
2 contacts common

2VA or less

300m

AC200V±10%

50/60Hz±2Hz (automatic switching)

74.5 (W) ×99 (H) ×75 (D) mm

Agreement mounting/DIN rail mounting/direct mounting

2 contact outputs

AC250V 5A (resistive load)

No-voltage contact (A/B contact switchable)

Shared with power terminal

Temperature: 0℃~50℃ Humidity: 90%RH or less (non-condensing)

Less than 10kHz

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Power Monitorings Products

Other products of Osaki Electric Industry Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Osaki Electric Industry Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

24.1hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree