Frequency variable controller that can steplessly vary the volume using PLC (sequencer) D/A output CVFN-MZF series with constant amplitude function
Shimatec Co., Ltd.
About This Product
This is a controller that can change the drive frequency of the parts feeder. The parts feeder can be driven without adjusting vibration by increasing or decreasing springs. Also, it can be driven regardless of the 50Hz region or 60Hz region, which is very convenient. If you have a small workpiece and require finer vibration than the 60Hz resonance point, you can use it at 70Hz or higher, or if you are driving a large bowl, you can drive it at 50Hz or lower. It also has a constant voltage function that keeps the voltage constant.
■CVFN MZF series.
■Constant amplitude controller
A vibration detection sensor is attached to the oscillator to monitor the vibration and send feedback to the controller to keep the amplitude constant. Vibration remains almost constant despite fluctuations in voltage, amount of workpiece input, etc. This is extremely useful in environments where vibration fluctuations are a problem. It usually has an inverter function.
This is a made-to-order product.
-
Product
Frequency variable controller that can steplessly vary the volume using PLC (sequencer) D/A output CVFN-MZF series with constant amplitude function
-
Handling Company
Shimatec Co., Ltd.
-
Categories
1 Models of Frequency variable controller that can steplessly vary the volume using PLC (sequencer) D/A output CVFN-MZF series with constant amplitude function
| Product Image | Part Number | Price (excluding tax) | Additional features (standard equipment) Overload and short circuit protection | Additional functions (standard equipment) Compatible with power supply voltage fluctuations | Additional functions (standard equipment) LED display | Additional functions (standard equipment) Remote control method | Additional functions (standard equipment) Run/stop control | Additional functions (standard equipment) Soft start | Environmental structure Ambient humidity | Environmental structure Ambient temperature | Environmental structure External color | Environmental structure External dimensions (mm) | Environmental structure Weight (kg) | Input frequency | Input voltage | Options (sold separately) OP-5N | Output current | Output drive method | Output frequency | Output voltage |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
CVFN-3MZF |
Available upon quote | The ALARM indicator lights up when there is an overload or short circuit. (Automatic return) | A control function that reduces vibration changes due to power supply voltage fluctuations. (Valid only when on hand) | Displays the output frequency or output voltage using the selector switch. |
Hand VR operation on MC → Display V 0~200V (0~100V) Remote +0~10V operation with RC → Display V 0~200V (0~100V) Input resistance 4.7kΩ Proportional output (e.g. sequencer D/A output) 0~10V |
Run and stop signals: RUN and STOP on the controller body (select by terminal connection) | It has a built-in soft start timer that allows the amplitude to rise smoothly when the power is turned on or when operation starts using an external signal. | 35~85%RH | -15~35℃ (No freezing or condensation) | Munsell symbol N-3.0 metallic silver | Approximately 68W x 199H x 139D | Approximately 1.7 | 50Hz/60Hz | AC200V specifications (AC200~220) →Standard specifications AC100V specifications (AC90~110V) →Special specifications must be specified when ordering | If the relay board (OP-N5) is added, signals synchronized with the parts feeder (run and stop signals) can be obtained through the relay contact (2C). | Electromagnetic main body 350φ~450φ | PWM method | Half wave 50~100Hz, full wave 100~200Hz (switched with switch inside the board) | AC 0~100V/0~200V (AC 0~110V/0~220V MAX) |
Customers who viewed this product also viewed
Other products of Shimatec Co., Ltd.
View more products of Shimatec Co., Ltd.
About Company Handling This Product
- Japan