Industrial endoscope X2000 HD
Mils Systems Co., Ltd.
About This Product
■Features
・High-end model industrial endoscope: High image quality, durability, and excellent operability
・The tip camera can be bent in all directions (up, down, left and right) (Waterproof performance of the insertion part: 1m deep, can be used for 30 minutes)
・You can choose the outer diameter of the insertion part of the industrial endoscope X2000HD from Φ6.5mm, Φ6mm, Φ3.9mm, and Φ2.8mm.
■Options
・Φ6.5mm direct view probe, bendable in all directions. Probes up to 7m are available. A mirror adapter, dual view mirror adapter, and pin probe adapter can be attached to the included direct viewing head.
・Φ6.0mm direct view side view probe, bendable in all directions. Probes up to 10m are available. It has two built-in cameras and can be used by switching between direct viewing direction and side viewing direction. Ideal for side view observation
・Φ3.9mm direct view probe, bendable in all directions. The viewing angle is 120°, allowing for wide-angle observation.
・Φ3.9mm direct-viewing side-viewing probe that can be bent in all directions. It has two built-in cameras and can be used by switching between direct viewing direction and side viewing direction. Ideal for side view observation
・Φ2.8mm direct view probe, bendable in all directions. The viewing angle is 120°, allowing for wide-angle observation.
■Accessories
・Rigid sleeve: Probe can be held straight. Example of use: Inspection of high and low places, inspection of deep places inside the equipment
・For 6.5mm probe, outer diameter 8mm
・For 3.9mm probe, outer diameter 6mm
■Equipped with a large, easy-to-read 7-inch TFT touch panel LCD monitor (waterproofing performance of the monitor part: IP57, with temperature warning function)
・Built-in battery can be used for approximately 3 hours
·zoom
・Inspection image comparison function
・Comment input function
・Audio input function
■Joystick function
You can operate the curved part of the camera, lock the angle, and adjust the brightness at your fingertips.
■Application
・Inspection of engine parts of automobiles, aircraft, etc., inspection of vehicle bodies, and interior of aircraft bodies
・Piping inspection for chemical plants and power plants
・Piping inspection of boiler piping and heat exchanger tubes
・Inspection of water and sewage pipes
・Police criminal investigation
-
Product
Industrial endoscope X2000 HD
-
Handling Company
Mils Systems Co., Ltd.
-
Categories
1 Models of Industrial endoscope X2000 HD
| Product Image | Part Number | Price (excluding tax) | Battery drive/charging time | Camera temperature warning display | I/O port | Lcd monitor | Operating temperature | Voice input | Waterproof performance (monitor) | Wifi |
|---|---|---|---|---|---|---|---|---|---|---|
|
|
X2000 |
Available upon quote | Driving time: Approximately 3 hours / Charging time: Approximately 4 hours | 60℃/80℃/100℃ (3-level warning) *When the warning starts, pull it out immediately to lower the temperature of the probe tip. | SD card slot (up to 32GB) / USB Type-C / HDMI Type-D (AV output) | 7 inch color Resolution 1,024 x 600 Approx. 240×160×70mm・1,480g AC100~240V | When powered by battery: 0~45℃ When using AC adapter: 0~35℃ | Built-in microphone (can be turned on/off from OSD menu) | IP57 | 802.11 b/g/n |
Customers who viewed this product also viewed
Other products of Mils Systems Co., Ltd.
View more products of Mils Systems Co., Ltd.
About Company Handling This Product
- Japan