Electrostatic mist collector ISK-EM-8eIII/ISK-EM-15eII
Ikura Seiki Co., Ltd.
About This Product
■Summary
・Mist collector specialized for collecting oily mist from automatic lathes
- Compatible with high concentration mist using medium and high pressure coolant equipment
■“New brush discharge technology” realizes a significant increase in compatible mist concentration and stable operation (ISK-EM-8eIII)
Compared to the conventional needle type, even if one discharge point becomes dirty, it can be backed up by countless discharge points, so discharge can be performed reliably.
■Suction port with unique secondary air adjustment function
In order to ensure collection performance, all models are equipped as standard with a function that adjusts the wind speed to the optimum level according to the airtightness and volume of the processing chamber of the automatic lathe.
■ Simplify troublesome installation preparations by standardizing the installation method using a dedicated mount
The lineup includes an elevating pedestal that can be installed on top of the material feeder, and a fixed pedestal with casters that can be easily transported.
*The noise values listed in the specification table are actually measured values according to our regulations, and do not guarantee the noise values under all usage conditions.
*Performance values of standard specifications are listed. Performance values may vary for custom specifications
*Please use near the air volume at the point of use.
*Cannot be used below the minimum air volume. If the air volume is insufficient, please bring in secondary air.
-
Product
Electrostatic mist collector ISK-EM-8eIII/ISK-EM-15eII
-
Handling Company
Ikura Seiki Co., Ltd.
-
Categories
2 Models of Electrostatic mist collector ISK-EM-8eIII/ISK-EM-15eII
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Accessories | Allowable suction target temperature | Collection efficiency | Collection target | Mass | Maximum inlet concentration | Noise | Oil drain port | Operating environment temperature | Point of use air volume | Power cord length | Power supply | Pretreatment | Recommended breaker | Size | Static thickness at the point of use () is the maximum |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
ISK-EM-8eIII |
Available upon quote | 1 inch 90° elbow, hose nipple | 0~40℃ | 99% (weight ratio by filter paper) |
Oil-based mist with a flash point of 80℃ or higher Water-soluble mist with electrical conductivity of 300S/m or less |
29kg | 200mg/m3 | 65±2dB (A) or less | 1 inch nipple (tapered male thread for R1 pipe) | 0~40℃ |
7.5m3/min Min 5.0m3/min Max 7.5m3/min |
8m (3 cores, no plug) | Single phase 200V 50/60Hz shared | Stainless steel wire demister | 5A | 838×430×400mm | 50Pa (900Pa) |
|
|
ISK-EM-15eII |
Available upon quote | 1 inch 90° elbow, hose nipple | 0~40℃ | 99% (weight ratio by filter paper) |
Oil-based mist with a flash point of 80℃ or higher Water-soluble mist with electrical conductivity of 300S/m or less |
72kg | 200mg/m3 | 72±2dB (A) or less | 1 inch nipple (tapered male thread for R1 pipe) | 0~40℃ |
15m3/min Min 12.5m3/min Max 19m3/min (50Hz) 22m3/min (60Hz) |
8m (4 cores, no plug) | 3 phase 200V 50/60Hz shared | Stainless steel wire demister | 10A | 1,296×478×620mm |
350Pa (550Pa) 50Hz 600Pa (750Pa) 60Hz |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Ikura Seiki Co., Ltd.
View more products of Ikura Seiki Co., Ltd.
About Company Handling This Product
- Japan