All Categories

History

Reflow checker Multi-point wireless temperature sensor converter (transmitter) Heat resistant specification NWS-Multi-NWS-MULTI-1-06-K42-N
Reflow checker Multi-point wireless temperature sensor converter (transmitter) Heat resistant specification NWS-Multi-RKC INSTRUMENT

Reflow checker Multi-point wireless temperature sensor converter (transmitter) Heat resistant specification NWS-Multi
RKC INSTRUMENT

RKC INSTRUMENT's Response Status

Response Rate

100.0%

Response Time

15.5hours

Relatively Fast Response


About This Product

■Wireless transmission of temperature measurement data in high temperature atmosphere up to 100m

・Profiles of printed circuit board temperature and component temperature during the reflow process can be measured wirelessly in real time. You can wirelessly measure temperature in real time to check whether the soldering temperature range is appropriate, whether the guaranteed heat resistance temperature of the component is exceeded, and to verify the temperature distribution when heating a printed circuit board. ・Profile quality can be determined using the dedicated software NWS-MM. ・Receiver: NWS-COM can be connected to a PC, PLC, etc. via RS-422A/RS-485 (MODBUS). ・Protem2 software is available that can be connected to a computer to manage and monitor various setting data.

■Heat-resistant performance: Thin heat-resistant specification that can be heated to 300℃ for 3 minutes (reflow oven application)

・Thin type compatible with reflow oven entrance size. ・The temperature sensor (recommended product) is a fluororesin-coated K thermocouple wire. *Other K thermocouples can also be used. *Depending on the configuration of the transport path, a "rack" may be required to carry the NWS-Multi. *Please fix the temperature sensor to the measurement target using heat-resistant polyimide tape, epoxy resin, etc.

■Heat resistance performance when using a heat resistant case

100℃ within 13 minutes, 200℃ within 5 minutes, 300℃ within 3 minutes *Please use within the range where the internal temperature does not exceed 50℃ (If the internal temperature exceeds 50℃, it will go into an alarm state) *Heat-resistant case is optional.

■COM-KG can be used as a receiver. Convenient for on-site operation

Wireless communication is also possible with the COM-KG USB communication converter with wireless function. No power connection is required, and operation using a PC is easily realized. *When using COM-KG as a wireless receiver, software NWS-MM cannot be used. *COM-KG with NWS-Multi wireless function can be switched from normal serial loader to USB communication converter. *Cannot be used simultaneously with serial loader communication conversion

  • Product

    Reflow checker Multi-point wireless temperature sensor converter (transmitter) Heat resistant specification NWS-Multi

Share this product


100+ people viewing

Last viewed: 2 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Reflow checker Multi-point wireless temperature sensor converter (transmitter) Heat resistant specification NWS-Multi

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power supply Battery voltage Battery life Mass Absolute humidity Radio identification Radio frequency band Number of input points Operation when input is disconnected Input range Effect of signal source resistance Operating temperature range Ambient humidity Transmission distance Type Sampling period Option
Reflow checker Multi-point wireless temperature sensor converter (transmitter) Heat resistant specification NWS-Multi-Part Number-NWS-MULTI-1-06-K42-N

NWS-MULTI-1-06-K42-N

Available upon quote

Uses 2 AA nickel metal hydride rechargeable batteries (batteries not included)

DC3V or less

Sampling cycle: 1 second, approximately 15 hours
*Battery life is not a guaranteed value as it varies depending on usage conditions and environment.

Approximately 155g

MAX.W.C 29.3g/m3 dry air at 101.3kPa

Specified radio equipment stipulated in Article 2, Paragraph 1, Item 19 of the Certification Regulations (This is a regulation of the Japanese Radio Law and can only be used within Japan.)

2,402MHz~2,482MHz

6ch

Upscale

K thermocouple -200.0~+1,372.0℃

Approximately 0.15μV/Ω (converted depending on the type of thermocouple)

Without heat-resistant case: 0~50℃

5~95%RH (no condensation)

Approximately 100m (varies depending on usage environment)

Thermocouple input insulation type

1 second ~ 60 seconds
(Can be changed in 1 second increments via wireless communication)

No options

Reflow checker Multi-point wireless temperature sensor converter (transmitter) Heat resistant specification NWS-Multi-Part Number-NWS-MULTI-1-06-K42-1

NWS-MULTI-1-06-K42-1

Available upon quote

Uses 2 AA nickel metal hydride rechargeable batteries (batteries not included)

DC3V or less

Sampling cycle: 1 second, approximately 15 hours
*Battery life is not a guaranteed value as it varies depending on usage conditions and environment.

Approximately 830g

MAX.W.C 29.3g/m3 dry air at 101.3kPa

Specified radio equipment stipulated in Article 2, Paragraph 1, Item 19 of the Certification Regulations (This is a regulation of the Japanese Radio Law and can only be used within Japan.)

2,402MHz~2,482MHz

6ch

Upscale

K thermocouple -200.0~+1,372.0℃

Approximately 0.15μV/Ω (converted depending on the type of thermocouple)

Without heat-resistant case: 0~50℃
With heat-resistant case: 100℃ within 13 minutes, 200℃ within 5 minutes, 300℃ within 3 minutes
*Use within a range where the internal temperature does not exceed 50℃.

5~95%RH (no condensation)

Approximately 100m (varies depending on usage environment)

Thermocouple input insulation type

1 second ~ 60 seconds
(Can be changed in 1 second increments via wireless communication)

Heat resistant case available

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Temperature Sensors Products

Other products of RKC INSTRUMENT

Reviews shown here are reviews of companies.


View more products of RKC INSTRUMENT

About Company Handling This Product

Response Rate

100.0%


Response Time

15.5hrs

Company Overview

RKC Instrument has been continually growing for over half a century and strives to be a solution provider of m...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree