All Categories
History
Response Rate
100.0%
Response Time
14.3hours
Relatively Fast Response
Product
Built-in radiation thermometer BTM-30/BTM-40Handling Company
RKC INSTRUMENTCategories
Click on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | Power supply | Mass | Display resolution | Earthquake resistance | Water resistance | Measurement accuracy | Measurement temperature range | Measurement area size | Current consumption | Detection element, wavelength | Material | Emissivity correction | Contact output capacity | Contact output | Response time | Size | External input | Reproducibility | Optical system | Storage temperature | Ambient humidity | Ambient temperature | Interface | Analog output allowable load | Analog output accuracy | Analog output update time | Analog output resolution | Analog output impedance | Analog output | Function |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
BTM-30TAC |
Available upon quote |
DC12~24V±10% |
Sensor head approximately 100g (including 3m cable), amplifier approximately 200g (including 2m cable) |
1℃ |
10~55Hz, amplitude 1.5mm, 2 hours each in XYZ directions |
Sensor head IP69K, amplifier IP40 |
-40~0℃: ±3℃, 1~200℃: ±2℃, 201~500℃: ±1% of reading value |
-40~+500℃ |
Φ30/500mm (22:1) |
120mA (at maximum load), 80mA (at Eco mode) |
Thermopile/8~14μm |
Sensor head: SUS, amplifier: ABS, sensor cable: PVC (low/medium temperature model) / silicone rubber (high temperature model) |
0.1~1.2 |
300mA/DC30V or less |
Photo MOS FET×2 (c contact×2), 300mA/DC30V or less |
150msec/90% |
Sensor head: M12 (Φ14) ×34mm, amplifier: 35×52×38.5mm |
Bank function: 4 banks, synchronous input trigger function, external trigger function, wave trigger function |
~200℃: ±1.0℃ 201~: Reading value ±0.5% |
Si lens |
0~70℃ |
35~85% (no condensation) |
Sensor head 0~100℃, amplifier 0~65℃ |
Digital output |
250Ω |
±0.5% or ±1.0% |
10msec |
0.5℃ |
47Ω |
DC4~20mA |
Teaching function: 2 points, response time selection (delay) function: 1~200 (0.15 seconds~2 seconds), output scaling function |
|
|
BTM-40TAC |
Available upon quote |
DC12~24V±10% |
Sensor head approximately 100g (including 3m cable), amplifier approximately 200g (including 2m cable) |
1℃ |
10~55Hz, amplitude 1.5mm, 2 hours each in XYZ directions |
Sensor head IP69K, amplifier IP40 |
-40~0℃: ±3℃, 1~200℃: ±2℃, 201~500℃: ±1% of reading value |
-40~+500℃ |
Φ40/500mm (15:1) |
120mA (at maximum load), 80mA (at Eco mode) |
Thermopile/8~14μm |
Sensor head: SUS, amplifier: ABS, sensor cable: PVC (low/medium temperature model) / silicone rubber (high temperature model) |
0.1~1.2 |
300mA/DC30V or less |
Photo MOS FET×2 (c contact×2), 300mA/DC30V or less |
150msec/90% |
Sensor head: M12 (Φ14) ×34mm, amplifier: 35×52×38.5mm |
Bank function: 4 banks, synchronous input trigger function, external trigger function, wave trigger function |
~200℃: ±1.0℃ 201~: Reading value ±0.5% |
Si lens |
0~70℃ |
35~85% (no condensation) |
Sensor head 0~100℃, amplifier 0~65℃ |
Digital output |
250Ω |
±0.5% or ±1.0% |
10msec |
0.5℃ |
47Ω |
DC4~20mA |
Teaching function: 2 points, response time selection (delay) function: 1~200 (0.15 seconds~2 seconds), output scaling function |
|
|
BTM-30TAC-HT |
Available upon quote |
DC12~24V±10% |
Sensor head approximately 100g (including 3m cable), amplifier approximately 200g (including 2m cable) |
1℃ |
10~55Hz, amplitude 1.5mm, 2 hours each in XYZ directions |
Sensor head IP69K, amplifier IP40 |
0~200℃: ±2℃, 201~1,000℃: Reading value ±1% |
0~1,000℃ |
Φ30/500mm (22:1) |
120mA (at maximum load), 80mA (at Eco mode) |
Thermopile/8~14μm |
Sensor head: SUS, amplifier: ABS, sensor cable: PVC (low/medium temperature model) / silicone rubber (high temperature model) |
0.1~1.2 |
300mA/DC30V or less |
Photo MOS FET×2 (c contact×2), 300mA/DC30V or less |
150msec/90% |
Sensor head: M12 (Φ14) ×34mm, amplifier: 35×52×38.5mm |
Bank function: 4 banks, synchronous input trigger function, external trigger function, wave trigger function |
~200℃: ±1.0℃ 201~: Reading value ±0.5% |
Si lens |
0~70℃ |
35~85% (no condensation) |
Sensor head 0~180℃, amplifier 0~65℃ |
Digital output |
250Ω |
±0.5% or ±1.0% |
10msec |
0.5℃ |
47Ω |
DC4~20mA |
Teaching function: 2 points, response time selection (delay) function: 1~200 (0.15 seconds~2 seconds), output scaling function |
|
|
BTM-40TAC-HT |
Available upon quote |
DC12~24V±10% |
Sensor head approximately 100g (including 3m cable), amplifier approximately 200g (including 2m cable) |
1℃ |
10~55Hz, amplitude 1.5mm, 2 hours each in XYZ directions |
Sensor head IP69K, amplifier IP40 |
0~200℃: ±2℃, 201~1,000℃: Reading value ±1% |
0~1,000℃ |
Φ40/500mm (15:1) |
120mA (at maximum load), 80mA (at Eco mode) |
Thermopile/8~14μm |
Sensor head: SUS, amplifier: ABS, sensor cable: PVC (low/medium temperature model) / silicone rubber (high temperature model) |
0.1~1.2 |
300mA/DC30V or less |
Photo MOS FET×2 (c contact×2), 300mA/DC30V or less |
150msec/90% |
Sensor head: M12 (Φ14) ×34mm, amplifier: 35×52×38.5mm |
Bank function: 4 banks, synchronous input trigger function, external trigger function, wave trigger function |
~200℃: ±1.0℃ 201~: Reading value ±0.5% |
Si lens |
0~70℃ |
35~85% (no condensation) |
Sensor head 0~180℃, amplifier 0~65℃ |
Digital output |
250Ω |
±0.5% or ±1.0% |
10msec |
0.5℃ |
47Ω |
DC4~20mA |
Teaching function: 2 points, response time selection (delay) function: 1~200 (0.15 seconds~2 seconds), output scaling function |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
