PFA (fluororesin) coated temperature sensor FT-100 (K thermocouple) /FR-100 (resistance temperature detector)
RKC INSTRUMENT

FT-100-K-42-A-250-500-W-AW

PFA (fluororesin) green

PFA (fluororesin) 1 green (+ pole), 1 white (- pole)

Pure water cleaning + clean pack treatment

Untreated (no pre-soldering)

±1.5℃ (insertion length 100mm or more)

0~200℃ (temperature measurement part) *No condensation except on the protection tube part

14 seconds (90% of final value) typ.
*Leave it at room temperature, then put it in boiling water at 100℃ and evaluate at 90% of the stability point. The insertion length should be 100mm or more

Φ0.32mm×1 piece

K thermocouple class 1 class

250mm

15mm (excluding 90mm from the tip of the temperature measuring section)

PFA (fluororesin)

PFA (fluororesin)

Outer diameter Φ4mm

500mm

1.0×1.6 (minor axis x major axis) mm

FT-100-K-42-A-250-500-W-N

PFA (fluororesin) green

PFA (fluororesin) 1 green (+ pole), 1 white (- pole)

None

Untreated (no pre-soldering)

±1.5℃ (insertion length 100mm or more)

0~200℃ (temperature measurement part) *No condensation except on the protection tube part

14 seconds (90% of final value) typ.
*Leave it at room temperature, then put it in boiling water at 100℃ and evaluate at 90% of the stability point. The insertion length should be 100mm or more

Φ0.32mm×1 piece

K thermocouple class 1 class

250mm

15mm (excluding 90mm from the tip of the temperature measuring section)

PFA (fluororesin)

PFA (fluororesin)

Outer diameter Φ4mm

500mm

1.0×1.6 (minor axis x major axis) mm

FT-100-K-42-A-250-500-Y3-AW

PFA (fluororesin) green

PFA (fluororesin) 1 green (+ pole), 1 white (- pole)

Pure water cleaning + clean pack treatment

Y lug (for M3)

±1.5℃ (insertion length 100mm or more)

0~200℃ (temperature measurement part) *No condensation except on the protection tube part

14 seconds (90% of final value) typ.
*Leave it at room temperature, then put it in boiling water at 100℃ and evaluate at 90% of the stability point. The insertion length should be 100mm or more

Φ0.32mm×1 piece

K thermocouple class 1 class

250mm

15mm (excluding 90mm from the tip of the temperature measuring section)

PFA (fluororesin)

PFA (fluororesin)

Outer diameter Φ4mm

500mm

1.0×1.6 (minor axis x major axis) mm

FT-100-K-42-A-250-500-Y3-N

PFA (fluororesin) green

PFA (fluororesin) 1 green (+ pole), 1 white (- pole)

None

Y lug (for M3)

±1.5℃ (insertion length 100mm or more)

0~200℃ (temperature measurement part) *No condensation except on the protection tube part

14 seconds (90% of final value) typ.
*Leave it at room temperature, then put it in boiling water at 100℃ and evaluate at 90% of the stability point. The insertion length should be 100mm or more

Φ0.32mm×1 piece

K thermocouple class 1 class

250mm

15mm (excluding 90mm from the tip of the temperature measuring section)

PFA (fluororesin)

PFA (fluororesin)

Outer diameter Φ4mm

500mm

1.0×1.6 (minor axis x major axis) mm

FT-100-K-42-A-250-500-Y4-AW

PFA (fluororesin) green

PFA (fluororesin) 1 green (+ pole), 1 white (- pole)

Pure water cleaning + clean pack treatment

Y lug (for M4)

±1.5℃ (insertion length 100mm or more)

0~200℃ (temperature measurement part) *No condensation except on the protection tube part

14 seconds (90% of final value) typ.
*Leave it at room temperature, then put it in boiling water at 100℃ and evaluate at 90% of the stability point. The insertion length should be 100mm or more

Φ0.32mm×1 piece

K thermocouple class 1 class

250mm

15mm (excluding 90mm from the tip of the temperature measuring section)

PFA (fluororesin)

PFA (fluororesin)

Outer diameter Φ4mm

500mm

1.0×1.6 (minor axis x major axis) mm

FT-100-K-42-A-250-500-Y4-N

PFA (fluororesin) green

PFA (fluororesin) 1 green (+ pole), 1 white (- pole)

None

Y lug (for M4)

±1.5℃ (insertion length 100mm or more)

0~200℃ (temperature measurement part) *No condensation except on the protection tube part

14 seconds (90% of final value) typ.
*Leave it at room temperature, then put it in boiling water at 100℃ and evaluate at 90% of the stability point. The insertion length should be 100mm or more

Φ0.32mm×1 piece

K thermocouple class 1 class

250mm

15mm (excluding 90mm from the tip of the temperature measuring section)

PFA (fluororesin)

PFA (fluororesin)

Outer diameter Φ4mm

500mm

1.0×1.6 (minor axis x major axis) mm

FT-100-K-42-A-250-500-R3-AW

PFA (fluororesin) green

PFA (fluororesin) 1 green (+ pole), 1 white (- pole)

Pure water cleaning + clean pack treatment

Round lug (for M3)

±1.5℃ (insertion length 100mm or more)

0~200℃ (temperature measurement part) *No condensation except on the protection tube part

14 seconds (90% of final value) typ.
*Leave it at room temperature, then put it in boiling water at 100℃ and evaluate at 90% of the stability point. The insertion length should be 100mm or more

Φ0.32mm×1 piece

K thermocouple class 1 class

250mm

15mm (excluding 90mm from the tip of the temperature measuring section)

PFA (fluororesin)

PFA (fluororesin)

Outer diameter Φ4mm

500mm

1.0×1.6 (minor axis x major axis) mm

FT-100-K-42-A-250-500-R3-N

PFA (fluororesin) green

PFA (fluororesin) 1 green (+ pole), 1 white (- pole)

None

Round lug (for M3)

±1.5℃ (insertion length 100mm or more)

0~200℃ (temperature measurement part) *No condensation except on the protection tube part

14 seconds (90% of final value) typ.
*Leave it at room temperature, then put it in boiling water at 100℃ and evaluate at 90% of the stability point. The insertion length should be 100mm or more

Φ0.32mm×1 piece

K thermocouple class 1 class

250mm

15mm (excluding 90mm from the tip of the temperature measuring section)

PFA (fluororesin)

PFA (fluororesin)

Outer diameter Φ4mm

500mm

1.0×1.6 (minor axis x major axis) mm

FT-100-K-42-A-250-500-R4-AW

PFA (fluororesin) green

PFA (fluororesin) 1 green (+ pole), 1 white (- pole)

Pure water cleaning + clean pack treatment

Round lug (for M4)

±1.5℃ (insertion length 100mm or more)

0~200℃ (temperature measurement part) *No condensation except on the protection tube part

14 seconds (90% of final value) typ.
*Leave it at room temperature, then put it in boiling water at 100℃ and evaluate at 90% of the stability point. The insertion length should be 100mm or more

Φ0.32mm×1 piece

K thermocouple class 1 class

250mm

15mm (excluding 90mm from the tip of the temperature measuring section)

PFA (fluororesin)

PFA (fluororesin)

Outer diameter Φ4mm

500mm

1.0×1.6 (minor axis x major axis) mm

FT-100-K-42-A-250-500-R4-N

PFA (fluororesin) green

PFA (fluororesin) 1 green (+ pole), 1 white (- pole)

None

Round lug (for M4)

±1.5℃ (insertion length 100mm or more)

0~200℃ (temperature measurement part) *No condensation except on the protection tube part

14 seconds (90% of final value) typ.
*Leave it at room temperature, then put it in boiling water at 100℃ and evaluate at 90% of the stability point. The insertion length should be 100mm or more

Φ0.32mm×1 piece

K thermocouple class 1 class

250mm

15mm (excluding 90mm from the tip of the temperature measuring section)

PFA (fluororesin)

PFA (fluororesin)

Outer diameter Φ4mm

500mm

1.0×1.6 (minor axis x major axis) mm