Hybrid recorder SBR-EW100 / EW180
RKC INSTRUMENT
About This Product
Adds a sense of perfection to the ease of paper records.
■Multi-display allows you to check data at a glance
- You can choose from 80 different display patterns, including digital display of measured values and bar graph display.
- Up to 15 types of display patterns can be registered and the display can be switched with one touch using the "DISP" key.
■Two sizes available
Two types of front dimensions are available: 144 x 144 mm and 288 x 288 mm.
■Achieving excellent operability
- Equipped with a large VFD full dot display.
- Equipped with a function to take out recording paper during recording.
- Interactive settings using navigation display.
・Equipped with high-brightness LED internal lighting as standard.
■Keeps compatibility with conventional products (EY series)
・Conventional EY series spare parts (pens, cartridges, recording paper) can continue to be used as is.
・Both the back terminal arrangement (*) and instrument depth size follow the conventional EY series. (*) Includes some improvements
■Equipped with functions that meet diverse needs
・Various lineup (1, 2, 3, 4 pens, 6, 12, 18, 24 dots) *12, 18, 24 dots are available only in SBR-EW180
・Achieved a measurement cycle of 1 second with the high-speed recording 6-dot model.
・Universal input specifications.
- Compatible with special sensor types (35 types including PLⅡ, PR40-20, etc.). (optional)
・Can be equipped with calculation functions. (optional)
・Number of calculation channels: Pen model 8ch, dot model max. 12ch (EW100) max. 24ch (EW180)
・Calculation type: General-purpose calculation, statistical calculation *Calculation results can be recorded on chart paper
- Compatible with general purpose communication RS-422A/485. (optional)
■You can write notes and check data even while recording.
The chart cassette is additionally equipped with a function to take out recorded chart paper. Even while recording, you can easily check past data and write notes.
■High precision and high reliability of mechanical drive parts
The pen servo section has been changed from the conventional belt drive system to an ultra-compact stepping motor and rack & pinion system. Furthermore, the position detection method has been changed to a non-contact optical encoding method. Achieved longer life and improved reproducibility.
*Other product numbers are available.
-
Product
Hybrid recorder SBR-EW100 / EW180
-
Handling Company
RKC INSTRUMENT
-
Categories
10 Models of Hybrid recorder SBR-EW100 / EW180
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Bar graph display | Brightness settings | Burnout | Chart paper feed speed | Chart paper feed speed change | Display content | Display method | Display update cycle | Dot model resolution | Effective recording width | Filter function | Input calculation function | Input external resistance | Input resistance | Language display | Measurement period | Memory backup | Operating temperature and humidity range | Paper feed accuracy | Pen model dead band | Power frequency | RTD input | Rated power supply voltage | Recording accuracy | Recording cycle | Recording method | Recording paper length | Setting screen display | Type | Usable power supply voltage range |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SBR-EW101-1 |
Available upon quote |
Measured value: Can display left/right edge reference or center zero bar graph *Can be specified for each channel Alarm: Alarm set point display and alarm point display |
Brightness level configurable |
Detected for TC, DCV (1~5V) *Detection ON/OFF switchable for each channel *1~5V range burnout below 0.2V |
5~12,000mm/h (82 steps) | Speed 1/Speed 2 can be switched by remote control (optional) | Digital display, bar graph, flag display, DI/DO status, date/time, etc. *Display settings can be registered in up to 15 formats from approximately 80 formats. | VFD (101×16 dot matrix) |
AUTO: 1~5 seconds MAN: 2 seconds (pen model), linked to measurement cycle (dot model) *AUTO/MAN switchable |
- | 100mm |
Signal damping ON/OFF can be specified for each channel *Time constant: Specify from 2, 5, or 10 seconds |
Channel difference, linear scaling, square root calculation (with low cut function), bias (arithmetic addition) | DC voltage, thermocouple input: 2kΩ or less |
Voltage range below 200mVDC and thermocouple: 10MΩ or above Voltage range above 2VDC: approx. 1MΩ |
Japanese display | 0.125 seconds for all channels |
Set value and clock operation protected by lithium battery Lithium battery life: 10 years (23±2℃ 55±10%RH) |
0~50℃, 20~80%RH (at 5~40℃) | Within ±0.1% *However, if the feed is more than 1,000 mm, the print scale is based on the recording paper. | Less than 0.2% of recording span | 50Hz/60Hz (automatic switching) | 1 wire 10Ω or less (all 3 wires must be equal) | 100~240VAC (automatic switching) |
Measurement accuracy ± (0.3% of recording span) Record span: 100mm |
Continuous recording for each channel | Disposable felt pen, plotter pen | 16m (folding) |
Interactive display of various recorder settings *When setting various settings, navigation to support settings is displayed at the bottom of the display. |
SBR-EW100 1 pen recorder | 90~132VAC, 180~264VAC |
|
|
SBR-EW102-1 |
Available upon quote |
Measured value: Can display left/right edge reference or center zero bar graph *Can be specified for each channel Alarm: Alarm set point display and alarm point display |
Brightness level configurable |
Detected for TC, DCV (1~5V) *Detection ON/OFF switchable for each channel *1~5V range burnout below 0.2V |
5~12,000mm/h (82 steps) | Speed 1/Speed 2 can be switched by remote control (optional) | Digital display, bar graph, flag display, DI/DO status, date/time, etc. *Display settings can be registered in up to 15 formats from approximately 80 formats. | VFD (101×16 dot matrix) |
AUTO: 1~5 seconds MAN: 2 seconds (pen model), linked to measurement cycle (dot model) *AUTO/MAN switchable |
- | 100mm |
Signal damping ON/OFF can be specified for each channel *Time constant: Specify from 2, 5, or 10 seconds |
Channel difference, linear scaling, square root calculation (with low cut function), bias (arithmetic addition) | DC voltage, thermocouple input: 2kΩ or less |
Voltage range below 200mVDC and thermocouple: 10MΩ or above Voltage range above 2VDC: approx. 1MΩ |
Japanese display | 0.125 seconds for all channels |
Set value and clock operation protected by lithium battery Lithium battery life: 10 years (23±2℃ 55±10%RH) |
0~50℃, 20~80%RH (at 5~40℃) | Within ±0.1% *However, if the feed is more than 1,000 mm, the print scale is based on the recording paper. | Less than 0.2% of recording span | 50Hz/60Hz (automatic switching) | 1 wire 10Ω or less (all 3 wires must be equal) | 100~240VAC (automatic switching) |
Measurement accuracy ± (0.3% of recording span) Record span: 100mm |
Continuous recording for each channel | Disposable felt pen, plotter pen | 16m (folding) |
Interactive display of various recorder settings *When setting various settings, navigation to support settings is displayed at the bottom of the display. |
SBR-EW100 2 pen recorder | 90~132VAC, 180~264VAC |
|
|
SBR-EW103-1 |
Available upon quote |
Measured value: Can display left/right edge reference or center zero bar graph *Can be specified for each channel Alarm: Alarm set point display and alarm point display |
Brightness level configurable |
Detected for TC, DCV (1~5V) *Detection ON/OFF switchable for each channel *1~5V range burnout below 0.2V |
5~12,000mm/h (82 steps) | Speed 1/Speed 2 can be switched by remote control (optional) | Digital display, bar graph, flag display, DI/DO status, date/time, etc. *Display settings can be registered in up to 15 formats from approximately 80 formats. | VFD (101×16 dot matrix) |
AUTO: 1~5 seconds MAN: 2 seconds (pen model), linked to measurement cycle (dot model) *AUTO/MAN switchable |
- | 100mm |
Signal damping ON/OFF can be specified for each channel *Time constant: Specify from 2, 5, or 10 seconds |
Channel difference, linear scaling, square root calculation (with low cut function), bias (arithmetic addition) | DC voltage, thermocouple input: 2kΩ or less |
Voltage range below 200mVDC and thermocouple: 10MΩ or above Voltage range above 2VDC: approx. 1MΩ |
Japanese display | 0.125 seconds for all channels |
Set value and clock operation protected by lithium battery Lithium battery life: 10 years (23±2℃ 55±10%RH) |
0~50℃, 20~80%RH (at 5~40℃) | Within ±0.1% *However, if the feed is more than 1,000 mm, the print scale is based on the recording paper. | Less than 0.2% of recording span | 50Hz/60Hz (automatic switching) | 1 wire 10Ω or less (all 3 wires must be equal) | 100~240VAC (automatic switching) |
Measurement accuracy ± (0.3% of recording span) Record span: 100mm |
Continuous recording for each channel | Disposable felt pen, plotter pen | 16m (folding) |
Interactive display of various recorder settings *When setting various settings, navigation to support settings is displayed at the bottom of the display. |
SBR-EW100 3 pen recorder | 90~132VAC, 180~264VAC |
|
|
SBR-EW104-1 |
Available upon quote |
Measured value: Can display left/right edge reference or center zero bar graph *Can be specified for each channel Alarm: Alarm set point display and alarm point display |
Brightness level configurable |
Detected for TC, DCV (1~5V) *Detection ON/OFF switchable for each channel *1~5V range burnout below 0.2V |
5~12,000mm/h (82 steps) | Speed 1/Speed 2 can be switched by remote control (optional) | Digital display, bar graph, flag display, DI/DO status, date/time, etc. *Display settings can be registered in up to 15 formats from approximately 80 formats. | VFD (101×16 dot matrix) |
AUTO: 1~5 seconds MAN: 2 seconds (pen model), linked to measurement cycle (dot model) *AUTO/MAN switchable |
- | 100mm |
Signal damping ON/OFF can be specified for each channel *Time constant: Specify from 2, 5, or 10 seconds |
Channel difference, linear scaling, square root calculation (with low cut function), bias (arithmetic addition) | DC voltage, thermocouple input: 2kΩ or less |
Voltage range below 200mVDC and thermocouple: 10MΩ or above Voltage range above 2VDC: approx. 1MΩ |
Japanese display | 0.125 seconds for all channels |
Set value and clock operation protected by lithium battery Lithium battery life: 10 years (23±2℃ 55±10%RH) |
0~50℃, 20~80%RH (at 5~40℃) | Within ±0.1% *However, if the feed is more than 1,000 mm, the print scale is based on the recording paper. | Less than 0.2% of recording span | 50Hz/60Hz (automatic switching) | 1 wire 10Ω or less (all 3 wires must be equal) | 100~240VAC (automatic switching) |
Measurement accuracy ± (0.3% of recording span) Record span: 100mm |
Continuous recording for each channel | Disposable felt pen, plotter pen | 16m (folding) |
Interactive display of various recorder settings *When setting various settings, navigation to support settings is displayed at the bottom of the display. |
SBR-EW100 4 pen recorder | 90~132VAC, 180~264VAC |
|
|
SBR-EW106-1 |
Available upon quote |
Measured value: Can display left/right edge reference or center zero bar graph *Can be specified for each channel Alarm: Alarm set point display and alarm point display |
Brightness level configurable |
Detected for TC, DCV (1~5V) *Detection ON/OFF switchable for each channel *1~5V range burnout below 0.2V |
1~1,500mm/h (1mm step) | Speed 1/Speed 2 can be switched by remote control (optional) | Digital display, bar graph, flag display, DI/DO status, date/time, etc. *Display settings can be registered in up to 15 formats from approximately 80 formats. | VFD (101×16 dot matrix) |
AUTO: 1~5 seconds MAN: 2 seconds (pen model), linked to measurement cycle (dot model) *AUTO/MAN switchable |
0.1mm | 100mm |
Moving average ON/OFF can be specified for each channel *Moving average number of times: Specify from 2 to 16 times |
Channel difference, linear scaling, square root calculation (with low cut function), bias (arithmetic addition) | DC voltage, thermocouple input: 2kΩ or less |
Voltage range below 200mVDC and thermocouple: 10MΩ or above Voltage range above 2VDC: approx. 1MΩ |
Japanese display | 1 second/6 points |
Set value and clock operation protected by lithium battery Lithium battery life: 10 years (23±2℃ 55±10%RH) |
0~50℃, 20~80%RH (at 5~40℃) | Within ±0.1% *However, if the feed is more than 1,000 mm, the print scale is based on the recording paper. | - | 50Hz/60Hz (automatic switching) | 1 wire 10Ω or less (all 3 wires must be equal) | 100~240VAC (automatic switching) |
Measurement accuracy ± (0.3% of recording span) Record span: 100mm |
6 points/10 seconds *Fastest recording cycle | 6 color wire dots | 16m (folding) |
Interactive display of various recorder settings *When setting various settings, navigation to support settings is displayed at the bottom of the display. |
SBR-EW100 6 RBI recorder | 90~132VAC, 180~264VAC |
|
|
SBR-EW181-1 |
Available upon quote |
Measured value: Can display left/right edge reference or center zero bar graph *Can be specified for each channel Alarm: Alarm set point display and alarm point display |
Brightness level configurable |
Detected for TC, DCV (1~5V) *Detection ON/OFF switchable for each channel *1~5V range burnout below 0.2V |
5~12,000mm/h (82 steps) | Speed 1/Speed 2 can be switched by remote control (optional) | Digital display, bar graph, flag display, DI/DO status, date/time, etc. *Display settings can be registered in up to 15 formats from approximately 80 formats. | VFD (181×16 dot matrix) |
AUTO: 1~5 seconds MAN: 2 seconds (pen model), linked to measurement cycle (dot model) *AUTO/MAN switchable |
- | 180mm |
Signal damping ON/OFF can be specified for each channel *Time constant: Specify from 2, 5, or 10 seconds |
Channel difference, linear scaling, square root calculation (with low cut function), bias (arithmetic addition) | DC voltage, thermocouple input: 2kΩ or less |
Voltage range below 200mVDC and thermocouple: 10MΩ or above Voltage range above 2VDC: approx. 1MΩ |
Japanese display | 0.125 seconds for all channels |
Set value and clock operation protected by lithium battery Lithium battery life: 10 years (23±2℃ 55±10%RH) |
0~50℃, 20~80%RH (at 5~40℃) | Within ±0.1% *However, if the feed is more than 1,000 mm, the print scale is based on the recording paper. | Less than 0.2% of recording span | 50Hz/60Hz (automatic switching) | 1 wire 10Ω or less (all 3 wires must be equal) | 100~240VAC (automatic switching) |
Measurement accuracy ± (0.3% of recording span) Record span: 180mm |
Continuous recording for each channel | Disposable felt pen, plotter pen | 20m (foldable) |
Interactive display of various recorder settings *When setting various settings, navigation to support settings is displayed at the bottom of the display. |
SBR-EW180 1 pen recorder | 90~132VAC, 180~264VAC |
|
|
SBR-EW182-1 |
Available upon quote |
Measured value: Can display left/right edge reference or center zero bar graph *Can be specified for each channel Alarm: Alarm set point display and alarm point display |
Brightness level configurable |
Detected for TC, DCV (1~5V) *Detection ON/OFF switchable for each channel *1~5V range burnout below 0.2V |
5~12,000mm/h (82 steps) | Speed 1/Speed 2 can be switched by remote control (optional) | Digital display, bar graph, flag display, DI/DO status, date/time, etc. *Display settings can be registered in up to 15 formats from approximately 80 formats. | VFD (181×16 dot matrix) |
AUTO: 1~5 seconds MAN: 2 seconds (pen model), linked to measurement cycle (dot model) *AUTO/MAN switchable |
- | 180mm |
Signal damping ON/OFF can be specified for each channel *Time constant: Specify from 2, 5, or 10 seconds |
Channel difference, linear scaling, square root calculation (with low cut function), bias (arithmetic addition) | DC voltage, thermocouple input: 2kΩ or less |
Voltage range below 200mVDC and thermocouple: 10MΩ or above Voltage range above 2VDC: approx. 1MΩ |
Japanese display | 0.125 seconds for all channels |
Set value and clock operation protected by lithium battery Lithium battery life: 10 years (23±2℃ 55±10%RH) |
0~50℃, 20~80%RH (at 5~40℃) | Within ±0.1% *However, if the feed is more than 1,000 mm, the print scale is based on the recording paper. | Less than 0.2% of recording span | 50Hz/60Hz (automatic switching) | 1 wire 10Ω or less (all 3 wires must be equal) | 100~240VAC (automatic switching) |
Measurement accuracy ± (0.3% of recording span) Record span: 180mm |
Continuous recording for each channel | Disposable felt pen, plotter pen | 20m (foldable) |
Interactive display of various recorder settings *When setting various settings, navigation to support settings is displayed at the bottom of the display. |
SBR-EW180 2 pen recorder | 90~132VAC, 180~264VAC |
|
|
SBR-EW183-1 |
Available upon quote |
Measured value: Can display left/right edge reference or center zero bar graph *Can be specified for each channel Alarm: Alarm set point display and alarm point display |
Brightness level configurable |
Detected for TC, DCV (1~5V) *Detection ON/OFF switchable for each channel *1~5V range burnout below 0.2V |
5~12,000mm/h (82 steps) | Speed 1/Speed 2 can be switched by remote control (optional) | Digital display, bar graph, flag display, DI/DO status, date/time, etc. *Display settings can be registered in up to 15 formats from approximately 80 formats. | VFD (181×16 dot matrix) |
AUTO: 1~5 seconds MAN: 2 seconds (pen model), linked to measurement cycle (dot model) *AUTO/MAN switchable |
- | 180mm |
Signal damping ON/OFF can be specified for each channel *Time constant: Specify from 2, 5, or 10 seconds |
Channel difference, linear scaling, square root calculation (with low cut function), bias (arithmetic addition) | DC voltage, thermocouple input: 2kΩ or less |
Voltage range below 200mVDC and thermocouple: 10MΩ or above Voltage range above 2VDC: approx. 1MΩ |
Japanese display | 0.125 seconds for all channels |
Set value and clock operation protected by lithium battery Lithium battery life: 10 years (23±2℃ 55±10%RH) |
0~50℃, 20~80%RH (at 5~40℃) | Within ±0.1% *However, if the feed is more than 1,000 mm, the print scale is based on the recording paper. | Less than 0.2% of recording span | 50Hz/60Hz (automatic switching) | 1 wire 10Ω or less (all 3 wires must be equal) | 100~240VAC (automatic switching) |
Measurement accuracy ± (0.3% of recording span) Record span: 180mm |
Continuous recording for each channel | Disposable felt pen, plotter pen | 20m (foldable) |
Interactive display of various recorder settings *When setting various settings, navigation to support settings is displayed at the bottom of the display. |
SBR-EW180 3 pen recorder | 90~132VAC, 180~264VAC |
|
|
SBR-EW184-1 |
Available upon quote |
Measured value: Can display left/right edge reference or center zero bar graph *Can be specified for each channel Alarm: Alarm set point display and alarm point display |
Brightness level configurable |
Detected for TC, DCV (1~5V) *Detection ON/OFF switchable for each channel *1~5V range burnout below 0.2V |
5~12,000mm/h (82 steps) | Speed 1/Speed 2 can be switched by remote control (optional) | Digital display, bar graph, flag display, DI/DO status, date/time, etc. *Display settings can be registered in up to 15 formats from approximately 80 formats. | VFD (181×16 dot matrix) |
AUTO: 1~5 seconds MAN: 2 seconds (pen model), linked to measurement cycle (dot model) *AUTO/MAN switchable |
- | 180mm |
Signal damping ON/OFF can be specified for each channel *Time constant: Specify from 2, 5, or 10 seconds |
Channel difference, linear scaling, square root calculation (with low cut function), bias (arithmetic addition) | DC voltage, thermocouple input: 2kΩ or less |
Voltage range below 200mVDC and thermocouple: 10MΩ or above Voltage range above 2VDC: approx. 1MΩ |
Japanese display | 0.125 seconds for all channels |
Set value and clock operation protected by lithium battery Lithium battery life: 10 years (23±2℃ 55±10%RH) |
0~50℃, 20~80%RH (at 5~40℃) | Within ±0.1% *However, if the feed is more than 1,000 mm, the print scale is based on the recording paper. | Less than 0.2% of recording span | 50Hz/60Hz (automatic switching) | 1 wire 10Ω or less (all 3 wires must be equal) | 100~240VAC (automatic switching) |
Measurement accuracy ± (0.3% of recording span) Record span: 180mm |
Continuous recording for each channel | Disposable felt pen, plotter pen | 20m (foldable) |
Interactive display of various recorder settings *When setting various settings, navigation to support settings is displayed at the bottom of the display. |
SBR-EW180 4 pen recorder | 90~132VAC, 180~264VAC |
|
|
SBR-EW186-1 |
Available upon quote |
Measured value: Can display left/right edge reference or center zero bar graph *Can be specified for each channel Alarm: Alarm set point display and alarm point display |
Brightness level configurable |
Detected for TC, DCV (1~5V) *Detection ON/OFF switchable for each channel *1~5V range burnout below 0.2V |
1~1,500mm/h (1mm step) | Speed 1/Speed 2 can be switched by remote control (optional) | Digital display, bar graph, flag display, DI/DO status, date/time, etc. *Display settings can be registered in up to 15 formats from approximately 80 formats. | VFD (181×16 dot matrix) |
AUTO: 1~5 seconds MAN: 2 seconds (pen model), linked to measurement cycle (dot model) *AUTO/MAN switchable |
0.1mm | 180mm |
Moving average ON/OFF can be specified for each channel *Moving average number of times: Specify from 2 to 16 times |
Channel difference, linear scaling, square root calculation (with low cut function), bias (arithmetic addition) | DC voltage, thermocouple input: 2kΩ or less |
Voltage range below 200mVDC and thermocouple: 10MΩ or above Voltage range above 2VDC: approx. 1MΩ |
Japanese display | 1 second/6 points |
Set value and clock operation protected by lithium battery Lithium battery life: 10 years (23±2℃ 55±10%RH) |
0~50℃, 20~80%RH (at 5~40℃) | Within ±0.1% *However, if the feed is more than 1,000 mm, the print scale is based on the recording paper. | - | 50Hz/60Hz (automatic switching) | 1 wire 10Ω or less (all 3 wires must be equal) | 100~240VAC (automatic switching) |
Measurement accuracy ± (0.3% of recording span) Record span: 180mm |
6 points/10 seconds *Fastest recording cycle | 6 color wire dots | 20m (foldable) |
Interactive display of various recorder settings *When setting various settings, navigation to support settings is displayed at the bottom of the display. |
SBR-EW180 6 RBI recorder | 90~132VAC, 180~264VAC |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of RKC INSTRUMENT
View more products of RKC INSTRUMENT
About Company Handling This Product
- Japan