Paperless recorder VGR-B100
RKC INSTRUMENT

VGR-B103-00

Square root operation on each channel input value

5Ω or less per wire

Recording starts each time the REC button is turned on. Records with a new file name each time recording starts.

SD standard: max. 2GB, SDHC standard: max. 32GB

Select Japanese/English from the setting screen (default setting is English)

16 colors

1 second

Touch panel type 5.7 inch TFT color LCD (320 x 240 dots)

Number of groups: 6 main records, 1 sub record
Number of channels: Up to 12 channels can be displayed in each group

Number of calculation channels: 36 points
Arithmetic operations, general operations, integration operations, and F value operations are possible on each calculation channel.
Calculation details can only be set and checked using the parameter loader software (standard included software).

100ms

SD memory card (compatible with SD/SDHC standards)

Select from preset units or 20 units (up to 8 characters each) that can be created.

Approximately 100MB

DC voltage, DC current (requires shunt resistance), thermocouple, resistance temperature detector

Input mutual isolation

No input/output function

Approximately 0.18μV/Ω

Records each channel data of 6 groups set in display group.
Recorded contents include trend data, event data, and message data.

Thermocouple, standard equipment for mV voltage input. Can be set with or without.

Saves either the average value, instantaneous value, or minimum and maximum measured value from the measurement data sampled in the measurement cycle.

1 second to 60 minutes (100 milliseconds can be selected for sub recording only)

You can choose from either binary or binary + CSV format.

±32,000 (DC voltage (current) input) *Decimal point position can be set arbitrarily

Records each channel data of one group set in display group.
The recorded content is only trend data.
*The recording conditions can be selected from synchronized with main recording, when an alarm occurs, and when DI input.

Analog input signal: 3 points

Alarm information, message record

No RS-485 communication

Can be set from 0 to 99 seconds for each channel

The F value (lethal value of bacteria due to heat sterilization) is calculated for each channel from the measured temperature.
Calculation details can only be set and checked using the parameter loader software (standard included software).

VGR-B103-01

Square root operation on each channel input value

5Ω or less per wire

Recording starts each time the REC button is turned on. Records with a new file name each time recording starts.

SD standard: max. 2GB, SDHC standard: max. 32GB

Select Japanese/English from the setting screen (default setting is English)

16 colors

1 second

Touch panel type 5.7 inch TFT color LCD (320 x 240 dots)

Number of groups: 6 main records, 1 sub record
Number of channels: Up to 12 channels can be displayed in each group

Number of calculation channels: 36 points
Arithmetic operations, general operations, integration operations, and F value operations are possible on each calculation channel.
Calculation details can only be set and checked using the parameter loader software (standard included software).

100ms

SD memory card (compatible with SD/SDHC standards)

Select from preset units or 20 units (up to 8 characters each) that can be created.

Approximately 100MB

DC voltage, DC current (requires shunt resistance), thermocouple, resistance temperature detector

Input mutual isolation

With DI/DO (DI 9 points, DO 12 points)

Approximately 0.18μV/Ω

Records each channel data of 6 groups set in display group.
Recorded contents include trend data, event data, and message data.

Thermocouple, standard equipment for mV voltage input. Can be set with or without.

Saves either the average value, instantaneous value, or minimum and maximum measured value from the measurement data sampled in the measurement cycle.

1 second to 60 minutes (100 milliseconds can be selected for sub recording only)

You can choose from either binary or binary + CSV format.

±32,000 (DC voltage (current) input) *Decimal point position can be set arbitrarily

Records each channel data of one group set in display group.
The recorded content is only trend data.
*The recording conditions can be selected from synchronized with main recording, when an alarm occurs, and when DI input.

Analog input signal: 3 points

Alarm information, message record

No RS-485 communication

Can be set from 0 to 99 seconds for each channel

The F value (lethal value of bacteria due to heat sterilization) is calculated for each channel from the measured temperature.
Calculation details can only be set and checked using the parameter loader software (standard included software).

VGR-B103-02

Square root operation on each channel input value

5Ω or less per wire

Recording starts each time the REC button is turned on. Records with a new file name each time recording starts.

SD standard: max. 2GB, SDHC standard: max. 32GB

Select Japanese/English from the setting screen (default setting is English)

16 colors

1 second

Touch panel type 5.7 inch TFT color LCD (320 x 240 dots)

Number of groups: 6 main records, 1 sub record
Number of channels: Up to 12 channels can be displayed in each group

Number of calculation channels: 36 points
Arithmetic operations, general operations, integration operations, and F value operations are possible on each calculation channel.
Calculation details can only be set and checked using the parameter loader software (standard included software).

100ms

SD memory card (compatible with SD/SDHC standards)

Select from preset units or 20 units (up to 8 characters each) that can be created.

Approximately 100MB

DC voltage, DC current (requires shunt resistance), thermocouple, resistance temperature detector

Input mutual isolation

With relay contact output

Approximately 0.18μV/Ω

Records each channel data of 6 groups set in display group.
Recorded contents include trend data, event data, and message data.

Thermocouple, standard equipment for mV voltage input. Can be set with or without.

Saves either the average value, instantaneous value, or minimum and maximum measured value from the measurement data sampled in the measurement cycle.

1 second to 60 minutes (100 milliseconds can be selected for sub recording only)

You can choose from either binary or binary + CSV format.

±32,000 (DC voltage (current) input) *Decimal point position can be set arbitrarily

Records each channel data of one group set in display group.
The recorded content is only trend data.
*The recording conditions can be selected from synchronized with main recording, when an alarm occurs, and when DI input.

Analog input signal: 3 points

Alarm information, message record

No RS-485 communication

Can be set from 0 to 99 seconds for each channel

The F value (lethal value of bacteria due to heat sterilization) is calculated for each channel from the measured temperature.
Calculation details can only be set and checked using the parameter loader software (standard included software).

VGR-B103-60

Square root operation on each channel input value

5Ω or less per wire

Recording starts each time the REC button is turned on. Records with a new file name each time recording starts.

SD standard: max. 2GB, SDHC standard: max. 32GB

Select Japanese/English from the setting screen (default setting is English)

16 colors

1 second

Touch panel type 5.7 inch TFT color LCD (320 x 240 dots)

Number of groups: 6 main records, 1 sub record
Number of channels: Up to 12 channels can be displayed in each group

Number of calculation channels: 36 points
Arithmetic operations, general operations, integration operations, and F value operations are possible on each calculation channel.
Calculation details can only be set and checked using the parameter loader software (standard included software).

100ms

SD memory card (compatible with SD/SDHC standards)

Select from preset units or 20 units (up to 8 characters each) that can be created.

Approximately 100MB

DC voltage, DC current (requires shunt resistance), thermocouple, resistance temperature detector

Input mutual isolation

No input/output function

Approximately 0.18μV/Ω

Records each channel data of 6 groups set in display group.
Recorded contents include trend data, event data, and message data.

Thermocouple, standard equipment for mV voltage input. Can be set with or without.

Saves either the average value, instantaneous value, or minimum and maximum measured value from the measurement data sampled in the measurement cycle.

1 second to 60 minutes (100 milliseconds can be selected for sub recording only)

You can choose from either binary or binary + CSV format.

±32,000 (DC voltage (current) input) *Decimal point position can be set arbitrarily

Records each channel data of one group set in display group.
The recorded content is only trend data.
*The recording conditions can be selected from synchronized with main recording, when an alarm occurs, and when DI input.

Analog input signal: 3 points

Alarm information, message record

RS-485 communication available

Can be set from 0 to 99 seconds for each channel

The F value (lethal value of bacteria due to heat sterilization) is calculated for each channel from the measured temperature.
Calculation details can only be set and checked using the parameter loader software (standard included software).

VGR-B103-61

Square root operation on each channel input value

5Ω or less per wire

Recording starts each time the REC button is turned on. Records with a new file name each time recording starts.

SD standard: max. 2GB, SDHC standard: max. 32GB

Select Japanese/English from the setting screen (default setting is English)

16 colors

1 second

Touch panel type 5.7 inch TFT color LCD (320 x 240 dots)

Number of groups: 6 main records, 1 sub record
Number of channels: Up to 12 channels can be displayed in each group

Number of calculation channels: 36 points
Arithmetic operations, general operations, integration operations, and F value operations are possible on each calculation channel.
Calculation details can only be set and checked using the parameter loader software (standard included software).

100ms

SD memory card (compatible with SD/SDHC standards)

Select from preset units or 20 units (up to 8 characters each) that can be created.

Approximately 100MB

DC voltage, DC current (requires shunt resistance), thermocouple, resistance temperature detector

Input mutual isolation

With DI/DO (DI 9 points, DO 12 points)

Approximately 0.18μV/Ω

Records each channel data of 6 groups set in display group.
Recorded contents include trend data, event data, and message data.

Thermocouple, standard equipment for mV voltage input. Can be set with or without.

Saves either the average value, instantaneous value, or minimum and maximum measured value from the measurement data sampled in the measurement cycle.

1 second to 60 minutes (100 milliseconds can be selected for sub recording only)

You can choose from either binary or binary + CSV format.

±32,000 (DC voltage (current) input) *Decimal point position can be set arbitrarily

Records each channel data of one group set in display group.
The recorded content is only trend data.
*The recording conditions can be selected from synchronized with main recording, when an alarm occurs, and when DI input.

Analog input signal: 3 points

Alarm information, message record

RS-485 communication available

Can be set from 0 to 99 seconds for each channel

The F value (lethal value of bacteria due to heat sterilization) is calculated for each channel from the measured temperature.
Calculation details can only be set and checked using the parameter loader software (standard included software).

VGR-B103-62

Square root operation on each channel input value

5Ω or less per wire

Recording starts each time the REC button is turned on. Records with a new file name each time recording starts.

SD standard: max. 2GB, SDHC standard: max. 32GB

Select Japanese/English from the setting screen (default setting is English)

16 colors

1 second

Touch panel type 5.7 inch TFT color LCD (320 x 240 dots)

Number of groups: 6 main records, 1 sub record
Number of channels: Up to 12 channels can be displayed in each group

Number of calculation channels: 36 points
Arithmetic operations, general operations, integration operations, and F value operations are possible on each calculation channel.
Calculation details can only be set and checked using the parameter loader software (standard included software).

100ms

SD memory card (compatible with SD/SDHC standards)

Select from preset units or 20 units (up to 8 characters each) that can be created.

Approximately 100MB

DC voltage, DC current (requires shunt resistance), thermocouple, resistance temperature detector

Input mutual isolation

With relay contact output

Approximately 0.18μV/Ω

Records each channel data of 6 groups set in display group.
Recorded contents include trend data, event data, and message data.

Thermocouple, standard equipment for mV voltage input. Can be set with or without.

Saves either the average value, instantaneous value, or minimum and maximum measured value from the measurement data sampled in the measurement cycle.

1 second to 60 minutes (100 milliseconds can be selected for sub recording only)

You can choose from either binary or binary + CSV format.

±32,000 (DC voltage (current) input) *Decimal point position can be set arbitrarily

Records each channel data of one group set in display group.
The recorded content is only trend data.
*The recording conditions can be selected from synchronized with main recording, when an alarm occurs, and when DI input.

Analog input signal: 3 points

Alarm information, message record

RS-485 communication available

Can be set from 0 to 99 seconds for each channel

The F value (lethal value of bacteria due to heat sterilization) is calculated for each channel from the measured temperature.
Calculation details can only be set and checked using the parameter loader software (standard included software).

VGR-B106-00

Square root operation on each channel input value

5Ω or less per wire

Recording starts each time the REC button is turned on. Records with a new file name each time recording starts.

SD standard: max. 2GB, SDHC standard: max. 32GB

Select Japanese/English from the setting screen (default setting is English)

16 colors

1 second

Touch panel type 5.7 inch TFT color LCD (320 x 240 dots)

Number of groups: 6 main records, 1 sub record
Number of channels: Up to 12 channels can be displayed in each group

Number of calculation channels: 36 points
Arithmetic operations, general operations, integration operations, and F value operations are possible on each calculation channel.
Calculation details can only be set and checked using the parameter loader software (standard included software).

100ms

SD memory card (compatible with SD/SDHC standards)

Select from preset units or 20 units (up to 8 characters each) that can be created.

Approximately 100MB

DC voltage, DC current (requires shunt resistance), thermocouple, resistance temperature detector

Input mutual isolation

No input/output function

Approximately 0.18μV/Ω

Records each channel data of 6 groups set in display group.
Recorded contents include trend data, event data, and message data.

Thermocouple, standard equipment for mV voltage input. Can be set with or without.

Saves either the average value, instantaneous value, or minimum and maximum measured value from the measurement data sampled in the measurement cycle.

1 second to 60 minutes (100 milliseconds can be selected for sub recording only)

You can choose from either binary or binary + CSV format.

±32,000 (DC voltage (current) input) *Decimal point position can be set arbitrarily

Records each channel data of one group set in display group.
The recorded content is only trend data.
*The recording conditions can be selected from synchronized with main recording, when an alarm occurs, and when DI input.

Analog input signal: 6 points

Alarm information, message record

No RS-485 communication

Can be set from 0 to 99 seconds for each channel

The F value (lethal value of bacteria due to heat sterilization) is calculated for each channel from the measured temperature.
Calculation details can only be set and checked using the parameter loader software (standard included software).

VGR-B106-01

Square root operation on each channel input value

5Ω or less per wire

Recording starts each time the REC button is turned on. Records with a new file name each time recording starts.

SD standard: max. 2GB, SDHC standard: max. 32GB

Select Japanese/English from the setting screen (default setting is English)

16 colors

1 second

Touch panel type 5.7 inch TFT color LCD (320 x 240 dots)

Number of groups: 6 main records, 1 sub record
Number of channels: Up to 12 channels can be displayed in each group

Number of calculation channels: 36 points
Arithmetic operations, general operations, integration operations, and F value operations are possible on each calculation channel.
Calculation details can only be set and checked using the parameter loader software (standard included software).

100ms

SD memory card (compatible with SD/SDHC standards)

Select from preset units or 20 units (up to 8 characters each) that can be created.

Approximately 100MB

DC voltage, DC current (requires shunt resistance), thermocouple, resistance temperature detector

Input mutual isolation

With DI/DO (DI 9 points, DO 12 points)

Approximately 0.18μV/Ω

Records each channel data of 6 groups set in display group.
Recorded contents include trend data, event data, and message data.

Thermocouple, standard equipment for mV voltage input. Can be set with or without.

Saves either the average value, instantaneous value, or minimum and maximum measured value from the measurement data sampled in the measurement cycle.

1 second to 60 minutes (100 milliseconds can be selected for sub recording only)

You can choose from either binary or binary + CSV format.

±32,000 (DC voltage (current) input) *Decimal point position can be set arbitrarily

Records each channel data of one group set in display group.
The recorded content is only trend data.
*The recording conditions can be selected from synchronized with main recording, when an alarm occurs, and when DI input.

Analog input signal: 6 points

Alarm information, message record

No RS-485 communication

Can be set from 0 to 99 seconds for each channel

The F value (lethal value of bacteria due to heat sterilization) is calculated for each channel from the measured temperature.
Calculation details can only be set and checked using the parameter loader software (standard included software).

VGR-B106-02

Square root operation on each channel input value

5Ω or less per wire

Recording starts each time the REC button is turned on. Records with a new file name each time recording starts.

SD standard: max. 2GB, SDHC standard: max. 32GB

Select Japanese/English from the setting screen (default setting is English)

16 colors

1 second

Touch panel type 5.7 inch TFT color LCD (320 x 240 dots)

Number of groups: 6 main records, 1 sub record
Number of channels: Up to 12 channels can be displayed in each group

Number of calculation channels: 36 points
Arithmetic operations, general operations, integration operations, and F value operations are possible on each calculation channel.
Calculation details can only be set and checked using the parameter loader software (standard included software).

100ms

SD memory card (compatible with SD/SDHC standards)

Select from preset units or 20 units (up to 8 characters each) that can be created.

Approximately 100MB

DC voltage, DC current (requires shunt resistance), thermocouple, resistance temperature detector

Input mutual isolation

With relay contact output

Approximately 0.18μV/Ω

Records each channel data of 6 groups set in display group.
Recorded contents include trend data, event data, and message data.

Thermocouple, standard equipment for mV voltage input. Can be set with or without.

Saves either the average value, instantaneous value, or minimum and maximum measured value from the measurement data sampled in the measurement cycle.

1 second to 60 minutes (100 milliseconds can be selected for sub recording only)

You can choose from either binary or binary + CSV format.

±32,000 (DC voltage (current) input) *Decimal point position can be set arbitrarily

Records each channel data of one group set in display group.
The recorded content is only trend data.
*The recording conditions can be selected from synchronized with main recording, when an alarm occurs, and when DI input.

Analog input signal: 6 points

Alarm information, message record

No RS-485 communication

Can be set from 0 to 99 seconds for each channel

The F value (lethal value of bacteria due to heat sterilization) is calculated for each channel from the measured temperature.
Calculation details can only be set and checked using the parameter loader software (standard included software).

VGR-B106-60

Square root operation on each channel input value

5Ω or less per wire

Recording starts each time the REC button is turned on. Records with a new file name each time recording starts.

SD standard: max. 2GB, SDHC standard: max. 32GB

Select Japanese/English from the setting screen (default setting is English)

16 colors

1 second

Touch panel type 5.7 inch TFT color LCD (320 x 240 dots)

Number of groups: 6 main records, 1 sub record
Number of channels: Up to 12 channels can be displayed in each group

Number of calculation channels: 36 points
Arithmetic operations, general operations, integration operations, and F value operations are possible on each calculation channel.
Calculation details can only be set and checked using the parameter loader software (standard included software).

100ms

SD memory card (compatible with SD/SDHC standards)

Select from preset units or 20 units (up to 8 characters each) that can be created.

Approximately 100MB

DC voltage, DC current (requires shunt resistance), thermocouple, resistance temperature detector

Input mutual isolation

No input/output function

Approximately 0.18μV/Ω

Records each channel data of 6 groups set in display group.
Recorded contents include trend data, event data, and message data.

Thermocouple, standard equipment for mV voltage input. Can be set with or without.

Saves either the average value, instantaneous value, or minimum and maximum measured value from the measurement data sampled in the measurement cycle.

1 second to 60 minutes (100 milliseconds can be selected for sub recording only)

You can choose from either binary or binary + CSV format.

±32,000 (DC voltage (current) input) *Decimal point position can be set arbitrarily

Records each channel data of one group set in display group.
The recorded content is only trend data.
*The recording conditions can be selected from synchronized with main recording, when an alarm occurs, and when DI input.

Analog input signal: 6 points

Alarm information, message record

RS-485 communication available

Can be set from 0 to 99 seconds for each channel

The F value (lethal value of bacteria due to heat sterilization) is calculated for each channel from the measured temperature.
Calculation details can only be set and checked using the parameter loader software (standard included software).