Digital indicator AG500-AG500-4*N-N-N-N-NN

Digital indicator AG500
RKC INSTRUMENT

RKC INSTRUMENT's Response Status

Response Rate

100.0%

Response Time

11.4hours

Fast Response

About This Product

■Large and clear display- Equipped with a large and bright 5-digit LED display that can be clearly read even from a distance.
- In the event of an abnormality such as when an alarm occurs, the measured value and alarm character are displayed alternately.

■Slim depth 60mmAchieves approximately half the depth while maintaining the functionality of conventional products. Contributes to reducing installation space inside the panel.

■Complete input/output functions (optional)It can be equipped with up to 2 external contact inputs, up to 6 digital outputs, 1 analog output, and communication functions all at the same time, which are convenient for linking with peripheral devices.

■Can be equipped with a power supply for sensors (optional)A power supply for the sensor can be installed.
*When equipped with a 24V DC power supply for sensor supply, the maximum number of alarm output points is 2 points.
*When equipped with a 12V DC power supply for sensor supply, the maximum number of alarm output points is 5.

■Equipped with various functions as standard (alarm function)・Interlock: When an alarm is output, this is a function that continues to maintain the alarm output even if the alarm returns to the normal range. It is also possible to reset the interlock status using external contact input.
・Delay timer: This is a function that turns on the alarm output after a set time even if the measured value falls within the alarm range.
・Standby operation: Even if the measured value is in the alarm range when the power is turned on, the alarm output (function) is disabled until it once enters the normal range. If an alarm occurs because the temperature when the power is turned on is low, such as room temperature, it is used as a standby alarm until the temperature rises.
- Energized/de-energized operation selection: You can select the relay contact operation when the alarm output is ON/OFF.

■Display function・Peak/Bottom Hold: Always remembers the maximum and minimum measured values. It is also possible to reset the hold state using external contact input.
・PV bias/PV ratio: A function that forcibly adds/subtracts the display to the input and displays it, or forcibly changes the display gain to the input.

*Other product numbers are available.

Model
There are 10 models available for this product.

Product
Digital indicator AG500

Handling Company
RKC INSTRUMENT

Categories

Meters & Instruments

Voltmeters

Meters & Instruments

Ammeters

Measuring Equipment

Indicator Gauges

410+ people viewing

Last viewed: 1 hour ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Digital indicator AG500

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Power supply voltage	Dust-proof/splash-proof structure	Applicable standards	Communication	Mass	Alarm output	Permissible ambient humidity	Permissible ambient temperature	Display digits	Withstand voltage	Insulation resistance	Inrush current	Power consumption	External power supply (for LED drive/sensor supply)	External contact input	Factory settings	Input impedance	Effects of power outage	Memory backup	Bottom hold	Flashing display function	Peak hold	Digital filter	Sampling period	Analog output	PV ratio	PV bias
AG500-4*N-N-N-N-NN	Available upon quote	AC100~240V	Dustproof/splashproof structure: IP66 NEMA4X *However, only in the front direction when installing the panel.	UL/cUL standards, CE mark, RCM mark	No communication function	Approximately 190g	No alarm output	5~95%RH (no condensation) Absolute humidity: MAX.W.C29g/m3 dry air at 101.3kPa	-10~50℃	5 digits (most significant digit is -1 or 1)	Between measurement terminal and ground: AC1500V for 1 minute Between power terminal and ground: AC1500V for 1 minute	Between measurement terminal and ground 500V DC 20MΩ or more Between power terminal and ground: DC500V 20MΩ or more Between power supply terminal and measurement terminal 500V DC 20MΩ or more	12A or less	7.0VA or less at AC100V 10.8VA or less at AC240V	No external power supply	No external contact input	None	High voltage input: about 1MΩ Temperature/low voltage input: Approximately 1MΩ or more Current input: approx. 50Ω	Operation is not affected by power outages of 20msec or less. However, any further power outage will return to the initial state.	Data retained by FRAM (approximately 10 years) *Number of rewrites: Approximately 10 billion times	Holds the minimum value of the measured value. Can be reset by key operation/external contact/communication Hold value backup is not possible when the instrument power is OFF.	Flashing display when input error or event occurs *Events 1 to 6 can be individually specified.	Holds the maximum value of the measured value.	0.0~100.0 seconds (digital filter OFF when set to 0.0)	0.25 seconds	No analog output function	0.500~1.500	-Input span~+Input span
AG500-4*N-N-N-N-4N	Available upon quote	AC100~240V	Dustproof/splashproof structure: IP66 NEMA4X *However, only in the front direction when installing the panel.	UL/cUL standards, CE mark, RCM mark	RS-422A	Approximately 190g	No alarm output	5~95%RH (no condensation) Absolute humidity: MAX.W.C29g/m3 dry air at 101.3kPa	-10~50℃	5 digits (most significant digit is -1 or 1)	Between measurement terminal and ground: AC1500V for 1 minute Between power terminal and ground: AC1500V for 1 minute	Between measurement terminal and ground 500V DC 20MΩ or more Between power terminal and ground: DC500V 20MΩ or more Between power supply terminal and measurement terminal 500V DC 20MΩ or more	12A or less	7.0VA or less at AC100V 10.8VA or less at AC240V	No external power supply	No external contact input	None	High voltage input: about 1MΩ Temperature/low voltage input: Approximately 1MΩ or more Current input: approx. 50Ω	Operation is not affected by power outages of 20msec or less. However, any further power outage will return to the initial state.	Data retained by FRAM (approximately 10 years) *Number of rewrites: Approximately 10 billion times	Holds the minimum value of the measured value. Can be reset by key operation/external contact/communication Hold value backup is not possible when the instrument power is OFF.	Flashing display when input error or event occurs *Events 1 to 6 can be individually specified.	Holds the maximum value of the measured value.	0.0~100.0 seconds (digital filter OFF when set to 0.0)	0.25 seconds	No analog output function	0.500~1.500	-Input span~+Input span
AG500-4*N-N-N-N-5N	Available upon quote	AC100~240V	Dustproof/splashproof structure: IP66 NEMA4X *However, only in the front direction when installing the panel.	UL/cUL standards, CE mark, RCM mark	RS-485	Approximately 190g	No alarm output	5~95%RH (no condensation) Absolute humidity: MAX.W.C29g/m3 dry air at 101.3kPa	-10~50℃	5 digits (most significant digit is -1 or 1)	Between measurement terminal and ground: AC1500V for 1 minute Between power terminal and ground: AC1500V for 1 minute	Between measurement terminal and ground 500V DC 20MΩ or more Between power terminal and ground: DC500V 20MΩ or more Between power supply terminal and measurement terminal 500V DC 20MΩ or more	12A or less	7.0VA or less at AC100V 10.8VA or less at AC240V	No external power supply	No external contact input	None	High voltage input: about 1MΩ Temperature/low voltage input: Approximately 1MΩ or more Current input: approx. 50Ω	Operation is not affected by power outages of 20msec or less. However, any further power outage will return to the initial state.	Data retained by FRAM (approximately 10 years) *Number of rewrites: Approximately 10 billion times	Holds the minimum value of the measured value. Can be reset by key operation/external contact/communication Hold value backup is not possible when the instrument power is OFF.	Flashing display when input error or event occurs *Events 1 to 6 can be individually specified.	Holds the maximum value of the measured value.	0.0~100.0 seconds (digital filter OFF when set to 0.0)	0.25 seconds	No analog output function	0.500~1.500	-Input span~+Input span
AG500-4*N-N-N-1-NN	Available upon quote	AC100~240V	Dustproof/splashproof structure: IP66 NEMA4X *However, only in the front direction when installing the panel.	UL/cUL standards, CE mark, RCM mark	No communication function	Approximately 190g	No alarm output	5~95%RH (no condensation) Absolute humidity: MAX.W.C29g/m3 dry air at 101.3kPa	-10~50℃	5 digits (most significant digit is -1 or 1)	Between measurement terminal and ground: AC1500V for 1 minute Between power terminal and ground: AC1500V for 1 minute	Between measurement terminal and ground 500V DC 20MΩ or more Between power terminal and ground: DC500V 20MΩ or more Between power supply terminal and measurement terminal 500V DC 20MΩ or more	12A or less	7.0VA or less at AC100V 10.8VA or less at AC240V	No external power supply	No external contact input	None	High voltage input: about 1MΩ Temperature/low voltage input: Approximately 1MΩ or more Current input: approx. 50Ω	Operation is not affected by power outages of 20msec or less. However, any further power outage will return to the initial state.	Data retained by FRAM (approximately 10 years) *Number of rewrites: Approximately 10 billion times	Holds the minimum value of the measured value. Can be reset by key operation/external contact/communication Hold value backup is not possible when the instrument power is OFF.	Flashing display when input error or event occurs *Events 1 to 6 can be individually specified.	Holds the maximum value of the measured value.	0.0~100.0 seconds (digital filter OFF when set to 0.0)	0.25 seconds	DC 0~10mV	0.500~1.500	-Input span~+Input span
AG500-4*N-N-N-1-4N	Available upon quote	AC100~240V	Dustproof/splashproof structure: IP66 NEMA4X *However, only in the front direction when installing the panel.	UL/cUL standards, CE mark, RCM mark	RS-422A	Approximately 190g	No alarm output	5~95%RH (no condensation) Absolute humidity: MAX.W.C29g/m3 dry air at 101.3kPa	-10~50℃	5 digits (most significant digit is -1 or 1)	Between measurement terminal and ground: AC1500V for 1 minute Between power terminal and ground: AC1500V for 1 minute	Between measurement terminal and ground 500V DC 20MΩ or more Between power terminal and ground: DC500V 20MΩ or more Between power supply terminal and measurement terminal 500V DC 20MΩ or more	12A or less	7.0VA or less at AC100V 10.8VA or less at AC240V	No external power supply	No external contact input	None	High voltage input: about 1MΩ Temperature/low voltage input: Approximately 1MΩ or more Current input: approx. 50Ω	Operation is not affected by power outages of 20msec or less. However, any further power outage will return to the initial state.	Data retained by FRAM (approximately 10 years) *Number of rewrites: Approximately 10 billion times	Holds the minimum value of the measured value. Can be reset by key operation/external contact/communication Hold value backup is not possible when the instrument power is OFF.	Flashing display when input error or event occurs *Events 1 to 6 can be individually specified.	Holds the maximum value of the measured value.	0.0~100.0 seconds (digital filter OFF when set to 0.0)	0.25 seconds	DC 0~10mV	0.500~1.500	-Input span~+Input span
AG500-4*N-N-N-1-5N	Available upon quote	AC100~240V	Dustproof/splashproof structure: IP66 NEMA4X *However, only in the front direction when installing the panel.	UL/cUL standards, CE mark, RCM mark	RS-485	Approximately 190g	No alarm output	5~95%RH (no condensation) Absolute humidity: MAX.W.C29g/m3 dry air at 101.3kPa	-10~50℃	5 digits (most significant digit is -1 or 1)	Between measurement terminal and ground: AC1500V for 1 minute Between power terminal and ground: AC1500V for 1 minute	Between measurement terminal and ground 500V DC 20MΩ or more Between power terminal and ground: DC500V 20MΩ or more Between power supply terminal and measurement terminal 500V DC 20MΩ or more	12A or less	7.0VA or less at AC100V 10.8VA or less at AC240V	No external power supply	No external contact input	None	High voltage input: about 1MΩ Temperature/low voltage input: Approximately 1MΩ or more Current input: approx. 50Ω	Operation is not affected by power outages of 20msec or less. However, any further power outage will return to the initial state.	Data retained by FRAM (approximately 10 years) *Number of rewrites: Approximately 10 billion times	Holds the minimum value of the measured value. Can be reset by key operation/external contact/communication Hold value backup is not possible when the instrument power is OFF.	Flashing display when input error or event occurs *Events 1 to 6 can be individually specified.	Holds the maximum value of the measured value.	0.0~100.0 seconds (digital filter OFF when set to 0.0)	0.25 seconds	DC 0~10mV	0.500~1.500	-Input span~+Input span
AG500-4*N-N-N-2-NN	Available upon quote	AC100~240V	Dustproof/splashproof structure: IP66 NEMA4X *However, only in the front direction when installing the panel.	UL/cUL standards, CE mark, RCM mark	No communication function	Approximately 190g	No alarm output	5~95%RH (no condensation) Absolute humidity: MAX.W.C29g/m3 dry air at 101.3kPa	-10~50℃	5 digits (most significant digit is -1 or 1)	Between measurement terminal and ground: AC1500V for 1 minute Between power terminal and ground: AC1500V for 1 minute	Between measurement terminal and ground 500V DC 20MΩ or more Between power terminal and ground: DC500V 20MΩ or more Between power supply terminal and measurement terminal 500V DC 20MΩ or more	12A or less	7.0VA or less at AC100V 10.8VA or less at AC240V	No external power supply	No external contact input	None	High voltage input: about 1MΩ Temperature/low voltage input: Approximately 1MΩ or more Current input: approx. 50Ω	Operation is not affected by power outages of 20msec or less. However, any further power outage will return to the initial state.	Data retained by FRAM (approximately 10 years) *Number of rewrites: Approximately 10 billion times	Holds the minimum value of the measured value. Can be reset by key operation/external contact/communication Hold value backup is not possible when the instrument power is OFF.	Flashing display when input error or event occurs *Events 1 to 6 can be individually specified.	Holds the maximum value of the measured value.	0.0~100.0 seconds (digital filter OFF when set to 0.0)	0.25 seconds	DC 0~100mV	0.500~1.500	-Input span~+Input span
AG500-4*N-N-N-2-4N	Available upon quote	AC100~240V	Dustproof/splashproof structure: IP66 NEMA4X *However, only in the front direction when installing the panel.	UL/cUL standards, CE mark, RCM mark	RS-422A	Approximately 190g	No alarm output	5~95%RH (no condensation) Absolute humidity: MAX.W.C29g/m3 dry air at 101.3kPa	-10~50℃	5 digits (most significant digit is -1 or 1)	Between measurement terminal and ground: AC1500V for 1 minute Between power terminal and ground: AC1500V for 1 minute	Between measurement terminal and ground 500V DC 20MΩ or more Between power terminal and ground: DC500V 20MΩ or more Between power supply terminal and measurement terminal 500V DC 20MΩ or more	12A or less	7.0VA or less at AC100V 10.8VA or less at AC240V	No external power supply	No external contact input	None	High voltage input: about 1MΩ Temperature/low voltage input: Approximately 1MΩ or more Current input: approx. 50Ω	Operation is not affected by power outages of 20msec or less. However, any further power outage will return to the initial state.	Data retained by FRAM (approximately 10 years) *Number of rewrites: Approximately 10 billion times	Holds the minimum value of the measured value. Can be reset by key operation/external contact/communication Hold value backup is not possible when the instrument power is OFF.	Flashing display when input error or event occurs *Events 1 to 6 can be individually specified.	Holds the maximum value of the measured value.	0.0~100.0 seconds (digital filter OFF when set to 0.0)	0.25 seconds	DC 0~100mV	0.500~1.500	-Input span~+Input span
AG500-4*N-N-N-2-5N	Available upon quote	AC100~240V	Dustproof/splashproof structure: IP66 NEMA4X *However, only in the front direction when installing the panel.	UL/cUL standards, CE mark, RCM mark	RS-485	Approximately 190g	No alarm output	5~95%RH (no condensation) Absolute humidity: MAX.W.C29g/m3 dry air at 101.3kPa	-10~50℃	5 digits (most significant digit is -1 or 1)	Between measurement terminal and ground: AC1500V for 1 minute Between power terminal and ground: AC1500V for 1 minute	Between measurement terminal and ground 500V DC 20MΩ or more Between power terminal and ground: DC500V 20MΩ or more Between power supply terminal and measurement terminal 500V DC 20MΩ or more	12A or less	7.0VA or less at AC100V 10.8VA or less at AC240V	No external power supply	No external contact input	None	High voltage input: about 1MΩ Temperature/low voltage input: Approximately 1MΩ or more Current input: approx. 50Ω	Operation is not affected by power outages of 20msec or less. However, any further power outage will return to the initial state.	Data retained by FRAM (approximately 10 years) *Number of rewrites: Approximately 10 billion times	Holds the minimum value of the measured value. Can be reset by key operation/external contact/communication Hold value backup is not possible when the instrument power is OFF.	Flashing display when input error or event occurs *Events 1 to 6 can be individually specified.	Holds the maximum value of the measured value.	0.0~100.0 seconds (digital filter OFF when set to 0.0)	0.25 seconds	DC 0~100mV	0.500~1.500	-Input span~+Input span
AG500-4*N-N-N-3-NN	Available upon quote	AC100~240V	Dustproof/splashproof structure: IP66 NEMA4X *However, only in the front direction when installing the panel.	UL/cUL standards, CE mark, RCM mark	No communication function	Approximately 190g	No alarm output	5~95%RH (no condensation) Absolute humidity: MAX.W.C29g/m3 dry air at 101.3kPa	-10~50℃	5 digits (most significant digit is -1 or 1)	Between measurement terminal and ground: AC1500V for 1 minute Between power terminal and ground: AC1500V for 1 minute	Between measurement terminal and ground 500V DC 20MΩ or more Between power terminal and ground: DC500V 20MΩ or more Between power supply terminal and measurement terminal 500V DC 20MΩ or more	12A or less	7.0VA or less at AC100V 10.8VA or less at AC240V	No external power supply	No external contact input	None	High voltage input: about 1MΩ Temperature/low voltage input: Approximately 1MΩ or more Current input: approx. 50Ω	Operation is not affected by power outages of 20msec or less. However, any further power outage will return to the initial state.	Data retained by FRAM (approximately 10 years) *Number of rewrites: Approximately 10 billion times	Holds the minimum value of the measured value. Can be reset by key operation/external contact/communication Hold value backup is not possible when the instrument power is OFF.	Flashing display when input error or event occurs *Events 1 to 6 can be individually specified.	Holds the maximum value of the measured value.	0.0~100.0 seconds (digital filter OFF when set to 0.0)	0.25 seconds	DC 0~1V	0.500~1.500	-Input span~+Input span

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Analog multi tester (tester) thin CP8D

Sanwa Electric Meter Co., Ltd.

120+ people viewing

Response time: 51.98 hours

Voltmeters

5 models listed

Electronic work circuit battery voltage checker assembly kit using PIC16F819

ACT ELECTRONICS LIMITED.

$63.82

80+ people viewing

Voltmeters

Digital multimeter (tester) High accuracy/high resolution (PC connection) PC7000

Sanwa Electric Meter Co., Ltd.

170+ people viewing

Last viewed: 8 hours ago

Response time: 51.98 hours

Voltmeters

8 models listed

Electronic work circuit using PIC16F819 Battery voltage checker completed product

ACT ELECTRONICS LIMITED.

$76.82

130+ people viewing

Last viewed: 2 hours ago

Voltmeters

Digital multimeter (tester) Data processing (PC connection) PC20

Sanwa Electric Meter Co., Ltd.

180+ people viewing

Last viewed: 6 hours ago

Response time: 51.98 hours

Voltmeters

8 models listed

Clamp meter/Voltage detector Voltage/current logger

Yagyu Shokai Co., Ltd.

5.0

140+ people viewing

Last viewed: 2 hours ago

Response time: 3.17 hours

Voltmeters

6 models listed

Clamp meter/Voltage detector Voltage logger/Clamp logger (Data mini)

Yagyu Shokai Co., Ltd.

5.0

120+ people viewing

Last viewed: 3 hours ago

Response time: 3.17 hours

Voltmeters

5 models listed

Insulation resistance meter IR4052-50 (lead type without switch)

Soki Co., Ltd.

$239.32

5.0

340+ people viewing

Last viewed: 4 hours ago

Response time: 6.78 hours

Voltmeters

4 models listed

Industrial mV/V measuring instrument E1930 with multi-function display

Bika Japan Co., Ltd.

110+ people viewing

Response time: 11.51 hours

Voltmeters

3 models listed

Industrial mV/V measuring instrument with multifunction screen B6494

Bika Japan Co., Ltd.

110+ people viewing

Last viewed: 3 hours ago

Response time: 11.51 hours

Voltmeters

3 models listed

Bluetooth digital multimeter MU18B

Japan INSDAC Co., Ltd.

90+ people viewing

Last viewed: 3 hours ago

Response time: 111.21 hours

Voltmeters

4 models listed

High precision ammeter and voltmeter 2051/2052 series

Japan INSDAC Co., Ltd.

100+ people viewing

Last viewed: 3 hours ago

Response time: 111.21 hours

Voltmeters

5 models listed

See More Voltmeters Products

Other products of RKC INSTRUMENT

Reviews shown here are reviews of companies.

DIN rail mounting power regulator 15A type phase control SSNP-15F

RKC INSTRUMENT

140+ people viewing

Last viewed: 8 hours ago

Response time: 11.42 hours

Thyristors

4 models listed

Digital indicating controller (temperature controller) RZ series

RKC INSTRUMENT

600+ people viewing

Last viewed: 3 hours ago

Response time: 11.42 hours

Temperature Controllers

40 models listed

Digital indicating controller (temperature controller) RB series

RKC INSTRUMENT

480+ people viewing

Last viewed: 3 hours ago

Response time: 11.42 hours

Temperature Controllers

40 models listed

Digital indicating controller (temperature controller) SA100

RKC INSTRUMENT

540+ people viewing

Last viewed: 57 minutes ago

Response time: 11.42 hours

Temperature Controllers

40 models listed

Digital indicating controller (temperature controller) SA200

RKC INSTRUMENT

450+ people viewing

Last viewed: 8 hours ago

Response time: 11.42 hours

Temperature Controllers

40 models listed

Digital indicating controller (temperature controller) CB series

RKC INSTRUMENT

390+ people viewing

Last viewed: 1 minute ago

Response time: 11.42 hours

Temperature Controllers

40 models listed

Digital indicating controller (temperature controller) CB103 / CB403 / CB903

RKC INSTRUMENT

560+ people viewing

Last viewed: 8 hours ago

Response time: 11.42 hours

Temperature Controllers

40 models listed

Digital indicating controller (temperature controller) REX-C series

RKC INSTRUMENT

360+ people viewing

Last viewed: 1 hour ago

Response time: 11.42 hours

Temperature Controllers

40 models listed

Digital indicating controller (process/temperature controller) FZ series

RKC INSTRUMENT

460+ people viewing

Last viewed: 4 hours ago

Response time: 11.42 hours

Temperature Controllers

40 models listed

Digital indicating controller (process/temperature controller) FB series

RKC INSTRUMENT

350+ people viewing

Last viewed: 8 hours ago

Response time: 11.42 hours

Temperature Controllers

40 models listed

Modular controller (process/temperature controller) SR Mini HG SYSTEM

RKC INSTRUMENT

720+ people viewing

Last viewed: 4 hours ago

Response time: 11.42 hours

Temperature Controllers

30 models listed

Portable thermometer DP-350/DP-700

RKC INSTRUMENT

570+ people viewing

Last viewed: 5 hours ago

Response time: 11.42 hours

Data Loggers

18 models listed

View more products of RKC INSTRUMENT

About Company Handling This Product

RKC INSTRUMENT

Response Rate

100.0%

Response Time

11.4hrs

Company Overview

RKC Instrument has been continually growing for over half a century and strives to be a solution provider of m...

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Digital indicator AG500 RKC INSTRUMENT

RKC INSTRUMENT's Response Status

About This Product

■Large and clear display

■Slim depth 60mm

■Complete input/output functions (optional)

■Can be equipped with a power supply for sensors (optional)

■Equipped with various functions as standard (alarm function)

■Display function

10 Models of Digital indicator AG500

Customers who viewed this product also viewed

Other products of RKC INSTRUMENT

About Company Handling This Product

Related search keywords

Digital indicator AG500
RKC INSTRUMENT