All Categories

History

Modular controller (temperature controller for piping) SRJ-J-TI-A-K09-K09*N/N
Modular controller (temperature controller for piping) SRJ-RKC INSTRUMENT

Modular controller (temperature controller for piping) SRJ
RKC INSTRUMENT

RKC INSTRUMENT's Response Status

Response Rate

100.0%

Response Time

15.5hours

Relatively Fast Response


About This Product

■Main features

・Measurement accuracy: ±0.3% of displayed value ・Separate type saves wiring ・Maximum 16CH input in one unit (temperature input module) ・Up to 8CH output with one unit (SSR unit) ・Maximum number of temperature control points 64CH ・Supports front loader communication

■Saving wiring and reducing wiring man-hours Separate temperature controller ideal for pipe temperature control

・J-CVM SSR units are distributed and installed in temperature-controlled areas (piping sections) and wired with the minimum necessary heater lines. Connection with the J-TI temperature input module requires only one J-CVM communication cable, reducing wiring. - All inputs and outputs are connected by connectors, so wiring effort is kept to a minimum.

■Built-in Max.5A SSR

・The J-CVM SSR unit has 8 built-in SSRs with a maximum capacity of 5A. Can be used by connecting directly to a heater. -Equipped with 8 external SSR drive transistor outputs, allowing expansion of the number of output points.

■Small and space-saving installation

・J-TI-A temperature input module is compact, but can input up to 16 channels with one unit. ・J-TI-A can be multi-drop connected up to 4 units and can support temperature control of up to 64 channels. *Other product numbers are available.

  • Product

    Modular controller (temperature controller for piping) SRJ

Share this product


170+ people viewing

Last viewed: 22 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

9 Models of Modular controller (temperature controller for piping) SRJ

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power supply voltage Communication speed Inrush current Measurement input/range (CH9 to CH16) Measurement input/range (CH1 to CH8) Current consumption Maximum number of connections Connection method Safety standards Synchronization method Control type Output type/SCI Ambient humidity Ambient temperature Protocol Number of channels Sensor input connector Sampling period Interface Event type Event score Event addition function Other functions CE marking
Modular controller (temperature controller for piping) SRJ-Part Number-J-TI-A-K09-K09*N/N

J-TI-A-K09-K09*N/N

Available upon quote

DC20.4~26.4V [Including power supply voltage fluctuation] (Rated DC24V)

19,200bps or 38,400bps

20A or less

Thermocouple input group: K
0.0~400.0℃

Thermocouple input group: K
0.0~400.0℃

J-TI+J-CVM x 8 units: max. 5,160mA (DC24V)
J-TI alone: ​​Max. 160mA (DC24V)

4 units (J-TI)

RS-485 2-wire half-duplex multidrop connection

UL: UL61010-1c
cUL: CAN/CSA-C22.2 No.61010-1

Start-stop synchronous type

Brilliant II PID control with auto tuning (reverse action/direct action)

None (J-CVM output only)

5~95%RH Absolute humidity: MAX 29g/m3 dry air at 101.3 kPa

-10~+55℃

RKC communication or MODBUS-RTU
*The communication speed and protocol can be changed by host communication.

16 channels

None

0.25 seconds, 1 second (selectable)

Compliant with EIA standard RS-485

Upper/lower limit deviation, upper/lower limit deviation, within-range deviation, upper/lower limit input value

2 points

Standby operation, event timer, operation selection at input error

Control loop break alarm (LBA)

Low voltage directive: EN61010-1
EMC Directive: EN61000-3-2 EN61326-1
RoHS Directive: EN50581

Modular controller (temperature controller for piping) SRJ-Part Number-J-TI-A-K09-K09*N/C

J-TI-A-K09-K09*N/C

Available upon quote

DC20.4~26.4V [Including power supply voltage fluctuation] (Rated DC24V)

19,200bps or 38,400bps

20A or less

Thermocouple input group: K
0.0~400.0℃

Thermocouple input group: K
0.0~400.0℃

J-TI+J-CVM x 8 units: max. 5,160mA (DC24V)
J-TI alone: ​​Max. 160mA (DC24V)

4 units (J-TI)

RS-485 2-wire half-duplex multidrop connection

UL: UL61010-1c
cUL: CAN/CSA-C22.2 No.61010-1

Start-stop synchronous type

Brilliant II PID control with auto tuning (reverse action/direct action)

None (J-CVM output only)

5~95%RH Absolute humidity: MAX 29g/m3 dry air at 101.3 kPa

-10~+55℃

RKC communication or MODBUS-RTU
*The communication speed and protocol can be changed by host communication.

16 channels

With sensor input connector

0.25 seconds, 1 second (selectable)

Compliant with EIA standard RS-485

Upper/lower limit deviation, upper/lower limit deviation, within-range deviation, upper/lower limit input value

2 points

Standby operation, event timer, operation selection at input error

Control loop break alarm (LBA)

Low voltage directive: EN61010-1
EMC Directive: EN61000-3-2 EN61326-1
RoHS Directive: EN50581

Modular controller (temperature controller for piping) SRJ-Part Number-J-TI-A-K09-K10*N/N

J-TI-A-K09-K10*N/N

Available upon quote

DC20.4~26.4V [Including power supply voltage fluctuation] (Rated DC24V)

19,200bps or 38,400bps

20A or less

Thermocouple input group: K
0.0~800.0℃

Thermocouple input group: K
0.0~400.0℃

J-TI+J-CVM x 8 units: max. 5,160mA (DC24V)
J-TI alone: ​​Max. 160mA (DC24V)

4 units (J-TI)

RS-485 2-wire half-duplex multidrop connection

UL: UL61010-1c
cUL: CAN/CSA-C22.2 No.61010-1

Start-stop synchronous type

Brilliant II PID control with auto tuning (reverse action/direct action)

None (J-CVM output only)

5~95%RH Absolute humidity: MAX 29g/m3 dry air at 101.3 kPa

-10~+55℃

RKC communication or MODBUS-RTU
*The communication speed and protocol can be changed by host communication.

16 channels

None

0.25 seconds, 1 second (selectable)

Compliant with EIA standard RS-485

Upper/lower limit deviation, upper/lower limit deviation, within-range deviation, upper/lower limit input value

2 points

Standby operation, event timer, operation selection at input error

Control loop break alarm (LBA)

Low voltage directive: EN61010-1
EMC Directive: EN61000-3-2 EN61326-1
RoHS Directive: EN50581

Modular controller (temperature controller for piping) SRJ-Part Number-J-TI-A-K09-K10*N/C

J-TI-A-K09-K10*N/C

Available upon quote

DC20.4~26.4V [Including power supply voltage fluctuation] (Rated DC24V)

19,200bps or 38,400bps

20A or less

Thermocouple input group: K
0.0~800.0℃

Thermocouple input group: K
0.0~400.0℃

J-TI+J-CVM x 8 units: max. 5,160mA (DC24V)
J-TI alone: ​​Max. 160mA (DC24V)

4 units (J-TI)

RS-485 2-wire half-duplex multidrop connection

UL: UL61010-1c
cUL: CAN/CSA-C22.2 No.61010-1

Start-stop synchronous type

Brilliant II PID control with auto tuning (reverse action/direct action)

None (J-CVM output only)

5~95%RH Absolute humidity: MAX 29g/m3 dry air at 101.3 kPa

-10~+55℃

RKC communication or MODBUS-RTU
*The communication speed and protocol can be changed by host communication.

16 channels

With sensor input connector

0.25 seconds, 1 second (selectable)

Compliant with EIA standard RS-485

Upper/lower limit deviation, upper/lower limit deviation, within-range deviation, upper/lower limit input value

2 points

Standby operation, event timer, operation selection at input error

Control loop break alarm (LBA)

Low voltage directive: EN61010-1
EMC Directive: EN61000-3-2 EN61326-1
RoHS Directive: EN50581

Modular controller (temperature controller for piping) SRJ-Part Number-J-TI-A-K09-K11*N/N

J-TI-A-K09-K11*N/N

Available upon quote

DC20.4~26.4V [Including power supply voltage fluctuation] (Rated DC24V)

19,200bps or 38,400bps

20A or less

Thermocouple input group: K
0.0~1,300.0℃

Thermocouple input group: K
0.0~400.0℃

J-TI+J-CVM x 8 units: max. 5,160mA (DC24V)
J-TI alone: ​​Max. 160mA (DC24V)

4 units (J-TI)

RS-485 2-wire half-duplex multidrop connection

UL: UL61010-1c
cUL: CAN/CSA-C22.2 No.61010-1

Start-stop synchronous type

Brilliant II PID control with auto tuning (reverse action/direct action)

None (J-CVM output only)

5~95%RH Absolute humidity: MAX 29g/m3 dry air at 101.3 kPa

-10~+55℃

RKC communication or MODBUS-RTU
*The communication speed and protocol can be changed by host communication.

16 channels

None

0.25 seconds, 1 second (selectable)

Compliant with EIA standard RS-485

Upper/lower limit deviation, upper/lower limit deviation, within-range deviation, upper/lower limit input value

2 points

Standby operation, event timer, operation selection at input error

Control loop break alarm (LBA)

Low voltage directive: EN61010-1
EMC Directive: EN61000-3-2 EN61326-1
RoHS Directive: EN50581

Modular controller (temperature controller for piping) SRJ-Part Number-J-TI-A-K09-K11*N/C

J-TI-A-K09-K11*N/C

Available upon quote

DC20.4~26.4V [Including power supply voltage fluctuation] (Rated DC24V)

19,200bps or 38,400bps

20A or less

Thermocouple input group: K
0.0~1,300.0℃

Thermocouple input group: K
0.0~400.0℃

J-TI+J-CVM x 8 units: max. 5,160mA (DC24V)
J-TI alone: ​​Max. 160mA (DC24V)

4 units (J-TI)

RS-485 2-wire half-duplex multidrop connection

UL: UL61010-1c
cUL: CAN/CSA-C22.2 No.61010-1

Start-stop synchronous type

Brilliant II PID control with auto tuning (reverse action/direct action)

None (J-CVM output only)

5~95%RH Absolute humidity: MAX 29g/m3 dry air at 101.3 kPa

-10~+55℃

RKC communication or MODBUS-RTU
*The communication speed and protocol can be changed by host communication.

16 channels

With sensor input connector

0.25 seconds, 1 second (selectable)

Compliant with EIA standard RS-485

Upper/lower limit deviation, upper/lower limit deviation, within-range deviation, upper/lower limit input value

2 points

Standby operation, event timer, operation selection at input error

Control loop break alarm (LBA)

Low voltage directive: EN61010-1
EMC Directive: EN61000-3-2 EN61326-1
RoHS Directive: EN50581

Modular controller (temperature controller for piping) SRJ-Part Number-J-TI-A-K09-R10*N/N

J-TI-A-K09-R10*N/N

Available upon quote

DC20.4~26.4V [Including power supply voltage fluctuation] (Rated DC24V)

19,200bps or 38,400bps

20A or less

Thermocouple input group: R
0.0~1,700.0℃

Thermocouple input group: K
0.0~400.0℃

J-TI+J-CVM x 8 units: max. 5,160mA (DC24V)
J-TI alone: ​​Max. 160mA (DC24V)

4 units (J-TI)

RS-485 2-wire half-duplex multidrop connection

UL: UL61010-1c
cUL: CAN/CSA-C22.2 No.61010-1

Start-stop synchronous type

Brilliant II PID control with auto tuning (reverse action/direct action)

None (J-CVM output only)

5~95%RH Absolute humidity: MAX 29g/m3 dry air at 101.3 kPa

-10~+55℃

RKC communication or MODBUS-RTU
*The communication speed and protocol can be changed by host communication.

16 channels

None

0.25 seconds, 1 second (selectable)

Compliant with EIA standard RS-485

Upper/lower limit deviation, upper/lower limit deviation, within-range deviation, upper/lower limit input value

2 points

Standby operation, event timer, operation selection at input error

Control loop break alarm (LBA)

Low voltage directive: EN61010-1
EMC Directive: EN61000-3-2 EN61326-1
RoHS Directive: EN50581

Modular controller (temperature controller for piping) SRJ-Part Number-J-TI-A-K09-R10*N/C

J-TI-A-K09-R10*N/C

Available upon quote

DC20.4~26.4V [Including power supply voltage fluctuation] (Rated DC24V)

19,200bps or 38,400bps

20A or less

Thermocouple input group: R
0.0~1,700.0℃

Thermocouple input group: K
0.0~400.0℃

J-TI+J-CVM x 8 units: max. 5,160mA (DC24V)
J-TI alone: ​​Max. 160mA (DC24V)

4 units (J-TI)

RS-485 2-wire half-duplex multidrop connection

UL: UL61010-1c
cUL: CAN/CSA-C22.2 No.61010-1

Start-stop synchronous type

Brilliant II PID control with auto tuning (reverse action/direct action)

None (J-CVM output only)

5~95%RH Absolute humidity: MAX 29g/m3 dry air at 101.3 kPa

-10~+55℃

RKC communication or MODBUS-RTU
*The communication speed and protocol can be changed by host communication.

16 channels

With sensor input connector

0.25 seconds, 1 second (selectable)

Compliant with EIA standard RS-485

Upper/lower limit deviation, upper/lower limit deviation, within-range deviation, upper/lower limit input value

2 points

Standby operation, event timer, operation selection at input error

Control loop break alarm (LBA)

Low voltage directive: EN61010-1
EMC Directive: EN61000-3-2 EN61326-1
RoHS Directive: EN50581

Modular controller (temperature controller for piping) SRJ-Part Number-J-TI-A-K09-D40*N/N

J-TI-A-K09-D40*N/N

Available upon quote

DC20.4~26.4V [Including power supply voltage fluctuation] (Rated DC24V)

19,200bps or 38,400bps

20A or less

RTD input group: Pt100
0.0~400.0℃

Thermocouple input group: K
0.0~400.0℃

J-TI+J-CVM x 8 units: max. 5,160mA (DC24V)
J-TI alone: ​​Max. 160mA (DC24V)

4 units (J-TI)

RS-485 2-wire half-duplex multidrop connection

UL: UL61010-1c
cUL: CAN/CSA-C22.2 No.61010-1

Start-stop synchronous type

Brilliant II PID control with auto tuning (reverse action/direct action)

None (J-CVM output only)

5~95%RH Absolute humidity: MAX 29g/m3 dry air at 101.3 kPa

-10~+55℃

RKC communication or MODBUS-RTU
*The communication speed and protocol can be changed by host communication.

16 channels

None

0.25 seconds, 1 second (selectable)

Compliant with EIA standard RS-485

Upper/lower limit deviation, upper/lower limit deviation, within-range deviation, upper/lower limit input value

2 points

Standby operation, event timer, operation selection at input error

Control loop break alarm (LBA)

Low voltage directive: EN61010-1
EMC Directive: EN61000-3-2 EN61326-1
RoHS Directive: EN50581

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Temperature Controllers Products

Other products of RKC INSTRUMENT

Reviews shown here are reviews of companies.


View more products of RKC INSTRUMENT

About Company Handling This Product

Response Rate

100.0%


Response Time

15.5hrs

Company Overview

RKC Instrument has been continually growing for over half a century and strives to be a solution provider of m...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree