Digital indicating controller (process/temperature controller) FB series-FB100-MN-3*N/NN

Digital indicating controller (process/temperature controller) FB series
RKC INSTRUMENT

RKC INSTRUMENT's Response Status

Response Rate

100.0%

Response Time

12.6hours

Relatively Fast Response

About This Product

■Abundant input/outputVarious combinations of various input/output options are possible.

■Cooperative operation using communication・Various cooperative operations can be performed using communication between controllers.
・Group automatic heating function with learning function
・Temperature ratio setting
・Cascade control
・Group RUN/STOP function

■Two types of PID control can be selected: "emphasis on responsiveness" and "emphasis on followability"You can choose between measured value differential type PID control (emphasis on responsiveness), which is most suitable for fixed value control, and deviation differential type PID control (emphasis on followability), which is most suitable for lamp control.

■New type of heating/cooling PID control that strengthens undershoot suppression on the cooling side- Equipped with undershoot suppression function (USS) for cooling control. *USS：UnderShoot Suppression
- Dedicated control algorithm for water cooling or air cooling control can be selected.

■Equipped with loader communication- All models are equipped with a loader communication port.
・Protem2, a controller and indicator setting data management support tool, is available.

*Other product numbers are available.

Model
There are 10 models for this product.

Product
Digital indicating controller (process/temperature controller) FB series

Handling Company
RKC INSTRUMENT

Categories

Temperature Control

Temperature Controllers

Meters & Instruments

Controllers

Temperature Control

Temperature Regulators

Temperature Control

Digital Thermostats

280+ people viewing

Last viewed: 1 hour ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Digital indicating controller (process/temperature controller) FB series

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Power supply voltage	Square root calculation function	Applicable standards	Mass	Permissible ambient humidity	Permissible ambient temperature	Influence of permissible input conductors	Withstand voltage	Insulation resistance	Inrush current	Power consumption	Error during close instrumentation	Specifying factory settings	Output type	Output 2 (OUT2)	Output 1 (OUT1)	Effects of power outage	Effect of signal source resistance	Usage atmosphere/conditions	Link destination area number setting	Multi-memory area function Number of areas	Digital filter	Soak time setting	Sampling period	Size	Case color	Optional features	Operation when input wire is disconnected	PV ratio	PV bias
FB100-MN-3*N/NN	Available upon quote	AC/DC24V	Arithmetic formula: PV=√ (input value x PV ratio + PV bias) Low level cutoff: 0.00~25.00% of span	CE marking compliant, UL, cUL certified product, RCM marking compliant	Approximately 150g	5~95% (no condensation) *Absolute humidity: MAX.W.C 29.3g/m3 dry air at 101.3kPa	-10~+50℃	0.01%/Ω or less (RTD input) *However, maximum 10Ω per wire	Between measurement terminal and ground: AC 1,500V for 1 minute Between power terminal and ground: AC 1,500V for 1 minute Between measurement terminal and power supply: AC 2,300V for 1 minute	Between measurement terminal and ground: DC 500V 20MΩ or more Between power terminal and ground: DC 500V 20MΩ or more Between measurement terminal and power supply: DC 500V 20MΩ or more	Maximum 12A or less	AC24V specifications: max. 5.3VA DC24V specification: max. 142mA	±1.5℃	None	1a contact Rating: AC250V 3A DC30V 1A (resistive load) Electrical life: 100,000 times or more (rated load)	No output 2	Relay contact output	No effect on power outages of 20ms or less For more than that, hot start or cold start can be selected.	0.2μV/Ω (thermocouple input)	No corrosive or flammable gases, and no heavy dust. No external noise and no direct vibration or impact. A place that is not exposed to direct sunlight.	1~8 (No link if set to 0)	8 points	Can be set from 0.1 to 100.0 seconds (OFF at 0 seconds)	・Second unit setting: 0 minutes 00 seconds ~199 minutes 59 seconds ・Minute setting: 0 hours 0 minutes ~99 hours 59 minutes *Selectable	0.1 seconds (switchable to 0.05 seconds/0.25 seconds)	48×48mm	White tone	No optional features	Upscale/Downscale *Switchable	0.500~1.500	±input range span
FB100-MN-3*N/AN	Available upon quote	AC/DC24V	Arithmetic formula: PV=√ (input value x PV ratio + PV bias) Low level cutoff: 0.00~25.00% of span	CE marking compliant, UL, cUL certified product, RCM marking compliant	Approximately 150g	5~95% (no condensation) *Absolute humidity: MAX.W.C 29.3g/m3 dry air at 101.3kPa	-10~+50℃	0.01%/Ω or less (RTD input) *However, maximum 10Ω per wire	Between measurement terminal and ground: AC 1,500V for 1 minute Between power terminal and ground: AC 1,500V for 1 minute Between measurement terminal and power supply: AC 2,300V for 1 minute	Between measurement terminal and ground: DC 500V 20MΩ or more Between power terminal and ground: DC 500V 20MΩ or more Between measurement terminal and power supply: DC 500V 20MΩ or more	Maximum 12A or less	AC24V specifications: max. 5.3VA DC24V specification: max. 142mA	±1.5℃	None	1a contact Rating: AC250V 3A DC30V 1A (resistive load) Electrical life: 100,000 times or more (rated load)	No output 2	Relay contact output	No effect on power outages of 20ms or less For more than that, hot start or cold start can be selected.	0.2μV/Ω (thermocouple input)	No corrosive or flammable gases, and no heavy dust. No external noise and no direct vibration or impact. A place that is not exposed to direct sunlight.	1~8 (No link if set to 0)	8 points	Can be set from 0.1 to 100.0 seconds (OFF at 0 seconds)	・Second unit setting: 0 minutes 00 seconds ~199 minutes 59 seconds ・Minute setting: 0 hours 0 minutes ~99 hours 59 minutes *Selectable	0.1 seconds (switchable to 0.05 seconds/0.25 seconds)	48×48mm	Black tone	No optional features	Upscale/Downscale *Switchable	0.500~1.500	±input range span
FB100-MN-3*A/NN	Available upon quote	AC/DC24V	Arithmetic formula: PV=√ (input value x PV ratio + PV bias) Low level cutoff: 0.00~25.00% of span	CE marking compliant, UL, cUL certified product, RCM marking compliant	Approximately 150g	5~95% (no condensation) *Absolute humidity: MAX.W.C 29.3g/m3 dry air at 101.3kPa	-10~+50℃	0.01%/Ω or less (RTD input) *However, maximum 10Ω per wire	Between measurement terminal and ground: AC 1,500V for 1 minute Between power terminal and ground: AC 1,500V for 1 minute Between measurement terminal and power supply: AC 2,300V for 1 minute	Between measurement terminal and ground: DC 500V 20MΩ or more Between power terminal and ground: DC 500V 20MΩ or more Between measurement terminal and power supply: DC 500V 20MΩ or more	Maximum 12A or less	AC24V specifications: max. 5.3VA DC24V specification: max. 142mA	±1.5℃	None	1a contact Rating: AC250V 3A DC30V 1A (resistive load) Electrical life: 100,000 times or more (rated load)	No output 2	Relay contact output	No effect on power outages of 20ms or less For more than that, hot start or cold start can be selected.	0.2μV/Ω (thermocouple input)	No corrosive or flammable gases, and no heavy dust. No external noise and no direct vibration or impact. A place that is not exposed to direct sunlight.	1~8 (No link if set to 0)	8 points	Can be set from 0.1 to 100.0 seconds (OFF at 0 seconds)	・Second unit setting: 0 minutes 00 seconds ~199 minutes 59 seconds ・Minute setting: 0 hours 0 minutes ~99 hours 59 minutes *Selectable	0.1 seconds (switchable to 0.05 seconds/0.25 seconds)	48×48mm	White tone	5 digital inputs	Upscale/Downscale *Switchable	0.500~1.500	±input range span
FB100-MN-3*A/AN	Available upon quote	AC/DC24V	Arithmetic formula: PV=√ (input value x PV ratio + PV bias) Low level cutoff: 0.00~25.00% of span	CE marking compliant, UL, cUL certified product, RCM marking compliant	Approximately 150g	5~95% (no condensation) *Absolute humidity: MAX.W.C 29.3g/m3 dry air at 101.3kPa	-10~+50℃	0.01%/Ω or less (RTD input) *However, maximum 10Ω per wire	Between measurement terminal and ground: AC 1,500V for 1 minute Between power terminal and ground: AC 1,500V for 1 minute Between measurement terminal and power supply: AC 2,300V for 1 minute	Between measurement terminal and ground: DC 500V 20MΩ or more Between power terminal and ground: DC 500V 20MΩ or more Between measurement terminal and power supply: DC 500V 20MΩ or more	Maximum 12A or less	AC24V specifications: max. 5.3VA DC24V specification: max. 142mA	±1.5℃	None	1a contact Rating: AC250V 3A DC30V 1A (resistive load) Electrical life: 100,000 times or more (rated load)	No output 2	Relay contact output	No effect on power outages of 20ms or less For more than that, hot start or cold start can be selected.	0.2μV/Ω (thermocouple input)	No corrosive or flammable gases, and no heavy dust. No external noise and no direct vibration or impact. A place that is not exposed to direct sunlight.	1~8 (No link if set to 0)	8 points	Can be set from 0.1 to 100.0 seconds (OFF at 0 seconds)	・Second unit setting: 0 minutes 00 seconds ~199 minutes 59 seconds ・Minute setting: 0 hours 0 minutes ~99 hours 59 minutes *Selectable	0.1 seconds (switchable to 0.05 seconds/0.25 seconds)	48×48mm	Black tone	5 digital inputs	Upscale/Downscale *Switchable	0.500~1.500	±input range span
FB100-MN-3*B/NN	Available upon quote	AC/DC24V	Arithmetic formula: PV=√ (input value x PV ratio + PV bias) Low level cutoff: 0.00~25.00% of span	CE marking compliant, UL, cUL certified product, RCM marking compliant	Approximately 150g	5~95% (no condensation) *Absolute humidity: MAX.W.C 29.3g/m3 dry air at 101.3kPa	-10~+50℃	0.01%/Ω or less (RTD input) *However, maximum 10Ω per wire	Between measurement terminal and ground: AC 1,500V for 1 minute Between power terminal and ground: AC 1,500V for 1 minute Between measurement terminal and power supply: AC 2,300V for 1 minute	Between measurement terminal and ground: DC 500V 20MΩ or more Between power terminal and ground: DC 500V 20MΩ or more Between measurement terminal and power supply: DC 500V 20MΩ or more	Maximum 12A or less	AC24V specifications: max. 5.3VA DC24V specification: max. 142mA	±1.5℃	None	1a contact Rating: AC250V 3A DC30V 1A (resistive load) Electrical life: 100,000 times or more (rated load)	No output 2	Relay contact output	No effect on power outages of 20ms or less For more than that, hot start or cold start can be selected.	0.2μV/Ω (thermocouple input)	No corrosive or flammable gases, and no heavy dust. No external noise and no direct vibration or impact. A place that is not exposed to direct sunlight.	1~8 (No link if set to 0)	8 points	Can be set from 0.1 to 100.0 seconds (OFF at 0 seconds)	・Second unit setting: 0 minutes 00 seconds ~199 minutes 59 seconds ・Minute setting: 0 hours 0 minutes ~99 hours 59 minutes *Selectable	0.1 seconds (switchable to 0.05 seconds/0.25 seconds)	48×48mm	White tone	2 digital inputs + remote setting input	Upscale/Downscale *Switchable	0.500~1.500	±input range span
FB100-MN-3*B/AN	Available upon quote	AC/DC24V	Arithmetic formula: PV=√ (input value x PV ratio + PV bias) Low level cutoff: 0.00~25.00% of span	CE marking compliant, UL, cUL certified product, RCM marking compliant	Approximately 150g	5~95% (no condensation) *Absolute humidity: MAX.W.C 29.3g/m3 dry air at 101.3kPa	-10~+50℃	0.01%/Ω or less (RTD input) *However, maximum 10Ω per wire	Between measurement terminal and ground: AC 1,500V for 1 minute Between power terminal and ground: AC 1,500V for 1 minute Between measurement terminal and power supply: AC 2,300V for 1 minute	Between measurement terminal and ground: DC 500V 20MΩ or more Between power terminal and ground: DC 500V 20MΩ or more Between measurement terminal and power supply: DC 500V 20MΩ or more	Maximum 12A or less	AC24V specifications: max. 5.3VA DC24V specification: max. 142mA	±1.5℃	None	1a contact Rating: AC250V 3A DC30V 1A (resistive load) Electrical life: 100,000 times or more (rated load)	No output 2	Relay contact output	No effect on power outages of 20ms or less For more than that, hot start or cold start can be selected.	0.2μV/Ω (thermocouple input)	No corrosive or flammable gases, and no heavy dust. No external noise and no direct vibration or impact. A place that is not exposed to direct sunlight.	1~8 (No link if set to 0)	8 points	Can be set from 0.1 to 100.0 seconds (OFF at 0 seconds)	・Second unit setting: 0 minutes 00 seconds ~199 minutes 59 seconds ・Minute setting: 0 hours 0 minutes ~99 hours 59 minutes *Selectable	0.1 seconds (switchable to 0.05 seconds/0.25 seconds)	48×48mm	Black tone	2 digital inputs + remote setting input	Upscale/Downscale *Switchable	0.500~1.500	±input range span
FB100-MN-3*C/NN	Available upon quote	AC/DC24V	Arithmetic formula: PV=√ (input value x PV ratio + PV bias) Low level cutoff: 0.00~25.00% of span	CE marking compliant, UL, cUL certified product, RCM marking compliant	Approximately 150g	5~95% (no condensation) *Absolute humidity: MAX.W.C 29.3g/m3 dry air at 101.3kPa	-10~+50℃	0.01%/Ω or less (RTD input) *However, maximum 10Ω per wire	Between measurement terminal and ground: AC 1,500V for 1 minute Between power terminal and ground: AC 1,500V for 1 minute Between measurement terminal and power supply: AC 2,300V for 1 minute	Between measurement terminal and ground: DC 500V 20MΩ or more Between power terminal and ground: DC 500V 20MΩ or more Between measurement terminal and power supply: DC 500V 20MΩ or more	Maximum 12A or less	AC24V specifications: max. 5.3VA DC24V specification: max. 142mA	±1.5℃	None	1a contact Rating: AC250V 3A DC30V 1A (resistive load) Electrical life: 100,000 times or more (rated load)	No output 2	Relay contact output	No effect on power outages of 20ms or less For more than that, hot start or cold start can be selected.	0.2μV/Ω (thermocouple input)	No corrosive or flammable gases, and no heavy dust. No external noise and no direct vibration or impact. A place that is not exposed to direct sunlight.	1~8 (No link if set to 0)	8 points	Can be set from 0.1 to 100.0 seconds (OFF at 0 seconds)	・Second unit setting: 0 minutes 00 seconds ~199 minutes 59 seconds ・Minute setting: 0 hours 0 minutes ~99 hours 59 minutes *Selectable	0.1 seconds (switchable to 0.05 seconds/0.25 seconds)	48×48mm	White tone	2 digital inputs + opening feedback resistance input	Upscale/Downscale *Switchable	0.500~1.500	±input range span
FB100-MN-3*C/AN	Available upon quote	AC/DC24V	Arithmetic formula: PV=√ (input value x PV ratio + PV bias) Low level cutoff: 0.00~25.00% of span	CE marking compliant, UL, cUL certified product, RCM marking compliant	Approximately 150g	5~95% (no condensation) *Absolute humidity: MAX.W.C 29.3g/m3 dry air at 101.3kPa	-10~+50℃	0.01%/Ω or less (RTD input) *However, maximum 10Ω per wire	Between measurement terminal and ground: AC 1,500V for 1 minute Between power terminal and ground: AC 1,500V for 1 minute Between measurement terminal and power supply: AC 2,300V for 1 minute	Between measurement terminal and ground: DC 500V 20MΩ or more Between power terminal and ground: DC 500V 20MΩ or more Between measurement terminal and power supply: DC 500V 20MΩ or more	Maximum 12A or less	AC24V specifications: max. 5.3VA DC24V specification: max. 142mA	±1.5℃	None	1a contact Rating: AC250V 3A DC30V 1A (resistive load) Electrical life: 100,000 times or more (rated load)	No output 2	Relay contact output	No effect on power outages of 20ms or less For more than that, hot start or cold start can be selected.	0.2μV/Ω (thermocouple input)	No corrosive or flammable gases, and no heavy dust. No external noise and no direct vibration or impact. A place that is not exposed to direct sunlight.	1~8 (No link if set to 0)	8 points	Can be set from 0.1 to 100.0 seconds (OFF at 0 seconds)	・Second unit setting: 0 minutes 00 seconds ~199 minutes 59 seconds ・Minute setting: 0 hours 0 minutes ~99 hours 59 minutes *Selectable	0.1 seconds (switchable to 0.05 seconds/0.25 seconds)	48×48mm	Black tone	2 digital inputs + opening feedback resistance input	Upscale/Downscale *Switchable	0.500~1.500	±input range span
FB100-MN-3*D/NN	Available upon quote	AC/DC24V	Arithmetic formula: PV=√ (input value x PV ratio + PV bias) Low level cutoff: 0.00~25.00% of span	CE marking compliant, UL, cUL certified product, RCM marking compliant	Approximately 150g	5~95% (no condensation) *Absolute humidity: MAX.W.C 29.3g/m3 dry air at 101.3kPa	-10~+50℃	0.01%/Ω or less (RTD input) *However, maximum 10Ω per wire	Between measurement terminal and ground: AC 1,500V for 1 minute Between power terminal and ground: AC 1,500V for 1 minute Between measurement terminal and power supply: AC 2,300V for 1 minute	Between measurement terminal and ground: DC 500V 20MΩ or more Between power terminal and ground: DC 500V 20MΩ or more Between measurement terminal and power supply: DC 500V 20MΩ or more	Maximum 12A or less	AC24V specifications: max. 5.3VA DC24V specification: max. 142mA	±1.5℃	None	1a contact Rating: AC250V 3A DC30V 1A (resistive load) Electrical life: 100,000 times or more (rated load)	No output 2	Relay contact output	No effect on power outages of 20ms or less For more than that, hot start or cold start can be selected.	0.2μV/Ω (thermocouple input)	No corrosive or flammable gases, and no heavy dust. No external noise and no direct vibration or impact. A place that is not exposed to direct sunlight.	1~8 (No link if set to 0)	8 points	Can be set from 0.1 to 100.0 seconds (OFF at 0 seconds)	・Second unit setting: 0 minutes 00 seconds ~199 minutes 59 seconds ・Minute setting: 0 hours 0 minutes ~99 hours 59 minutes *Selectable	0.1 seconds (switchable to 0.05 seconds/0.25 seconds)	48×48mm	White tone	2 digital inputs + 2 CT inputs (CT is sold separately)	Upscale/Downscale *Switchable	0.500~1.500	±input range span
FB100-MN-3*D/AN	Available upon quote	AC/DC24V	Arithmetic formula: PV=√ (input value x PV ratio + PV bias) Low level cutoff: 0.00~25.00% of span	CE marking compliant, UL, cUL certified product, RCM marking compliant	Approximately 150g	5~95% (no condensation) *Absolute humidity: MAX.W.C 29.3g/m3 dry air at 101.3kPa	-10~+50℃	0.01%/Ω or less (RTD input) *However, maximum 10Ω per wire	Between measurement terminal and ground: AC 1,500V for 1 minute Between power terminal and ground: AC 1,500V for 1 minute Between measurement terminal and power supply: AC 2,300V for 1 minute	Between measurement terminal and ground: DC 500V 20MΩ or more Between power terminal and ground: DC 500V 20MΩ or more Between measurement terminal and power supply: DC 500V 20MΩ or more	Maximum 12A or less	AC24V specifications: max. 5.3VA DC24V specification: max. 142mA	±1.5℃	None	1a contact Rating: AC250V 3A DC30V 1A (resistive load) Electrical life: 100,000 times or more (rated load)	No output 2	Relay contact output	No effect on power outages of 20ms or less For more than that, hot start or cold start can be selected.	0.2μV/Ω (thermocouple input)	No corrosive or flammable gases, and no heavy dust. No external noise and no direct vibration or impact. A place that is not exposed to direct sunlight.	1~8 (No link if set to 0)	8 points	Can be set from 0.1 to 100.0 seconds (OFF at 0 seconds)	・Second unit setting: 0 minutes 00 seconds ~199 minutes 59 seconds ・Minute setting: 0 hours 0 minutes ~99 hours 59 minutes *Selectable	0.1 seconds (switchable to 0.05 seconds/0.25 seconds)	48×48mm	Black tone	2 digital inputs + 2 CT inputs (CT is sold separately)	Upscale/Downscale *Switchable	0.500~1.500	±input range span

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Silicone rubber heater standard type

O&M HEATER CO.,LTD.

120+ people viewing

Last viewed: 4 hours ago

Response time: 26.58 hours

Temperature Controllers

4 models listed

TABLETOP FREEZERv Small tabletop freezer GEL5 [for one batch 1 liter production]

UNO Co., Ltd.

100+ people viewing

Last viewed: 3 hours ago

Response time: 9.93 hours

Temperature Controllers

3 models listed

The earth-friendly R448A cooling system opens up the future of cooling.

Kulow System Co., Ltd.

130+ people viewing

Response time: 11.56 hours

Temperature Controllers

3 models listed

Silicone rubber heater E type (etching)

O&M HEATER CO.,LTD.

110+ people viewing

Last viewed: 5 hours ago

Response time: 26.58 hours

Temperature Controllers

4 models listed

TABLETOP FREEZERv Small tabletop freezer POKER [for one batch 2 liter production]

UNO Co., Ltd.

90+ people viewing

Last viewed: 2 hours ago

Response time: 9.93 hours

Temperature Controllers

3 models listed

Earth-friendly and efficient cooling screw refrigerator RSU-R502TFV

Kulow System Co., Ltd.

140+ people viewing

Response time: 11.56 hours

Temperature Controllers

3 models listed

Fresh warm storage/prefabricated refrigerator

Asahi Mentex Co., Ltd.

140+ people viewing

Response time: 26.62 hours

Temperature Controllers

3 models listed

RTBA type/RTBA-V type CFC-free high efficiency centrifugal chiller uses low pressure/low GWP refrigerant R1224yd (Z)

Ebara Refrigeration Systems Co., Ltd.

200+ people viewing

Response time: 13.33 hours

Temperature Controllers

3 models listed

MAXPOWER Peltier temperature control head for device temperature testing

Sensor Controls Co., Ltd.

210+ people viewing

Response time: 15.93 hours

Temperature Controllers

8 models listed

Digital indicating controller (temperature controller) RZ series

RKC INSTRUMENT

540+ people viewing

Last viewed: 3 hours ago

Response time: 12.55 hours

Temperature Controllers

40 models listed

Digital instruction adjustment ACS-13A

Shinko Technos Co., Ltd.

790+ people viewing

Last viewed: 7 hours ago

Response time: 52.99 hours

Temperature Controllers

12 models listed

Silicone rubber heater H type (high temperature)

O&M HEATER CO.,LTD.

90+ people viewing

Response time: 26.58 hours

Temperature Controllers

4 models listed

See More Temperature Controllers Products

Other products of RKC INSTRUMENT

Reviews shown here are reviews of companies.

DIN rail mounting power regulator 15A type phase control SSNP-15F

RKC INSTRUMENT

100+ people viewing

Last viewed: 4 hours ago

Response time: 12.55 hours

Thyristors

3 models listed

Digital indicating controller (temperature controller) RZ series

RKC INSTRUMENT

540+ people viewing

Last viewed: 3 hours ago

Response time: 12.55 hours

Temperature Controllers

40 models listed

Digital indicating controller (temperature controller) RB series

RKC INSTRUMENT

410+ people viewing

Last viewed: 15 hours ago

Response time: 12.55 hours

Temperature Controllers

40 models listed

Digital indicating controller (temperature controller) SA100

RKC INSTRUMENT

450+ people viewing

Last viewed: 5 hours ago

Response time: 12.55 hours

Temperature Controllers

40 models listed

Digital indicating controller (temperature controller) SA200

RKC INSTRUMENT

390+ people viewing

Last viewed: 15 hours ago

Response time: 12.55 hours

Temperature Controllers

40 models listed

Digital indicating controller (temperature controller) CB series

RKC INSTRUMENT

330+ people viewing

Last viewed: 15 hours ago

Response time: 12.55 hours

Temperature Controllers

40 models listed

Digital indicating controller (temperature controller) CB103 / CB403 / CB903

RKC INSTRUMENT

450+ people viewing

Last viewed: 5 minutes ago

Response time: 12.55 hours

Temperature Controllers

40 models listed

Digital indicating controller (temperature controller) REX-C series

RKC INSTRUMENT

310+ people viewing

Last viewed: 15 hours ago

Response time: 12.55 hours

Temperature Controllers

40 models listed

Digital indicating controller (process/temperature controller) FZ series

RKC INSTRUMENT

390+ people viewing

Last viewed: 15 hours ago

Response time: 12.55 hours

Temperature Controllers

40 models listed

Modular controller (process/temperature controller) SR Mini HG SYSTEM (H-PCP)

RKC INSTRUMENT

210+ people viewing

Last viewed: 16 hours ago

Response time: 12.55 hours

Temperature Controllers

12 models listed

Portable thermometer DP-350/DP-700

RKC INSTRUMENT

520+ people viewing

Last viewed: 6 hours ago

Response time: 12.55 hours

Data Loggers

18 models listed

Temperature and humidity sensor RHT series

RKC INSTRUMENT

570+ people viewing

Last viewed: 7 hours ago

Response time: 12.55 hours

Humidity and Temperature Sensors

24 models listed

View more products of RKC INSTRUMENT

About Company Handling This Product

RKC INSTRUMENT

Response Rate

100.0%

Response Time

12.6hrs

Company Overview

RKC Instrument has been continually growing for over half a century and strives to be a solution provider of m...

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Digital indicating controller (process/temperature controller) FB series RKC INSTRUMENT

RKC INSTRUMENT's Response Status

About This Product

■Abundant input/output

■Cooperative operation using communication

■Two types of PID control can be selected: "emphasis on responsiveness" and "emphasis on followability"

■New type of heating/cooling PID control that strengthens undershoot suppression on the cooling side

■Equipped with loader communication

10 Models of Digital indicating controller (process/temperature controller) FB series

Customers who viewed this product also viewed

Other products of RKC INSTRUMENT

About Company Handling This Product

Related search keywords

Digital indicating controller (process/temperature controller) FB series
RKC INSTRUMENT