All Categories

History

Digital indicating controller (temperature controller) SA200-SA200FK01-MN-3*NN-NN/N
Digital indicating controller (temperature controller) SA200-RKC INSTRUMENT

Digital indicating controller (temperature controller) SA200
RKC INSTRUMENT

RKC INSTRUMENT's Response Status

Response Rate

100.0%

Response Time

14.3hours

Relatively Fast Response


About This Product

■SA200

・A wealth of functions in a small body - Close-contact instrumentation is possible. A true space-saving temperature controller ・Simultaneous display of measured temperature and set value

■48 (horizontal) x 24 (vertical) mm size compact temperature controller

・A small controller that can be installed even on narrow installation surfaces. -Equipped with a large PV display that is small but highly visible.

■Equipped with control status discrimination type self-tuning function

- Automatically tunes PID constants when it is determined that control is disrupted. -Auto tuning function is also available.

■Communication function (RS-485) can be installed (optional)

- Communication function (RS-485) allows multi-drop connection of up to 31 units. - RKC standard and MODBUS protocol can be selected.

■Transmission output can be added (optional)

One transmission output point can be added for convenient connection with external equipment. *Output is possible by assigning transmission output to output 1 (OUT1).

■Two types available: black base tone and white base tone.

Two types are available, one with a black tone and one with a white tone, to match the device.

■e-CON connector connection type SA220 available

・This is a controller that is wired with an e-CON connector. ・Wiring man-hours can be reduced compared to terminal block wiring. *Some functions are limited compared to SA200

■Applicable standards

・UL: UL61010-1 ・C-UL:CAN/CSA-C22.2 NO.61010-1 ・CE marking a) Low voltage directive: EN61010-1, b) EMC directive: EN61326-1, C) RoHS directive: EN IEC 63000 ・RCM: EN55011 ・UKCA marking a) Electrical equipment safety regulations: EN61010-1, b) EMC regulations: EN61326-1, C) RoHS regulations: EN IEC 63000 *Other product numbers are available.

  • Product

    Digital indicating controller (temperature controller) SA200

Share this product


350+ people viewing

Last viewed: 2 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Digital indicating controller (temperature controller) SA200

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power supply voltage Waterproof dustproof Applicable standards Mass Alarm 2 type Alarm 1 type Permissible ambient humidity Permissible ambient temperature Withstand voltage Insulation resistance Measurement accuracy Body color Effect of external resistance External dimensions Basic type Control operation Output 2 (control output or alarm output) Output 1 (control output or alarm output) Input/range Number of input points Operation when input is disconnected Effects of power outage Usage atmosphere Memory backup Digital filter Sampling period Other conditions PV bias LCD display Option
Digital indicating controller (temperature controller) SA200-Part Number-SA200FK01-MN-3*NN-NN/N

SA200FK01-MN-3*NN-NN/N

Available upon quote

AC/DC 24V

No waterproof/dustproof structure

UL: UL61010-1
C-UL: CAN/CSA-C22.2 NO.61010-1

Approximately 110g

No alarm function

No alarm function

5~95%RH (no condensation)

-10~+55℃

Between measurement terminal and ground: AC 1,500V for 1 minute
Between power terminal and ground: AC 1,500V for 1 minute

Between measurement terminal and ground: DC 500V 20MΩ or more
Between power terminal and ground: DC 500V 20MΩ or more

± (0.3% of display value + 1 digit) or ±2℃ (within whichever is larger)

White tone

Approximately 0.2μV/Ω

48×24×100mm (width x length x depth)

48×24mm size temperature controller

PID operation with AT (reverse operation)

No output

Relay contact output

Thermocouple: K (JIS/IEC)
Range range: 0~200℃

1 point

Upscale

Power outages of 20msec or less will not affect operation.

No corrosive or flammable gases, and no heavy dust.

Data backup using non-volatile memory (data storage retention period approximately 10 years)

1~100 seconds (when set to 0: OFF)

0.5 seconds (switchable to 0.25 seconds)

No external noise and no direct vibration or impact.
A place that is not exposed to direct sunlight.

-Span~+Span (within -1,999~+9,999digit)

Temperature measurement value (PV): Green display
Temperature set value (SV): Orange display
AT・OUT1/2: Green display
SV2・ALM1/2: Orange display

No optional features

Digital indicating controller (temperature controller) SA200-Part Number-SA200FK01-MN-3*NN-NN/A

SA200FK01-MN-3*NN-NN/A

Available upon quote

AC/DC 24V

No waterproof/dustproof structure

UL: UL61010-1
C-UL: CAN/CSA-C22.2 NO.61010-1

Approximately 110g

No alarm function

No alarm function

5~95%RH (no condensation)

-10~+55℃

Between measurement terminal and ground: AC 1,500V for 1 minute
Between power terminal and ground: AC 1,500V for 1 minute

Between measurement terminal and ground: DC 500V 20MΩ or more
Between power terminal and ground: DC 500V 20MΩ or more

± (0.3% of display value + 1 digit) or ±2℃ (within whichever is larger)

Black tone

Approximately 0.2μV/Ω

48×24×100mm (width x length x depth)

48×24mm size temperature controller

PID operation with AT (reverse operation)

No output

Relay contact output

Thermocouple: K (JIS/IEC)
Range range: 0~200℃

1 point

Upscale

Power outages of 20msec or less will not affect operation.

No corrosive or flammable gases, and no heavy dust.

Data backup using non-volatile memory (data storage retention period approximately 10 years)

1~100 seconds (when set to 0: OFF)

0.5 seconds (switchable to 0.25 seconds)

No external noise and no direct vibration or impact.
A place that is not exposed to direct sunlight.

-Span~+Span (within -1,999~+9,999digit)

Temperature measurement value (PV): Green display
Temperature set value (SV): Orange display
AT・OUT1/2: Green display
SV2・ALM1/2: Orange display

No optional features

Digital indicating controller (temperature controller) SA200-Part Number-SA200FK01-MN-3*NN-N1/N

SA200FK01-MN-3*NN-N1/N

Available upon quote

AC/DC 24V

Waterproof and dustproof structure available

UL: UL61010-1
C-UL: CAN/CSA-C22.2 NO.61010-1

Approximately 110g

No alarm function

No alarm function

5~95%RH (no condensation)

-10~+55℃

Between measurement terminal and ground: AC 1,500V for 1 minute
Between power terminal and ground: AC 1,500V for 1 minute

Between measurement terminal and ground: DC 500V 20MΩ or more
Between power terminal and ground: DC 500V 20MΩ or more

± (0.3% of display value + 1 digit) or ±2℃ (within whichever is larger)

White tone

Approximately 0.2μV/Ω

48×24×100mm (width x length x depth)

48×24mm size temperature controller

PID operation with AT (reverse operation)

No output

Relay contact output

Thermocouple: K (JIS/IEC)
Range range: 0~200℃

1 point

Upscale

Power outages of 20msec or less will not affect operation.

No corrosive or flammable gases, and no heavy dust.

Data backup using non-volatile memory (data storage retention period approximately 10 years)

1~100 seconds (when set to 0: OFF)

0.5 seconds (switchable to 0.25 seconds)

No external noise and no direct vibration or impact.
A place that is not exposed to direct sunlight.

-Span~+Span (within -1,999~+9,999digit)

Temperature measurement value (PV): Green display
Temperature set value (SV): Orange display
AT・OUT1/2: Green display
SV2・ALM1/2: Orange display

No optional features

Digital indicating controller (temperature controller) SA200-Part Number-SA200FK01-MN-3*NN-N1/A

SA200FK01-MN-3*NN-N1/A

Available upon quote

AC/DC 24V

Waterproof and dustproof structure available

UL: UL61010-1
C-UL: CAN/CSA-C22.2 NO.61010-1

Approximately 110g

No alarm function

No alarm function

5~95%RH (no condensation)

-10~+55℃

Between measurement terminal and ground: AC 1,500V for 1 minute
Between power terminal and ground: AC 1,500V for 1 minute

Between measurement terminal and ground: DC 500V 20MΩ or more
Between power terminal and ground: DC 500V 20MΩ or more

± (0.3% of display value + 1 digit) or ±2℃ (within whichever is larger)

Black tone

Approximately 0.2μV/Ω

48×24×100mm (width x length x depth)

48×24mm size temperature controller

PID operation with AT (reverse operation)

No output

Relay contact output

Thermocouple: K (JIS/IEC)
Range range: 0~200℃

1 point

Upscale

Power outages of 20msec or less will not affect operation.

No corrosive or flammable gases, and no heavy dust.

Data backup using non-volatile memory (data storage retention period approximately 10 years)

1~100 seconds (when set to 0: OFF)

0.5 seconds (switchable to 0.25 seconds)

No external noise and no direct vibration or impact.
A place that is not exposed to direct sunlight.

-Span~+Span (within -1,999~+9,999digit)

Temperature measurement value (PV): Green display
Temperature set value (SV): Orange display
AT・OUT1/2: Green display
SV2・ALM1/2: Orange display

No optional features

Digital indicating controller (temperature controller) SA200-Part Number-SA200FK01-MN-3*NN-5N/N

SA200FK01-MN-3*NN-5N/N

Available upon quote

AC/DC 24V

No waterproof/dustproof structure

UL: UL61010-1
C-UL: CAN/CSA-C22.2 NO.61010-1

Approximately 110g

No alarm function

No alarm function

5~95%RH (no condensation)

-10~+55℃

Between measurement terminal and ground: AC 1,500V for 1 minute
Between power terminal and ground: AC 1,500V for 1 minute

Between measurement terminal and ground: DC 500V 20MΩ or more
Between power terminal and ground: DC 500V 20MΩ or more

± (0.3% of display value + 1 digit) or ±2℃ (within whichever is larger)

White tone

Approximately 0.2μV/Ω

48×24×100mm (width x length x depth)

48×24mm size temperature controller

PID operation with AT (reverse operation)

No output

Relay contact output

Thermocouple: K (JIS/IEC)
Range range: 0~200℃

1 point

Upscale

Power outages of 20msec or less will not affect operation.

No corrosive or flammable gases, and no heavy dust.

Data backup using non-volatile memory (data storage retention period approximately 10 years)

1~100 seconds (when set to 0: OFF)

0.5 seconds (switchable to 0.25 seconds)

No external noise and no direct vibration or impact.
A place that is not exposed to direct sunlight.

-Span~+Span (within -1,999~+9,999digit)

Temperature measurement value (PV): Green display
Temperature set value (SV): Orange display
AT・OUT1/2: Green display
SV2・ALM1/2: Orange display

Communication function: RS-485 compliant (RKC standard)

Digital indicating controller (temperature controller) SA200-Part Number-SA200FK01-MN-3*NN-5N/A

SA200FK01-MN-3*NN-5N/A

Available upon quote

AC/DC 24V

No waterproof/dustproof structure

UL: UL61010-1
C-UL: CAN/CSA-C22.2 NO.61010-1

Approximately 110g

No alarm function

No alarm function

5~95%RH (no condensation)

-10~+55℃

Between measurement terminal and ground: AC 1,500V for 1 minute
Between power terminal and ground: AC 1,500V for 1 minute

Between measurement terminal and ground: DC 500V 20MΩ or more
Between power terminal and ground: DC 500V 20MΩ or more

± (0.3% of display value + 1 digit) or ±2℃ (within whichever is larger)

Black tone

Approximately 0.2μV/Ω

48×24×100mm (width x length x depth)

48×24mm size temperature controller

PID operation with AT (reverse operation)

No output

Relay contact output

Thermocouple: K (JIS/IEC)
Range range: 0~200℃

1 point

Upscale

Power outages of 20msec or less will not affect operation.

No corrosive or flammable gases, and no heavy dust.

Data backup using non-volatile memory (data storage retention period approximately 10 years)

1~100 seconds (when set to 0: OFF)

0.5 seconds (switchable to 0.25 seconds)

No external noise and no direct vibration or impact.
A place that is not exposed to direct sunlight.

-Span~+Span (within -1,999~+9,999digit)

Temperature measurement value (PV): Green display
Temperature set value (SV): Orange display
AT・OUT1/2: Green display
SV2・ALM1/2: Orange display

Communication function: RS-485 compliant (RKC standard)

Digital indicating controller (temperature controller) SA200-Part Number-SA200FK01-MN-3*NN-51/N

SA200FK01-MN-3*NN-51/N

Available upon quote

AC/DC 24V

Waterproof and dustproof structure available

UL: UL61010-1
C-UL: CAN/CSA-C22.2 NO.61010-1

Approximately 110g

No alarm function

No alarm function

5~95%RH (no condensation)

-10~+55℃

Between measurement terminal and ground: AC 1,500V for 1 minute
Between power terminal and ground: AC 1,500V for 1 minute

Between measurement terminal and ground: DC 500V 20MΩ or more
Between power terminal and ground: DC 500V 20MΩ or more

± (0.3% of display value + 1 digit) or ±2℃ (within whichever is larger)

White tone

Approximately 0.2μV/Ω

48×24×100mm (width x length x depth)

48×24mm size temperature controller

PID operation with AT (reverse operation)

No output

Relay contact output

Thermocouple: K (JIS/IEC)
Range range: 0~200℃

1 point

Upscale

Power outages of 20msec or less will not affect operation.

No corrosive or flammable gases, and no heavy dust.

Data backup using non-volatile memory (data storage retention period approximately 10 years)

1~100 seconds (when set to 0: OFF)

0.5 seconds (switchable to 0.25 seconds)

No external noise and no direct vibration or impact.
A place that is not exposed to direct sunlight.

-Span~+Span (within -1,999~+9,999digit)

Temperature measurement value (PV): Green display
Temperature set value (SV): Orange display
AT・OUT1/2: Green display
SV2・ALM1/2: Orange display

Communication function: RS-485 compliant (RKC standard)

Digital indicating controller (temperature controller) SA200-Part Number-SA200FK01-MN-3*NN-51/A

SA200FK01-MN-3*NN-51/A

Available upon quote

AC/DC 24V

Waterproof and dustproof structure available

UL: UL61010-1
C-UL: CAN/CSA-C22.2 NO.61010-1

Approximately 110g

No alarm function

No alarm function

5~95%RH (no condensation)

-10~+55℃

Between measurement terminal and ground: AC 1,500V for 1 minute
Between power terminal and ground: AC 1,500V for 1 minute

Between measurement terminal and ground: DC 500V 20MΩ or more
Between power terminal and ground: DC 500V 20MΩ or more

± (0.3% of display value + 1 digit) or ±2℃ (within whichever is larger)

Black tone

Approximately 0.2μV/Ω

48×24×100mm (width x length x depth)

48×24mm size temperature controller

PID operation with AT (reverse operation)

No output

Relay contact output

Thermocouple: K (JIS/IEC)
Range range: 0~200℃

1 point

Upscale

Power outages of 20msec or less will not affect operation.

No corrosive or flammable gases, and no heavy dust.

Data backup using non-volatile memory (data storage retention period approximately 10 years)

1~100 seconds (when set to 0: OFF)

0.5 seconds (switchable to 0.25 seconds)

No external noise and no direct vibration or impact.
A place that is not exposed to direct sunlight.

-Span~+Span (within -1,999~+9,999digit)

Temperature measurement value (PV): Green display
Temperature set value (SV): Orange display
AT・OUT1/2: Green display
SV2・ALM1/2: Orange display

Communication function: RS-485 compliant (RKC standard)

Digital indicating controller (temperature controller) SA200-Part Number-SA200FK01-MN-3*NN-6N/N

SA200FK01-MN-3*NN-6N/N

Available upon quote

AC/DC 24V

No waterproof/dustproof structure

UL: UL61010-1
C-UL: CAN/CSA-C22.2 NO.61010-1

Approximately 110g

No alarm function

No alarm function

5~95%RH (no condensation)

-10~+55℃

Between measurement terminal and ground: AC 1,500V for 1 minute
Between power terminal and ground: AC 1,500V for 1 minute

Between measurement terminal and ground: DC 500V 20MΩ or more
Between power terminal and ground: DC 500V 20MΩ or more

± (0.3% of display value + 1 digit) or ±2℃ (within whichever is larger)

White tone

Approximately 0.2μV/Ω

48×24×100mm (width x length x depth)

48×24mm size temperature controller

PID operation with AT (reverse operation)

No output

Relay contact output

Thermocouple: K (JIS/IEC)
Range range: 0~200℃

1 point

Upscale

Power outages of 20msec or less will not affect operation.

No corrosive or flammable gases, and no heavy dust.

Data backup using non-volatile memory (data storage retention period approximately 10 years)

1~100 seconds (when set to 0: OFF)

0.5 seconds (switchable to 0.25 seconds)

No external noise and no direct vibration or impact.
A place that is not exposed to direct sunlight.

-Span~+Span (within -1,999~+9,999digit)

Temperature measurement value (PV): Green display
Temperature set value (SV): Orange display
AT・OUT1/2: Green display
SV2・ALM1/2: Orange display

Communication function: RS-485 compliant (MODBUS)

Digital indicating controller (temperature controller) SA200-Part Number-SA200FK01-MN-3*NN-6N/A

SA200FK01-MN-3*NN-6N/A

Available upon quote

AC/DC 24V

No waterproof/dustproof structure

UL: UL61010-1
C-UL: CAN/CSA-C22.2 NO.61010-1

Approximately 110g

No alarm function

No alarm function

5~95%RH (no condensation)

-10~+55℃

Between measurement terminal and ground: AC 1,500V for 1 minute
Between power terminal and ground: AC 1,500V for 1 minute

Between measurement terminal and ground: DC 500V 20MΩ or more
Between power terminal and ground: DC 500V 20MΩ or more

± (0.3% of display value + 1 digit) or ±2℃ (within whichever is larger)

Black tone

Approximately 0.2μV/Ω

48×24×100mm (width x length x depth)

48×24mm size temperature controller

PID operation with AT (reverse operation)

No output

Relay contact output

Thermocouple: K (JIS/IEC)
Range range: 0~200℃

1 point

Upscale

Power outages of 20msec or less will not affect operation.

No corrosive or flammable gases, and no heavy dust.

Data backup using non-volatile memory (data storage retention period approximately 10 years)

1~100 seconds (when set to 0: OFF)

0.5 seconds (switchable to 0.25 seconds)

No external noise and no direct vibration or impact.
A place that is not exposed to direct sunlight.

-Span~+Span (within -1,999~+9,999digit)

Temperature measurement value (PV): Green display
Temperature set value (SV): Orange display
AT・OUT1/2: Green display
SV2・ALM1/2: Orange display

Communication function: RS-485 compliant (MODBUS)

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Temperature Controllers Products

Other products of RKC INSTRUMENT

Reviews shown here are reviews of companies.


View more products of RKC INSTRUMENT

About Company Handling This Product

Response Rate

100.0%


Response Time

14.3hrs

Company Overview

RKC Instrument has been continually growing for over half a century and strives to be a solution provider of m...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree