All Categories

History

Digital indicating controller (temperature controller) RB series-RB100FK01-MN-3*NN-NN/NN
Digital indicating controller (temperature controller) RB series-RKC INSTRUMENT

Digital indicating controller (temperature controller) RB series
RKC INSTRUMENT

RKC INSTRUMENT's Response Status

Response Rate

100.0%

Response Time

14.3hours

Relatively Fast Response


About This Product

■4 types of setting values ​​can be registered

Up to 4 set values ​​(SV) can be registered and switched, and switching using digital input is also possible.

■Various input/output

A wide range of combinations of various input/output options are available. *The number of digital output points is limited depending on the model and specifications. *Analog output may not be available depending on the control type and model. *For RB100, either communication or digital input must be selected.

■Responsiveness can be changed

You can easily change the response to the controllability obtained through auto-tuning. You can select the desired responsiveness with 6 settings.

■Equipped with loader communication

- All models are equipped with a loader communication port. ・Protem2, a controller and indicator setting data management support tool, is available.

■General specifications

・Power supply voltage (rated): AC100~240V / AC24V / DC24V ・Mass: RB100 approx. 120g, RB400 approx. 185g, RB500 approx. 190g, RB700 approx. 200g, RB900 approx. 250g *Other product numbers are available.

  • Product

    Digital indicating controller (temperature controller) RB series

Share this product


350+ people viewing

Last viewed: 2 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Digital indicating controller (temperature controller) RB series

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power supply voltage Waterproof and dustproof structure Communication function/digital input Permissible ambient temperature Settings lock Insulation resistance Inrush current Power consumption Error during close instrumentation Effect of ambient temperature (5 to 40℃) Control operation Output 2 (OUT2) Control output Output 1 (OUT1) Control output Number of input points Operation when input is disconnected Input/range Input impedance Effects of power outage Effect of signal source resistance Repeat function Memory backup CT input for heater burnout alarm Digital output Digital input/output/factory setting Digital filter Timer time setting Sampling period Size Case color PV bias
Digital indicating controller (temperature controller) RB series-Part Number-RB100FK01-MN-3*NN-NN/NN

RB100FK01-MN-3*NN-NN/NN

Available upon quote

AC/DC24V

No waterproof/dustproof structure

None

0~50℃

Key lock level setting: Set the level from 0 to 10

Between measurement terminal and ground 500V DC 20MΩ or more
Between power terminal and ground: DC500V 20MΩ or more

16.3A or less (at 24V AC), 11.5A or less (at 24V DC)

Maximum 8.5VA (at AC240V)
Maximum 4.7VA (at AC24V)
Maximum 108mA (at 24V DC)

Within ±2.0 (within ±3.5 when input is below -100℃)

± (0.06) ℃/℃

PID operation with AT (reverse operation)

None

Relay contact output

1 point

Up/Downscale (select one)

Thermoelectric body (temperature input group): 0~200℃

1MΩ or more

Operation is not affected by power outages of 10msec or less

Approximately 0.25μV/Ω

0~9,999 (infinite with 9,999 setting)

Backup with non-volatile memory (Number of writes: approx. 1 million times, data retention period: approx. 10 years)

None

None

None (Shipped with default value) *No initial set code specified

Variable from 0 to 100 seconds *The filter is OFF when set to 0

00:01 to 99:59 or 00:01 to 99:59

0.25 seconds

48mm×48mm (width x length)

White tone

-1,999 (-199.9) ~9,999 (999.9) ℃

Digital indicating controller (temperature controller) RB series-Part Number-RB100FK01-MN-3*NN-NN/AN

RB100FK01-MN-3*NN-NN/AN

Available upon quote

AC/DC24V

No waterproof/dustproof structure

None

0~50℃

Key lock level setting: Set the level from 0 to 10

Between measurement terminal and ground 500V DC 20MΩ or more
Between power terminal and ground: DC500V 20MΩ or more

16.3A or less (at 24V AC), 11.5A or less (at 24V DC)

Maximum 8.5VA (at AC240V)
Maximum 4.7VA (at AC24V)
Maximum 108mA (at 24V DC)

Within ±2.0 (within ±3.5 when input is below -100℃)

± (0.06) ℃/℃

PID operation with AT (reverse operation)

None

Relay contact output

1 point

Up/Downscale (select one)

Thermoelectric body (temperature input group): 0~200℃

1MΩ or more

Operation is not affected by power outages of 10msec or less

Approximately 0.25μV/Ω

0~9,999 (infinite with 9,999 setting)

Backup with non-volatile memory (Number of writes: approx. 1 million times, data retention period: approx. 10 years)

None

None

None (Shipped with default value) *No initial set code specified

Variable from 0 to 100 seconds *The filter is OFF when set to 0

00:01 to 99:59 or 00:01 to 99:59

0.25 seconds

48mm×48mm (width x length)

Black tone

-1,999 (-199.9) ~9,999 (999.9) ℃

Digital indicating controller (temperature controller) RB series-Part Number-RB100FK01-MN-3*NN-N1/NN

RB100FK01-MN-3*NN-N1/NN

Available upon quote

AC/DC24V

Waterproof and dustproof (NEMA 4X, IP66) compliant

None

0~50℃

Key lock level setting: Set the level from 0 to 10

Between measurement terminal and ground 500V DC 20MΩ or more
Between power terminal and ground: DC500V 20MΩ or more

16.3A or less (at 24V AC), 11.5A or less (at 24V DC)

Maximum 8.5VA (at AC240V)
Maximum 4.7VA (at AC24V)
Maximum 108mA (at 24V DC)

Within ±2.0 (within ±3.5 when input is below -100℃)

± (0.06) ℃/℃

PID operation with AT (reverse operation)

None

Relay contact output

1 point

Up/Downscale (select one)

Thermoelectric body (temperature input group): 0~200℃

1MΩ or more

Operation is not affected by power outages of 10msec or less

Approximately 0.25μV/Ω

0~9,999 (infinite with 9,999 setting)

Backup with non-volatile memory (Number of writes: approx. 1 million times, data retention period: approx. 10 years)

None

None

None (Shipped with default value) *No initial set code specified

Variable from 0 to 100 seconds *The filter is OFF when set to 0

00:01 to 99:59 or 00:01 to 99:59

0.25 seconds

48mm×48mm (width x length)

White tone

-1,999 (-199.9) ~9,999 (999.9) ℃

Digital indicating controller (temperature controller) RB series-Part Number-RB100FK01-MN-3*NN-N1/AN

RB100FK01-MN-3*NN-N1/AN

Available upon quote

AC/DC24V

Waterproof and dustproof (NEMA 4X, IP66) compliant

None

0~50℃

Key lock level setting: Set the level from 0 to 10

Between measurement terminal and ground 500V DC 20MΩ or more
Between power terminal and ground: DC500V 20MΩ or more

16.3A or less (at 24V AC), 11.5A or less (at 24V DC)

Maximum 8.5VA (at AC240V)
Maximum 4.7VA (at AC24V)
Maximum 108mA (at 24V DC)

Within ±2.0 (within ±3.5 when input is below -100℃)

± (0.06) ℃/℃

PID operation with AT (reverse operation)

None

Relay contact output

1 point

Up/Downscale (select one)

Thermoelectric body (temperature input group): 0~200℃

1MΩ or more

Operation is not affected by power outages of 10msec or less

Approximately 0.25μV/Ω

0~9,999 (infinite with 9,999 setting)

Backup with non-volatile memory (Number of writes: approx. 1 million times, data retention period: approx. 10 years)

None

None

None (Shipped with default value) *No initial set code specified

Variable from 0 to 100 seconds *The filter is OFF when set to 0

00:01 to 99:59 or 00:01 to 99:59

0.25 seconds

48mm×48mm (width x length)

Black tone

-1,999 (-199.9) ~9,999 (999.9) ℃

Digital indicating controller (temperature controller) RB series-Part Number-RB100FK01-MN-3*NN-5N/NN

RB100FK01-MN-3*NN-5N/NN

Available upon quote

AC/DC24V

No waterproof/dustproof structure

RS-485 (RKC standard protocol)

0~50℃

Key lock level setting: Set the level from 0 to 10

Between measurement terminal and ground 500V DC 20MΩ or more
Between power terminal and ground: DC500V 20MΩ or more

16.3A or less (at 24V AC), 11.5A or less (at 24V DC)

Maximum 8.5VA (at AC240V)
Maximum 4.7VA (at AC24V)
Maximum 108mA (at 24V DC)

Within ±2.0 (within ±3.5 when input is below -100℃)

± (0.06) ℃/℃

PID operation with AT (reverse operation)

None

Relay contact output

1 point

Up/Downscale (select one)

Thermoelectric body (temperature input group): 0~200℃

1MΩ or more

Operation is not affected by power outages of 10msec or less

Approximately 0.25μV/Ω

0~9,999 (infinite with 9,999 setting)

Backup with non-volatile memory (Number of writes: approx. 1 million times, data retention period: approx. 10 years)

None

None

None (Shipped with default value) *No initial set code specified

Variable from 0 to 100 seconds *The filter is OFF when set to 0

00:01 to 99:59 or 00:01 to 99:59

0.25 seconds

48mm×48mm (width x length)

White tone

-1,999 (-199.9) ~9,999 (999.9) ℃

Digital indicating controller (temperature controller) RB series-Part Number-RB100FK01-MN-3*NN-5N/AN

RB100FK01-MN-3*NN-5N/AN

Available upon quote

AC/DC24V

No waterproof/dustproof structure

RS-485 (RKC standard protocol)

0~50℃

Key lock level setting: Set the level from 0 to 10

Between measurement terminal and ground 500V DC 20MΩ or more
Between power terminal and ground: DC500V 20MΩ or more

16.3A or less (at 24V AC), 11.5A or less (at 24V DC)

Maximum 8.5VA (at AC240V)
Maximum 4.7VA (at AC24V)
Maximum 108mA (at 24V DC)

Within ±2.0 (within ±3.5 when input is below -100℃)

± (0.06) ℃/℃

PID operation with AT (reverse operation)

None

Relay contact output

1 point

Up/Downscale (select one)

Thermoelectric body (temperature input group): 0~200℃

1MΩ or more

Operation is not affected by power outages of 10msec or less

Approximately 0.25μV/Ω

0~9,999 (infinite with 9,999 setting)

Backup with non-volatile memory (Number of writes: approx. 1 million times, data retention period: approx. 10 years)

None

None

None (Shipped with default value) *No initial set code specified

Variable from 0 to 100 seconds *The filter is OFF when set to 0

00:01 to 99:59 or 00:01 to 99:59

0.25 seconds

48mm×48mm (width x length)

Black tone

-1,999 (-199.9) ~9,999 (999.9) ℃

Digital indicating controller (temperature controller) RB series-Part Number-RB100FK01-MN-3*NN-51/NN

RB100FK01-MN-3*NN-51/NN

Available upon quote

AC/DC24V

Waterproof and dustproof (NEMA 4X, IP66) compliant

RS-485 (RKC standard protocol)

0~50℃

Key lock level setting: Set the level from 0 to 10

Between measurement terminal and ground 500V DC 20MΩ or more
Between power terminal and ground: DC500V 20MΩ or more

16.3A or less (at 24V AC), 11.5A or less (at 24V DC)

Maximum 8.5VA (at AC240V)
Maximum 4.7VA (at AC24V)
Maximum 108mA (at 24V DC)

Within ±2.0 (within ±3.5 when input is below -100℃)

± (0.06) ℃/℃

PID operation with AT (reverse operation)

None

Relay contact output

1 point

Up/Downscale (select one)

Thermoelectric body (temperature input group): 0~200℃

1MΩ or more

Operation is not affected by power outages of 10msec or less

Approximately 0.25μV/Ω

0~9,999 (infinite with 9,999 setting)

Backup with non-volatile memory (Number of writes: approx. 1 million times, data retention period: approx. 10 years)

None

None

None (Shipped with default value) *No initial set code specified

Variable from 0 to 100 seconds *The filter is OFF when set to 0

00:01 to 99:59 or 00:01 to 99:59

0.25 seconds

48mm×48mm (width x length)

White tone

-1,999 (-199.9) ~9,999 (999.9) ℃

Digital indicating controller (temperature controller) RB series-Part Number-RB100FK01-MN-3*NN-51/AN

RB100FK01-MN-3*NN-51/AN

Available upon quote

AC/DC24V

Waterproof and dustproof (NEMA 4X, IP66) compliant

RS-485 (RKC standard protocol)

0~50℃

Key lock level setting: Set the level from 0 to 10

Between measurement terminal and ground 500V DC 20MΩ or more
Between power terminal and ground: DC500V 20MΩ or more

16.3A or less (at 24V AC), 11.5A or less (at 24V DC)

Maximum 8.5VA (at AC240V)
Maximum 4.7VA (at AC24V)
Maximum 108mA (at 24V DC)

Within ±2.0 (within ±3.5 when input is below -100℃)

± (0.06) ℃/℃

PID operation with AT (reverse operation)

None

Relay contact output

1 point

Up/Downscale (select one)

Thermoelectric body (temperature input group): 0~200℃

1MΩ or more

Operation is not affected by power outages of 10msec or less

Approximately 0.25μV/Ω

0~9,999 (infinite with 9,999 setting)

Backup with non-volatile memory (Number of writes: approx. 1 million times, data retention period: approx. 10 years)

None

None

None (Shipped with default value) *No initial set code specified

Variable from 0 to 100 seconds *The filter is OFF when set to 0

00:01 to 99:59 or 00:01 to 99:59

0.25 seconds

48mm×48mm (width x length)

Black tone

-1,999 (-199.9) ~9,999 (999.9) ℃

Digital indicating controller (temperature controller) RB series-Part Number-RB100FK01-MN-3*NN-6N/NN

RB100FK01-MN-3*NN-6N/NN

Available upon quote

AC/DC24V

No waterproof/dustproof structure

RS-485 (MODBUS protocol)

0~50℃

Key lock level setting: Set the level from 0 to 10

Between measurement terminal and ground 500V DC 20MΩ or more
Between power terminal and ground: DC500V 20MΩ or more

16.3A or less (at 24V AC), 11.5A or less (at 24V DC)

Maximum 8.5VA (at AC240V)
Maximum 4.7VA (at AC24V)
Maximum 108mA (at 24V DC)

Within ±2.0 (within ±3.5 when input is below -100℃)

± (0.06) ℃/℃

PID operation with AT (reverse operation)

None

Relay contact output

1 point

Up/Downscale (select one)

Thermoelectric body (temperature input group): 0~200℃

1MΩ or more

Operation is not affected by power outages of 10msec or less

Approximately 0.25μV/Ω

0~9,999 (infinite with 9,999 setting)

Backup with non-volatile memory (Number of writes: approx. 1 million times, data retention period: approx. 10 years)

None

None

None (Shipped with default value) *No initial set code specified

Variable from 0 to 100 seconds *The filter is OFF when set to 0

00:01 to 99:59 or 00:01 to 99:59

0.25 seconds

48mm×48mm (width x length)

White tone

-1,999 (-199.9) ~9,999 (999.9) ℃

Digital indicating controller (temperature controller) RB series-Part Number-RB100FK01-MN-3*NN-6N/AN

RB100FK01-MN-3*NN-6N/AN

Available upon quote

AC/DC24V

No waterproof/dustproof structure

RS-485 (MODBUS protocol)

0~50℃

Key lock level setting: Set the level from 0 to 10

Between measurement terminal and ground 500V DC 20MΩ or more
Between power terminal and ground: DC500V 20MΩ or more

16.3A or less (at 24V AC), 11.5A or less (at 24V DC)

Maximum 8.5VA (at AC240V)
Maximum 4.7VA (at AC24V)
Maximum 108mA (at 24V DC)

Within ±2.0 (within ±3.5 when input is below -100℃)

± (0.06) ℃/℃

PID operation with AT (reverse operation)

None

Relay contact output

1 point

Up/Downscale (select one)

Thermoelectric body (temperature input group): 0~200℃

1MΩ or more

Operation is not affected by power outages of 10msec or less

Approximately 0.25μV/Ω

0~9,999 (infinite with 9,999 setting)

Backup with non-volatile memory (Number of writes: approx. 1 million times, data retention period: approx. 10 years)

None

None

None (Shipped with default value) *No initial set code specified

Variable from 0 to 100 seconds *The filter is OFF when set to 0

00:01 to 99:59 or 00:01 to 99:59

0.25 seconds

48mm×48mm (width x length)

Black tone

-1,999 (-199.9) ~9,999 (999.9) ℃

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Temperature Controllers Products

Other products of RKC INSTRUMENT

Reviews shown here are reviews of companies.


View more products of RKC INSTRUMENT

About Company Handling This Product

Response Rate

100.0%


Response Time

14.3hrs

Company Overview

RKC Instrument has been continually growing for over half a century and strives to be a solution provider of m...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree