All Categories

History

  1. Metoree
  2. Clamps & Fasteners
  3. Chucks
  4. 4-jaw weight-reducing manual chuck INOFlex®VL (NK Works Co., Ltd.)
4-jaw weight-reducing manual chuck INOFlex®VL-VL042
4-jaw weight-reducing manual chuck INOFlex®VL-NK Works Co., Ltd.

4-jaw weight-reducing manual chuck INOFlex®VL
NK Works Co., Ltd.

NK Works Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

37.1hours

About This Product

■Product overview

INOFlex® is a flexible chuck suitable for almost all clamping tasks on modern machine tools. Regardless of workpiece geometry, workpiece material or type of machining, INOFlex® solves all clamping challenges. With four jaws and a patented correction mechanism, rotating workpieces and square timber workpieces can be safely clamped from the center. In particular, the compensation function ensures that all clamping points always have the same clamping force. Various combinations are possible by arranging the four jaws at a 90° pitch. For example, centering clamps can be performed using two opposing jaws. There is no need to do anything to the two unused jaws, and they can be left removed. Therefore, no special preparations are required for centering clamps with two jaws. If a clear reference edge is required, up to two fixed stops can be used instead of the 4-jaw and 2-jaw centering clamps. The two clamping axes each have a defined reference and are equivalent to clamping with fixed jaws.

■Product features

・Patented. Operating principle of 4-jaw correction function ・INOFlex® always applies force evenly to all four claws

■Use examples

``The workpiece has four surfaces, two of which are flat and the other two semicircular, making it almost impossible to clamp them properly with a conventional three-jaw chuck. ” the user recalls. “The advantage of the INOFlex® compensating four-jaw chuck is that component parts can always be correctly centered with high precision.” The workpiece before processing is made of zinc die-casting and has almost no processing tolerances. Needless to say, productivity has been greatly improved by eliminating the need for positioning work, which requires processing hundreds of workpieces each time.

■Application

・Clamping of round, square, rectangular, and irregularly shaped workpieces ・For milling/turning centers ・Inner diameter clamp/outer diameter clamp

■Technical features

・Center correction clamp with 4 jaws ・Centering clamp with 2 jaws ・Clamp with fixed stop - Lighter weight ・Centrifugal force correction

  • Product

    4-jaw weight-reducing manual chuck INOFlex®VL

Share this product


340+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

6 Models of 4-jaw weight-reducing manual chuck INOFlex®VL

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Weight (reference weight) (kg) Correction (radius) (mm) Diameter (mm) Standard hard jaws Standard soft jaws Standard t-nut Maximum rotation speed (1/min r.p.m.) Maximum gripping force 4 jaws (kN) Maximum gripping force 2 jaws (kN) Maximum torque (Nm) Moment of inertia (kg/m²) Jaw stroke (radius) (mm)
4-jaw weight-reducing manual chuck INOFlex®VL-Part Number-VL042

VL042

Available upon quote

86 (89)

3.5

420

VG16

VS16

GP11

1,800

110

55

145

1.6

5.2

4-jaw weight-reducing manual chuck INOFlex®VL-Part Number-VL060

VL060

Available upon quote

160 (173)

9.1

600

VG16

VP16

GP11

1,300

135

67.5

185

6.2

11.1

4-jaw weight-reducing manual chuck INOFlex®VL-Part Number-VL070

VL070

Available upon quote

181 (205)

9.1

700

VG16

VP16

GP11

1,200

135

67.5

185

9.9

11.1

4-jaw weight-reducing manual chuck INOFlex®VL-Part Number-VL080

VL080

Available upon quote

209 (250)

9.1

800

VG16

VP16

GP11

1,100

135

67.5

185

9.9

11.1

4-jaw weight-reducing manual chuck INOFlex®VL-Part Number-VL100

VL100

Available upon quote

478 (536)

9.3

990

VG21

VP21

GP13

850

200

100

280

52.4

11.3

4-jaw weight-reducing manual chuck INOFlex®VL-Part Number-VL120

VL120

Available upon quote

584 (688)

9.3

1,150

VG21

VP21

GP13

750

200

100

280

86.9

11.3

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

4 Nail Single Chuck Flange Standard Type 46 Series-Kawatatek Co., Ltd.

4 Nail Single Chuck Flange Standard Type 46 Series

Kawatatek Co., Ltd.

1130+ people viewing

Last viewed: 6 hours ago

Response time: 15.41 hours

Chucks

27 models listed

Actuator small parallel chuck series multi -type-Nihon Pisco Co., Ltd.

Actuator small parallel chuck series multi -type

Nihon Pisco Co., Ltd.

930+ people viewing

Last viewed: 3 hours ago

Response time: 32.51 hours

Chucks

30 models listed

4 Nail single chuck short tapered type 46 series-Kawatatek Co., Ltd.

4 Nail single chuck short tapered type 46 series

Kawatatek Co., Ltd.

620+ people viewing

Last viewed: 3 hours ago

Response time: 15.41 hours

Chucks

30 models listed

Gripping Technique Chuck Automatic Setup Change Quick Jaw Change Chuck HQJC-Matsumoto Machine Industry Co., Ltd.

Gripping Technique Chuck Automatic Setup Change Quick Jaw Change Chuck HQJC

Matsumoto Machine Industry Co., Ltd.

70+ people viewing

Last viewed: 3 hours ago

Response time: 46.98 hours

Chucks

3 models listed

Large independent chuck 44 series that can be replaced with claws type-Kawatatek Co., Ltd.

Large independent chuck 44 series that can be replaced with claws type

Kawatatek Co., Ltd.

390+ people viewing

Last viewed: 3 hours ago

Response time: 15.41 hours

Chucks

20 models listed

External clamp chuck (for lathe) SPANNTOP nova pullback (collet retractable type)-NK Works Co., Ltd.

External clamp chuck (for lathe) SPANNTOP nova pullback (collet retractable type)

NK Works Co., Ltd.

480+ people viewing

Last viewed: 20 minutes ago

Response time: 37.06 hours

Chucks

18 models listed

Gripping technique chuck general purpose hollow 3 jaw power chuck Z-Matsumoto Machine Industry Co., Ltd.

Gripping technique chuck general purpose hollow 3 jaw power chuck Z

Matsumoto Machine Industry Co., Ltd.

70+ people viewing

Last viewed: 3 hours ago

Response time: 46.98 hours

Chucks

2 models listed

Robot hand KUMADE CUP-Harmotech Co., Ltd.

Robot hand KUMADE CUP

Harmotech Co., Ltd.

50+ people viewing

Last viewed: 3 hours ago

Chucks

3 models listed

External clamp chuck (for lathe) SPANNTOP nova dead length (collet stationary type)-NK Works Co., Ltd.

External clamp chuck (for lathe) SPANNTOP nova dead length (collet stationary type)

NK Works Co., Ltd.

420+ people viewing

Last viewed: 3 hours ago

Response time: 37.06 hours

Chucks

6 models listed

Gripping Technique Chuck Hollow Big Bore 3 Jaw Power Chuck Z (Big Bore)-Matsumoto Machine Industry Co., Ltd.

Gripping Technique Chuck Hollow Big Bore 3 Jaw Power Chuck Z (Big Bore)

Matsumoto Machine Industry Co., Ltd.

70+ people viewing

Last viewed: 3 hours ago

Response time: 46.98 hours

Chucks

2 models listed

Strong grasp power and appropriate for heavy sharpening independent chuck steel type 41/42 series-Kawatatek Co., Ltd.

Strong grasp power and appropriate for heavy sharpening independent chuck steel type 41/42 series

Kawatatek Co., Ltd.

640+ people viewing

Last viewed: 9 minutes ago

Response time: 15.41 hours

Chucks

10 models listed

Robot hand development Wafer transfer EC type-Harmotech Co., Ltd.

Robot hand development Wafer transfer EC type

Harmotech Co., Ltd.

50+ people viewing

Last viewed: 3 hours ago

Chucks

2 models listed

See More Chucks Products

Other products of NK Works Co., Ltd.

Reviews shown here are reviews of companies.

Quick change collet chuck (for lathe)-NK Works Co., Ltd.

Quick change collet chuck (for lathe)

NK Works Co., Ltd.

170+ people viewing

Last viewed: 1 hour ago

Response time: 37.06 hours

Collet Chucks

3 models listed

External clamp chuck (for lathe) SPANNTOP nova pullback (collet retractable type)-NK Works Co., Ltd.

External clamp chuck (for lathe) SPANNTOP nova pullback (collet retractable type)

NK Works Co., Ltd.

480+ people viewing

Last viewed: 20 minutes ago

Response time: 37.06 hours

Collet Chucks

18 models listed

External clamp chuck (for lathe) SPANNTOP nova dead length (collet stationary type)-NK Works Co., Ltd.

External clamp chuck (for lathe) SPANNTOP nova dead length (collet stationary type)

NK Works Co., Ltd.

420+ people viewing

Last viewed: 3 hours ago

Response time: 37.06 hours

Chucks

6 models listed

External clamp chuck (for lathe) TOPlus pullback (collet retractable type)-NK Works Co., Ltd.

External clamp chuck (for lathe) TOPlus pullback (collet retractable type)

NK Works Co., Ltd.

220+ people viewing

Last viewed: 3 hours ago

Response time: 37.06 hours

Chucks

3 models listed

External clamp chuck (for lathe) TOPlus dead length (collet stationary type)-NK Works Co., Ltd.

External clamp chuck (for lathe) TOPlus dead length (collet stationary type)

NK Works Co., Ltd.

260+ people viewing

Last viewed: 3 hours ago

Response time: 37.06 hours

Chucks

3 models listed

Space-saving outer diameter clamp chuck SPNNTOP mini pullback (collet retractable type)-NK Works Co., Ltd.

Space-saving outer diameter clamp chuck SPNNTOP mini pullback (collet retractable type)

NK Works Co., Ltd.

410+ people viewing

Last viewed: 3 hours ago

Response time: 37.06 hours

Chucks

6 models listed

Space-saving outer diameter clamp chuck SPNNTOP mini dead length (collet stationary type)-NK Works Co., Ltd.

Space-saving outer diameter clamp chuck SPNNTOP mini dead length (collet stationary type)

NK Works Co., Ltd.

550+ people viewing

Last viewed: 10 hours ago

Response time: 37.06 hours

Chucks

6 models listed

Space-saving outer diameter clamp chuck TOPlus mini pullback (collet retractable type)-NK Works Co., Ltd.

Space-saving outer diameter clamp chuck TOPlus mini pullback (collet retractable type)

NK Works Co., Ltd.

370+ people viewing

Response time: 37.06 hours

Chucks

5 models listed

Space-saving outer diameter clamp chuck TOPlus mini dead length (collet stationary type)-NK Works Co., Ltd.

Space-saving outer diameter clamp chuck TOPlus mini dead length (collet stationary type)

NK Works Co., Ltd.

360+ people viewing

Last viewed: 11 hours ago

Response time: 37.06 hours

Chucks

5 models listed

Inner diameter clamp chuck MANDO T211 (collet retractable type)-NK Works Co., Ltd.

Inner diameter clamp chuck MANDO T211 (collet retractable type)

NK Works Co., Ltd.

430+ people viewing

Last viewed: 1 hour ago

Response time: 37.06 hours

ID Clamps

10 models listed

Vise/MC chuck Mandrel chuck High precision hydro chuck Threaded clamp system-NK Works Co., Ltd.

Vise/MC chuck Mandrel chuck High precision hydro chuck Threaded clamp system

NK Works Co., Ltd.

110+ people viewing

Last viewed: 1 hour ago

Response time: 37.06 hours

Hydraulic Vises

2 models listed

Pendulum clamping system jaw INOZet®-NK Works Co., Ltd.

Pendulum clamping system jaw INOZet®

NK Works Co., Ltd.

420+ people viewing

Response time: 37.06 hours

Chucks

10 models listed


View more products of NK Works Co., Ltd.

About Company Handling This Product

NK Works Co., Ltd.

Response Rate

100.0%

Response Time

37.1hrs

  • Japan

Related search keywords

Chucks
Chucks　NK Works Co., Ltd.
NK Works Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree