4-jaw hollow manual chuck INOFlex®VM-VM021

4-jaw hollow manual chuck INOFlex®VM
NK Works Co., Ltd.

NK Works Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

37.1hours

About This Product

■Product overviewINOFlex® is a flexible chuck suitable for almost all clamping tasks on modern machine tools. Regardless of workpiece geometry, workpiece material or type of machining, INOFlex® solves all clamping challenges. With four jaws and a patented correction mechanism, rotating workpieces and square timber workpieces can be safely clamped from the center.

In particular, the compensation function ensures that all clamping points always have the same clamping force. Various combinations are possible by arranging the four jaws at a 90° pitch.

For example, centering clamps can be performed using two opposing jaws. There is no need to do anything to the two unused jaws, and they can be left removed. Therefore, no special preparations are required for centering clamps with two jaws.

If a clear reference edge is required, up to two fixed stops can be used instead of the 4-jaw and 2-jaw centering clamps. The two clamping axes each have a defined reference and are equivalent to clamping with fixed jaws.

■Product features・Patented. Operating principle of 4-jaw correction function
・INOFlex® always applies force evenly to all four claws

■Use examples``The workpiece has four surfaces, two of which are flat and the other two semicircular, making it almost impossible to clamp them properly with a conventional three-jaw chuck. ” the user recalls. “The advantage of the INOFlex® compensating four-jaw chuck is that component parts can always be correctly centered with high precision.”

The workpiece before processing is made of zinc die-casting and has almost no processing tolerances. Needless to say, productivity has been greatly improved by eliminating the need for positioning work, which requires processing hundreds of workpieces each time.

■Application・Clamping of round, square, rectangular, and irregularly shaped workpieces
・Suitable for parts sensitive to deformation
・Clamping of hollow work/partially hollow work
・Inner diameter clamp/outer diameter clamp

■Technical features・Concentric correction clamp
・Clamp stroke control

Model
There are 4 models for this product.

Product
4-jaw hollow manual chuck INOFlex®VM

Handling Company
NK Works Co., Ltd.

Categories

Robots

Parallel Chucks

Clamps & Fasteners

Chucks

490+ people viewing

Last viewed: 19 minutes ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

4 Models of 4-jaw hollow manual chuck INOFlex®VM

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Weight (excluding top jaw) (kg)	Correction (radius) (mm)	Diameter (mm)	Standard hard jaws	Standard soft jaws	Standard t-nut	Maximum tightening torque (Nm)	Maximum gripping force (kN)	Maximum rotation speed (1/min r.p.m.)	Moment of inertia (kg/m²)	Through hole (mm)	Jaw stroke (radius) (mm)
VM021	Available upon quote	19.3	4.2	215	VG12	VS12	GP07	120	95	3,900	0.12	52	5.3
VM026	Available upon quote	33.5	5.3	260	VG17	VS17	GP11	160	110	3,100	0.32	72	6.4
VM031	Available upon quote	52.7	6.3	315	VG16	VS17	GP11	200	135	2,700	0.72	91	7.4
VM040	Available upon quote	107.3	7.4	400	VG21	VS21	GP13	270	170	1,900	2.63	111	8.5

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Actuator small parallel chuck series multi -type

Nihon Pisco Co., Ltd.

930+ people viewing

Last viewed: 3 hours ago

Response time: 32.51 hours

Parallel Chucks

30 models listed

Gripping Technique Chuck Automatic Setup Change Quick Jaw Change Chuck HQJC

Matsumoto Machine Industry Co., Ltd.

70+ people viewing

Last viewed: 3 hours ago

Response time: 46.98 hours

Parallel Chucks

3 models listed

4 Nail single chuck short tapered type 46 series

Kawatatek Co., Ltd.

620+ people viewing

Last viewed: 3 hours ago

Response time: 15.41 hours

Parallel Chucks

30 models listed

Actuator Small parallel chuck series Basic type

Nihon Pisco Co., Ltd.

450+ people viewing

Last viewed: 6 hours ago

Response time: 32.51 hours

Parallel Chucks

6 models listed

Gripping technique chuck general purpose hollow 3 jaw power chuck Z

Matsumoto Machine Industry Co., Ltd.

70+ people viewing

Last viewed: 3 hours ago

Response time: 46.98 hours

Parallel Chucks

2 models listed

Actuator Lever Chuck Series Single Moving Type

Nihon Pisco Co., Ltd.

$59.35

840+ people viewing

Last viewed: 4 hours ago

Response time: 32.51 hours

Parallel Chucks

32 models listed

Gripping Technique Chuck Hollow Big Bore 3 Jaw Power Chuck Z (Big Bore)

Matsumoto Machine Industry Co., Ltd.

70+ people viewing

Last viewed: 3 hours ago

Response time: 46.98 hours

Parallel Chucks

2 models listed

Actuator Lever Chuck Series Single Closed Type (K type student claw brank)

Nihon Pisco Co., Ltd.

$17.16

950+ people viewing

Last viewed: 9 hours ago

Response time: 32.51 hours

Parallel Chucks

40 models listed

Gripping Technique Chuck General Purpose Solid 3 Jaw Power Chuck Z-0

Matsumoto Machine Industry Co., Ltd.

60+ people viewing

Last viewed: 3 hours ago

Response time: 46.98 hours

Parallel Chucks

2 models listed

Actuator Lever Chuck Series Single Opening Type CHM_BA

Nihon Pisco Co., Ltd.

$55.77

930+ people viewing

Last viewed: 15 hours ago

Response time: 32.51 hours

Parallel Chucks

32 models listed

Gripping Technique Chuck Solid Long Stroke 3 Jaw Power Chuck ZL

Matsumoto Machine Industry Co., Ltd.

50+ people viewing

Last viewed: 3 hours ago

Response time: 46.98 hours

Parallel Chucks

2 models listed

Parallel opening/closing chuck

Machine Engineering Co., Ltd.

80+ people viewing

Last viewed: 3 hours ago

Parallel Chucks

2 models listed

See More Parallel Chucks Products

Other products of NK Works Co., Ltd.

Reviews shown here are reviews of companies.

Quick change collet chuck (for lathe)

NK Works Co., Ltd.

170+ people viewing

Last viewed: 1 hour ago

Response time: 37.06 hours

Collet Chucks

3 models listed

External clamp chuck (for lathe) SPANNTOP nova pullback (collet retractable type)

NK Works Co., Ltd.

480+ people viewing

Last viewed: 23 minutes ago

Response time: 37.06 hours

Collet Chucks

18 models listed

External clamp chuck (for lathe) SPANNTOP nova dead length (collet stationary type)

NK Works Co., Ltd.

420+ people viewing

Last viewed: 3 hours ago

Response time: 37.06 hours

Chucks

6 models listed

External clamp chuck (for lathe) TOPlus pullback (collet retractable type)

NK Works Co., Ltd.

220+ people viewing

Last viewed: 3 hours ago

Response time: 37.06 hours

Chucks

3 models listed

External clamp chuck (for lathe) TOPlus dead length (collet stationary type)

NK Works Co., Ltd.

260+ people viewing

Last viewed: 3 hours ago

Response time: 37.06 hours

Chucks

3 models listed

Space-saving outer diameter clamp chuck SPNNTOP mini pullback (collet retractable type)

NK Works Co., Ltd.

410+ people viewing

Last viewed: 3 hours ago

Response time: 37.06 hours

Chucks

6 models listed

Space-saving outer diameter clamp chuck SPNNTOP mini dead length (collet stationary type)

NK Works Co., Ltd.

550+ people viewing

Last viewed: 10 hours ago

Response time: 37.06 hours

Chucks

6 models listed

Space-saving outer diameter clamp chuck TOPlus mini pullback (collet retractable type)

NK Works Co., Ltd.

370+ people viewing

Response time: 37.06 hours

Chucks

5 models listed

Space-saving outer diameter clamp chuck TOPlus mini dead length (collet stationary type)

NK Works Co., Ltd.

360+ people viewing

Last viewed: 11 hours ago

Response time: 37.06 hours

Chucks

5 models listed

Inner diameter clamp chuck MANDO T211 (collet retractable type)

NK Works Co., Ltd.

430+ people viewing

Last viewed: 1 hour ago

Response time: 37.06 hours

ID Clamps

10 models listed

Vise/MC chuck Mandrel chuck High precision hydro chuck Threaded clamp system

NK Works Co., Ltd.

110+ people viewing

Last viewed: 1 hour ago

Response time: 37.06 hours

Hydraulic Vises

2 models listed

Pendulum clamping system jaw INOZet®

NK Works Co., Ltd.

420+ people viewing

Response time: 37.06 hours

Chucks

10 models listed

View more products of NK Works Co., Ltd.

About Company Handling This Product

NK Works Co., Ltd.

Response Rate

100.0%

Response Time

37.1hrs

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

4-jaw hollow manual chuck INOFlex®VM NK Works Co., Ltd.

NK Works Co., Ltd.'s Response Status

About This Product

■Product overview

■Product features

■Use examples

■Application

■Technical features

4 Models of 4-jaw hollow manual chuck INOFlex®VM

VM021

VM026

VM031

VM040

Customers who viewed this product also viewed

Other products of NK Works Co., Ltd.

About Company Handling This Product

Related search keywords

4-jaw hollow manual chuck INOFlex®VM
NK Works Co., Ltd.